Central Food Technological Research Institute Tender

Dismantling/ removing existing carpet/Vinyl sheet or tiles (1mm - 4mm thick) laid over mosaic or similar floors including disposal of unserviceable surplus material and stacking of serviceable material within 2 kmts lead or to the auction yard of CFTRI as directed by Engineer-in-charge.

Dismantling G.I pipes (exposed on wall) including all necessary fittings manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge: 15 mm to 40 mm nominal bore

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Removing sink of any size including stacking of useful materials within 50 metres lead or to the auction yard of CFTRI as directed by Engineer-in-charge.

Removing existing cooler and its fittings of any size including stacking of useful materials within 50 metres lead or to the auction yard of CFTRI as directed by Engineer-in-charge.

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: Asbestos sheet

Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: Of area beyond 3 sq. metres

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 M sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 M sand)

Providing and laying corrugated G.A coloured metal roofing sheet of thickness 0.5mm, 1.06m standard width with aluminium zinc alloy coated, 120 GSM powder coated having yeild strength of 450 N/mm2 including vertical/ curved surface fixed with stainless steel self tapping screws of length 55mm excluding the cost of purlins, rafters and trusses and including cutting the size and shape wherever required. 0.45mm thick with aluminium zinc alloy coated MAKE: KARTHIK/ JSW

Providing ridges or hips of width 60 cm overall width plain G.A. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.45 mm thick with GA sheet

Providing and fixing using 'H' Frame scaffolding or double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners,connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note:This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes MAKE: ASHIRWAD/ FINOLEX

Providing and fixing white vitreous china laboratory sink with C.I.brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete,including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm MAKE: PARRYWARE/ ORIENT/ CERA

Providing and fixing uplasticised PVC connection pipe with brass unions: 45 cm length 20 mm nominal bore

Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete. Semi rigid pipe 40 mm dia Make: ONIDA

Providing and fixing CP brass angle cock of approved quality and colour. 15mm dia. MAKE: ONIDA

Providing and fixing three way swan neck tap 15 mm MAKE: ONIDA

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering,finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 M sand : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.

Centering and shuttering including strutting, propping etc. and removal of form for: Shelves (Cast in situ)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 M sand : 6 graded stone aggregate 20 mm nominal size).

Making rough of the existing flooring surface by scrapping and using mechanical and means preparing the surface rough for laying flooring tile.

Providing and laying vitrified floor tiles in different sizes (Minimum thickness of 10 mm) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on average thickness varies from 20mm to 40 mm thick cement mortar 1:4 (1 cement : 4 Manufactured sand), jointing with grey cement slurry @3.3kg/ sqm including grouting the joints with white cement and matching pigments etc.,complete. Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 Mnaufactured sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm MAKE: SOMANY/ KAJARIA

Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 M sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of black colour and shade Area of slab over 0.50 sqm

Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work

Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Removing dry or oil bound distemper , water proofing cement paint and like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete including necssary scaffolding:

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre MAKE: asian or its equivalent

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Voatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour including necssary scaffolding: Two coats Recommended brand: asian(Apex)

Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats Recommended Brands [asian - apcolite gloss enamel OR Nerolac – synthetic enamel OR Dulux - Gloss enamel]

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade including necssary scaffolding: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) MAKE: Asian

Providing and fixing aluminium work for doors,windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e., at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) MAKE: JINDAL

Providing and fixing aluminium work for doors,windows,ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e., at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) MAKE: JINDAL

Providing and fixing 32mm OD, 220mm long tubular SS handle Make: OCEAN or its equivalent

Providing and fixing 100mm brass locks of 4 lever (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. MAKE: GODREJ

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With glass panes of 5.00 mm thickness (Pin Headed/ Plain) MAKE: SAINT GOBIAN OR MODI

Providing and fixing 9mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I type II, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P brass/ stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. Pre-laminated particle board with decorative lamination on both sides. MAKE: NOVAPAN

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. MAKE: GODREJ (HEAVY DUTY)

Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Single rubber stopper

Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete: 100x10 mm

Providing and fixing ACP sheet in position (4 mm thick) over the existing aluminium frames including all kinds of nuts, bolts, tools & tackles etc,. MAKE: ALSTONE/ FLEXIBOND

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Providing and fixing tiled False Ceiling of approved materials of size 600x600 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanized @ 170 gsm/sqm) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x32mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T"at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications drawings and as directed by Engineer-in-Charge. 9 mm thick square edge PVC Laminated Gypsum Tile of size 600x600 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. The tiles should have Thermal Conductivity k = 0.24 w/m k, Colour white, Fire performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 x 600 x 9 mm MAKE: ARMGYP DEW DROPS (ARMSTRONG)

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead for all lead upto 10 kms including all lifts involved.

