Central Food Technological Research Institute Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 3,15,050Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_CSIR_153386_1Bid Award Id
ViewTender No
E/CW/001/1000/2023-2024Tender Authority
Central Food Technological Research Institute ViewPurchaser Address
-Website
http://https://www.csir.res.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Detailed NIT with terms and conditions, Annexures, General Conditions of Contract etc
Additional and General information for Electrical Work and list of make for Cement
BOQ Items
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking at CFTRI auction yard within 1 km lead: Of area 3 sq. metres and below
50
-
-
Dismantling rolling shutters complete an stacking at CFTRI auction yard within 1 km lead: of area beyond 3 sq.metres
2
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar
110
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
45
-
-
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead: Of sectional area 40 square centimetres and above
10
-
-
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : Of sectional area below 40 square centimetres
2780
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
750
-
-
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : In cement mortar
28
-
-
Cutting and removing of tree roots of girth upto 30cm after earth work excavation.
40
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
240
-
-
Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil
1750
-
-
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m
100
-
-
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete
100
-
-
Coursed rubble masonry (second sort) with hard stone in foundation & plinth with : Cement mortar 1:6 (1 cement : 6 M sand)
30
-
-
Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor five level. Masonry work (second sort), in cement mortar 1:6 (1 cement: 6 M sand)
25
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.00 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 M sand)
40
-
-
Brick work with common burnt clay modular bricks of class designation 5.00 in exposed brick work including making horizontal and vertical grooves 10mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 M sand). Above plinth level upto floor V level
10
-
-
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 M sand)
1100
-
-
12 mm cement plaster of mix : 1:4 (1 cement: 4 M sand)
500
-
-
6 mm cement plaster of mix : 1:3 (1 cement : 3 M sand)
750
-
-
Extra for addition of synthetic Polyester triangular fibre of length 6 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125 gms. of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. MAKE: RECRON 3S (RELIANCE)
300
-
-
Providing and placing in position 100 mm thick factory made machine batched & machine mixed Precast RCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge
90
-
-
Cement concrete flooring 1:2:4 (1 cement : 2 M sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate
250
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 M sand: 8 graded stone aggregate 40 mm nominal size derived from natural sources)
70
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 M Sand : 3 graded stone aggregate 20 mm nominal size)
15
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 M sand derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
5
-
-
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 M sand derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources).
15
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
(150ml per bag)
MAKE: CONPLAST WL (FOSROC)
25
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
15
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform
25
-
-
Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers
60
-
-
Centering and shuttering including strutting, propping etc. and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts
30
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
MAKE: TATA/ JSW/ SAIL/ VIZAG
200
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.
MAKE: TATA/ JSW/ SAIL/ VIZAG
1000
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
MAKE: TATA/ APL APOLLO/ SAIL/ JSW/ VIZAG
8000
-
-
Providing and fixing precoated galvanised steel coloured profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. MAKE: JSW/ TATA
1000
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)
MAKE: TATA/JSW
70
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. MAKE: TATA/ APL APOLLO/ SAIL/ JSW/ VIZAG
1000
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth)
MAKE: TATA/JSW
240
-
-
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete: Flashings/ Aprons.( Upto 600 mm)
MAKE: TATA/JSW
80
-
-
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
753.5
-
-
Providing and laying Vitrified tiles in floor in different sizes (Minimum thickness of 10 mm) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 M sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Double charge vitrified tile polished finish of size (Tile cost is considered for Rs 80.00/Sq.ft or Rs. 861/- per sqm including GST) Size of Tile 600 x 600 mm
MAKE: SOMANY/ KAJARIA/ RAK/ NITCO
750
-
-
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 M sand), including grouting the joint with white cement & matching pigments etc. complete. (Tile cost is considered for Rs 80.00/Sq.ft or Rs. 861/- per sqm including GST) Size of Tile 600x600 mm
MAKE: SOMANY/ KAJARIA/ RAK/ NITCO
40
-
-
