Central Food Technological Research Institute Tender

Dismantling CI pipes including all necessary fittings manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge: 110 mm dia

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling aluminium/ Gypsum partitions/ PVC doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.

Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work) as per direction of Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 M sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 M sand: 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Cement concrete flooring 1:2:4 (1 cement : 2 M sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 M sand)

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with : Cement mortar 1:6 (1 cement : 6 M sand)

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.Providing and applying bonding coat for bonding old and fresh concrete includes surface preparation complete. SBR Polymer (@10% of cement weight) modified ementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer Make: NITOBOND SBR - FOSROC

Grading roof with Cement Concrete for water proofing treatment with 50mm to 75mm average thickness includes mixing of water proofing compound Conplast WL of M/s. FOSROC mixed at 150 ml per bag of cement which is been mixed for concrete. The work includes proper mixing of these items correctly, compacting and finishing the same to required slopes etc. in all leads and lifts complete all as required and directed by Engineer-In-Charge. Cement Concrete : 1:2:4

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door 110x110x110 mm MAKE: ASHIRWAD/ FINOLEX

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter MAKE: ASHIRWAD/ FINOLEX

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) P or S trap with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid Make : Cera or Hindware or Parryware

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes MAKE: ASHIRWAD/ FINOLEX

Providing and fixing on wall face PVC moulded fittings/ accessories for SWR rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS:5382 leaving 10 mm gap for thermal expansion. Door Bend/ T Bend/ Plain Bend 90º 110 mm Make: Ashirwad/ FINOLEX

Providing and fixing CP coated brass two way bib cock 15mm dia Make: ONIDA

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing CP Coated Brass Angle cock 15 mm Make: ONIDA

Providing and fixing of ceramic nahani trap 100 mm dia including adhesive complete MAKE: ASHIRWAD/ FINOLEX

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. Make: Sintex/ Maruthi

Providing and fixing factory made PVC door frame made of PVC extruded section of profile size 42X48mm having an overall dimension (tolerance ± 1mm) with wall thickness 2.0mm (± 0.2mm), corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded and 3 nos. staineless steel hinges fixed to the frame for door shutter complete as per manufacturers specification including 24mm thick factory made single/multi panel PVC door shutter reinforced with excellent polymeric reinforcement, shall be water proof, termite proof quality including fixing 2 nos of good quality powder coated aluminium aldrops and 2 nos PVC handles of 150mm length complete as per the manufacturers specification and direction of Engineer-in-charge. (For WC and bath room door shutter) Make : Sintex, Maruthi

Surface preparation of terrace including cleaning with metal wire brush to remove all dust,loose particles, fungus etc., washing with water,grinding any sharp edges etc all complete as per instruction of Engineer In Charge

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 4 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/ 450N/ 5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : Defect Liability Period for this waterproof membrane work will be 5 years 4 mm thick Make: SIKA or TIKIDAN or STP

Providing and applying high performance, water based, cold applied single component, UV resistant, Elastomeric PU liquid membrane for water proofing over APP membrane. One coat of self priming elestomeric PU liquid membrane (dilution with water in the ratio {1:1}) and two coats of undiluted elestomeric PU liquid membrane, complete in all respect as per the direction of Engineer-in-charge. Make: Shali urethane BTD

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Make: SOMANY/ KAJARIA/ NITCO

Precise cutting of tile joints for cleaning existing cementious grout and re-grouting the joints of tiles having joints of 3mm to 4mm width, using epoxy grout mix of organic coated filler of desired shade including filling/ grouting and finishing complete as per direction of Engineer-in-charge. Make: Leticrete, Asian Paints or FOSROCK Size of tile - 300mm x 300mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness including pointing in white cement mixed with pigment of matching shade complete. Size of tile: 200x300 mm or 250x375 mm or 300x450 mm Make: SOMANY/KAJARIA/ORIENT

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. MAKE: TATA/ APPOLLO/ SAIL

Providing and fixing precoated galvanised steel coloured profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. MAKE: JSW/ TATA