PART-II: ELECTRICAL WORKS

Supply and fixing teak wood box of size 300 mm x 250mm x 40 mm with 3mm thick white hylem sheet for top cover including following accessories and switch board shall be duly pre-wired with PVC insulated FRLS copper conductor cable 4 sq mm size (i) 5 Amps switch piano flush type - 2 Nos. (ii) 5 Amps universal socket outlet 5pin flush type - 2Nos. (iii) 15Amps socket outlet 6pin, flushtype - 2Nos. (iv) 15 Amps switch piano flush type - 2 Nos. (v) Indicator Lamp flush type - 1 No. (vi) 20 Amps, 2 Pole MCB 'C' curve, 240 Volt AC - 1 No. Make: For (i) to (v) LISHA and (vi) ABB / MDS LEGRAND

Supply & fixing of 2 feet x 2 feet 36Watt LED light fitting (day colour lighting) complete with all fittings, suitable for grid / false ceiling complete set including required length and rated 2 core copper wire. Make: Philips / Wipro / Bajaj.

Dismantling & taking down wiring with all fitinngs, fixtures and old existing Main switch board / distribution board after carefully disconnecting the Electric connection and depositing the old materials to E & MM Store yard or to a specified location within standard distance.

Supply,installation,fixing,testing and commissioning of Maintenance Free earthing arrangement using dual pipe with flat technology having at-least 2.5 metre depth trunch, up to 2 metre length, 50mm dia, 40 x 6 x 2000mm copper strip with 25kg chemical earth enhancing compound as per IS:3043-1987.The earth pit chamber should be made of plastic material (Heavy high grade polypropylene) with lockable front cover,Connecting the earth pit to Main DB and Sub Db using 8 SWG bare copper wire of minimum 15 metre length inside a suitable size PVC Pipe. Make: Any Standard ISI (NSR) and approved by CPRI

Group A wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Havells / Finolex / V-Guard. Pipe Make: Modi or any ISI make

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Wire Make: Havells / Finolex / V-Guard. Pipe Make: Modi or any ISI make

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (40mm & 25mm dia) as required. Wire Make: Havells / Finolex / V-Guard. Pipe Make: Modi or any ISI make 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (40mm & 25mm dia) as required. Wire Make: Havells / Finolex / V-Guard. Pipe Make: Modi or any ISI make 4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (40mm & 25mm dia) as required. Wire Make: Havells / Finolex / V-Guard. Pipe Make: Modi 4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (40mm & 25mm dia) as required. Wire Make: Havells / Finolex / V-Guard. Pipe Make: Modi or any ISI make 4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (40mm & 25mm dia) as required. Wire Make: Havells / Finolex / V-Guard. Pipe Make: Modi or any ISI make 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit (40mm & 25mm dia) as required. Wire Make: Havells / Finolex / V-Guard. Pipe Make: Modi or any ISI make 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing metal box of 200 mm (L) X 150 mm (H) X 75 (D) mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required(with required holes for 25mm / 40mm dia the PVC pipe to be used for item no:62 to 67). Any ISI make

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Legrand / Schneider / ABB 15/16 A switch.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Legrand / Schneider / ABB 6 pin 15/16 A socket outlet

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Legrand / Schneider / ABB 5/6 A switch

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make: Legrand / Schneider / ABB 3 pin 5/6 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Make: Legrand / Schneider / ABB

Supplying and fixing 12 Module (200 mmX150 mm), GI box alongwith modular base & cover plate for modular switches in recess etc. as required (to fix Item Nos:69 to 72). Make: Legrand / Schneider / ABB

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Make: Legrand / Schneider / ABB

Installation, testing and commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. (Light fittings will be supplied departmentally)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. (Ceiling Fans will be supplied departmentally)

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Upto 450 mm sweep). (Exhaust Fans will be supplied departmentally)

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. Make: Legrand / Schneider / ABB 100 Amp, 30kA, FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. Make: Legrand / Schneider / ABB 200 Amp, 36 KA,FPMCCB

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. Make: Legrand / Schneider / ABB 250 Amp, 36 KA,FPMCCB

Supplying and fixing 4 way (4 + 12), Double Door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). Make: Legrand / Schneider / ABB

Supplying and fixing of 4 way (4 + 12), Double Door surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A, tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) Make: Legrand / Schneider / ABB

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB Double Pole

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB Triple Pole and Neutral

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB 25 Amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB 40 Amps

Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB 63 Amps

Supplying and fixing 20 amps, 415 volts, TPN industrial type, socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Make: Legrand / Schneider / ABB