Providing and laying vitrified tiles in floor in different sizes (Minimum thickness of 10 mm) with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, laid on 20mm thick cement mortar 1:4 (1 cement : 4 M sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily. Glazed vitrified tiles Matt/Antiskid finish of size
Size of Tile 600x600 mm
(Tile cost is considered for Rs. 85/- per sq.ft or Rs. 915/- per sqm including GST)
MAKE: SOMANY/ KAJARIA/ RAK/ NITCO
70
-
-
Providing and fixing Vitrified wall tiles of approved make, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 M sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Tile cost is considered for Rs.85/- per sq.ft.or Rs. 915/- per sqm including GST)
MAKE: SOMANY/ KAJARIA/ RAK/ NITCO
150
-
-
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 M sand). Ordinary cement without any pigment
170
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement : 4 M sand) : 25 mm thick
20
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 M sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red
Area of slab over 0.50 sqm
20
-
-
Providing and fixing tiled False Ceiling of approved materials of size 600x600 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanized @ 170 gsm/sqm) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x32mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T"at 600mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x24x0.3mm and laying false ceiling tiles of approved texture in the grid including, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications drawings and as directed by Engineer-in-Charge. 9 mm thick square edge PVC Laminated Gypsum Tile of size 600x600 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
The tiles should have Thermal Conductivity k = 0.24 w/m k, Colour white, Fire performance Class 0/Class1 (BS 476 Part 6&7) in module size of 600 x 600 x 9 mm
MAKE: ARMGYP DEW DROPS (KNAUF-ARMSTRONG)
850
-
-
Providing and fixing 10mm thick toughened glass partition of approved brand and manufacture, including providing and fixing connecting SS patches, required hardwares the joints between glass panels and gaps at the perimeter to be filled with sealant. Providing and fixing 10mm thick frameless toughened glass door shutter, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes, cutouts etc. for fixing required door fittings with SS door handle, H-type 450mm 32mm dia and door lock all complete as per direction of Engineer in charge MAKE: 1. GLASS: SAINT GOBIAN 2. FITTINGS: OZONE/ DORMA
350
-
-
Providing and fixing SS wire guage (Grade - 304) fly proof mesh (or mosquito mesh) of thickness 0.5 mm dia to 0.63 mm dia of average width of aperture 1.4 mm or less (as decided by the engineer incharge) in UPVC window shutters with necessary screws, fittings etc.,
24
-
-
Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered
frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm).
Make: NCL VEKA/ Kommerling/ Rehau
60
-
-
Providing and fixing glazing in UPVC door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge : With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
MAKE: SAINT GOBIAN OR MODI
48
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm
MAKE: SAINT GOBAIN
2
-
-
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
Make: Meena Fibre Glass/ Duroplast/ Polyline/ Cactus
50
-
-
Providing and fixing to existing door frames. 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
Make: Meena fibre Glass/ Duroplast/ Polyline/ Cactus
20
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design
complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
MAKE: CERA/ PARRYWARE/HINDWARE
6
-
-
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and
making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern
MAKE: CERA/PARRYWARE/HINDWARE
3
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
MAKE: CERA/ PARRYWARE/HINDWARE
2
-
-
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : Size 600x450x200 mm
MAKE: CERA/ PARRYWARE/HINDWARE
2
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe
32 mm dia
10
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
20 mm nominal dia Pipes
MAKE: SUPREME/ ASHIRWAD/ ASTRAL
100
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
20 mm nominal dia Pipes
MAKE: SUPREME/ ASHIRWAD/ ASTRAL
100
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore
Make: Zoloto/ Leader/ Sant/ Audco
20
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 20 mm nominal bore
MAKE: WATER TECH
1
-
-
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main: 20 mm nominal bore
20
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length
15 mm nominal bore
18
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. MAKE: SINTEX
1000
-
-
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore
MAKE: Jaquar/ Parryware/ Hindware/ Ess Ess
11
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore
MAKE: Jaquar/ Parryware/ Hindware/ Ess Ess
24
-
-
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
1
-
-
Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. 20 mm nominal bore, weighing not less than 40 gms
MAKE: ASHIRWAD/ SUPREME
1
-
-
Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks
10
-
-
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
100
-
-
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 M sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 M sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 M sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 M sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line :