Providing and fixing SS wire guage (Grade - 304) fly proof mesh (or mosquito mesh) of thickness 0.5 mm dia to 0.63 mm dia of average width of aperture 1.4 mm or less (as decided by the engineer incharge) in both the directions for MS windows necessary screws, matching beeding and fittings etc.,

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work MAKE: asian - apcolite gloss enamel OR Nerolac – synthetic enamel OR Dulux - Gloss enamel

Electrical Work

Dismantling & taking down wiring with switch boxes, old Electrical panel etc. as directed by Engineer in charge and depositing old materials in E & MM Store yard. (MR Item)

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Same as Item No: 12. (CPWD Electrical- 2022, Ch. 1, Item No:-1.10, Sub Item Nos:-1.10.1, 1.10.3; Pg. No.2) 2.1) Group A

Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Same as Item No: 12. (CPWD Electrical- 2022, Ch. 1, Item No:-1.10, Sub Item Nos:-1.10.1, 1.10.3; Pg. No.2) 2.2) Group C

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick (Depth of 6.5 ft.)including accessories, and providing masonry enclosure (1.5ft x 1.5ft. Brick Muffling and plastering) with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required as per IS-3043, as per direction of E-I-C. (CPWD 2022, Electrical, Item No.5.4, Pg. No. 23).

Supplying of 3.0 Core x 6.0 Sq.mm. size PVC insulated and PVC sheathed / XLPE aluminium armoured conductor cable of 1.1 KV grade as required. UG Cable Make: CCI / Polycab / Havells / Universal / KEI. (MR-Item)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. a) upto 35 sq. mm. (CPWD 2022, Electrical, Item No.7.1.1, Pg. No. 26)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe or fixed to wall using suitable size MS clamps (clamped with MS flat clamp of suitable size) etc. as required in underground / surface including proper saddling etc as required as per direction of E-I-C. Up to 35 sq. mm. (CPWD Electrical - 2022, Ch. 7, Item No:-7.5.1, Pg No.26).

Providing and fixing 6 SWG dia GI wire on surface or in recess for loop earthing as required. (CPWD Electrical - 2022, Ch. 5, Item No:-5.16, Pg No.24).

Providing, laying and fixing of 40.0 mm dia G.I. pipe (medium class) in ground complete with G.I. fittings in existing trench (75 cm deep) and re-filling etc. as required Make: TATA / JINDAL. (MR-Item)

Providing, laying and fixing of 40.0 mm dia G.I. pipe (medium class) in wall by using suitable size MS Flat clamps to complete with G.I. fittings etc. as required Make: TATA / JINDAL. (MR-Item)

Supply, fixing, installing, testing and commissioning of LT Meter box out door type panel made out of 1.6mm thick sheet steel mounted on angle iron frame work of size 40 x 40 x 4mm and 1feet above the groung level, duly painted with 2 coats of synthetic enamle paint over a coat of Red-oxide primer. The panel shall be provided with 8 individual single phase energy meter chamber. Each chamber shall be having sufficient space for accommodating 1No. of LT KWH meters, 32A fuse carrier & one number of 2Pole MCB 32A, provision of suitable size glass window for meter reading. Each chamber shall be provided with hinged cover and locking arrangement. Connecting all incoming and outgoing cables with proper size copper / alluminium lugs and glands includes the following. a) Copper bus-bar of size 25mm x 3mm - 60 Cms long mounted on bus-bar insulators. - 4 Nos., b) Procelene Kit-kat fuse assemby complete set, 32A - 8 Nos., c) 32A, 2Pole, C-curve MCB. - 8 Nos. fixing only old serviceable Energy Meters, including complete wiring of panle with single core multistrand FRLS copper conductor cable 4.0 sq.mm. complete all as specified and directed by engineer-in-charge.Note : Old serviceable Energy Meter dismantled wide item number 1 or new energy meter for free and fixing only and will be issued by the department. (Note : The quoted rate inclusive of necessary demolition of floor / braking wall and necessary excavation of soil to take out and re-alignment of existing incomer / out-going armoured cable complete all as specified and as directed by Engineer incharge. (MR - item)