With common burnt clay F.P.S. (non modular) bricks of class designation 5.00
2
-
-
Extra for depth beyond 45 cm of brick masonry chamber : For 455x610 mm size
With common burnt clay F.P.S. (non modular) bricks of class designation 5.00
1
-
-
Providing and fixing PVC Elbow 63mm
MAKE: SUPREME/ ASTRAL/ ASHIRWAD
8
-
-
Providing and fixing PVC Door Elbow 63mm
MAKE: SUPREME/ ASTRAL/ ASHIRWAD
8
-
-
Providing and fixing PVC Elbow 110mm
MAKE: SUPREME/ ASTRAL/ ASHIRWAD
10
-
-
Providing and fixing PVC Door Elbow 110mm
MAKE: SUPREME/ ASTRAL/ ASHIRWAD
10
-
-
Providing and fixing SS Towel rod
MAKE: Parryware/ Hindware
2
-
-
Providing and fixing SS Tissue paper holder
MAKE: Parryware/ Hindware
2
-
-
Providing and fixing SS shower rose with arm
MAKE: Parryware/ Hindware
2
-
-
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 M sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 M sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 M sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 M sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 5.00
8
-
-
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
550
-
-
Providing, laying and jointing PVC pipes of 6 kgf/ sq.cm pressure capacity including testing of joints etc., complete 63 mm diameter Make: ASHIRWAD/ FINOLEX/ SUPREME
40
-
-
Providing, laying and jointing PVC pipes of 6 kgf/ sq.cm pressure capacity including testing of joints etc., complete 110 mm diameter Make: ASHIRWAD/ FINOLEX/ SUPREME
20
-
-
Providing and fixing Health faucet Make: Parryware/ Hindware
8
-
-
Providing and fixing of SWR nahani trap 100 mm dia including adhesive complete MAKE: SUPREME/ ASTRAL/ ASHIRWAD
8
-
-
Providing and fixing 110 mm SS grating with hole
Make: Viking
10
-
-
Providing and fixing 110 mm SS grating Make: Viking
12
-
-
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
350
-
-
Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/ litre
MAKE: asian/ Nerolac/ Dulux
1573
-
-
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Voatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour: Two coats
MAKE: asian/ NEROLAC/ Dulux
1573
-
-
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work
MAKE: asian - apcolite gloss enamel OR Nerolac – synthetic enamel OR Dulux - Gloss enamel
450
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Make: J K Wall Putty/ Birla wall care
1566
-
-
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
MAKE: asian (Apex Advance)
723
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead for all lead upto 10 kms including all lifts involved.
200
-
-
Part B: Electrical
-
-
-
Supplying, Installation, Testing & Commissioning of 16 module, 2 rows x 8 module type GI box (apprx. size: 232.8 x 147.4 x 61.2mm) along with modular base & cover plate for items as mentioned in Item No: 1 in recess (in brick wall and making good the damage) etc. as required in single line alignment from the ground at a height as advised by the Project In-Charge, Electrical. All the items mentioned in Item No:7 has to be fixed in each modular plate as sets and internal wiring for the switches, sockets etc are to be done with 4.0 sq.mm FRLS wires for Phase, Neutral and Earth. Red/Yellow/Blue colour wire for Phase, Black for Neutral and Green colour for Earth. Wire already considered under Item No: 2.17 to 2.22. Modular Base & Cover Plate Make & Model: Same as Item No: 2.07.
115
-
-
Supplying, Installation, Testing & Commissioning of 2 Modular 32 A polycarbonate one-way DP Switch with indicator to work with 230 V AC and to be fixed in the existing modular swithboard. The output control wires from the DP switch are to be done with 4.0 sq.mm FRLS copper wires for both Phase & Neutral. Red/Yellow/Blue color wire for Phase and Black for Neutral. Wire already considered under Item No: 2.17 to 2.22. Modular DP Make: Same as Item No: 2.07 (In case of unavailability in the market, any standard make with ISI mark to fix).
115
-
-
Supplying, Installation, Testing & Commissioning of 2 feet x 2 feet 36 Watt LED light fitting (day colour lighting) complete with all fittings, suitable for grid / false ceiling complete set including required length of internal wiring with rated 2 core copper wire to work with 240V Single Phase, 50Hz AC Supply. Make: Philips / Wipro / Havells / Bajaj.
198
-
-
Dismantling & taking down wiring with all fittings, fixtures and old existing Main switch board / distribution board after carefully disconnecting the incoming electrical input for the said room and depositing all the old materials in an organised manner to Auction / E & MM Store Yard or as advised by the Electrical Officer In-Charge of the Project.
1
-
-
Shifting of existing Electrical Panel upto a distance of 5 Metres from the existing place and taking care of Disconnection and Re-Installation, Reconnection, Testing & Commissioning of the existing UG Cables as required in the presence of In-Charge Electrical Engineer.
1
-
-
Supplying, Installation, Testing & Commissioning including crimping and terminating RJ45 Female Ethernet Connector in the exisitng 1 or 2 Modular Box as required.Make: D-Link / ABB / Legrand
40
-
-
Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Make for 2.07a) to 2.07d): Legrand / Schneider / Crabtree / Leon / Indo-Asian / GM a) 5/6 A switch - 2 Nos b) 3 pin 5/6 A socket outlet - 2 Nos c) 15/16 A switch - 2 Nos d) 6 pin 15/16 A socket outlet - 2 Nos.
115
-
-
Earthing with copper earth plate 600 mm x 600 mm x 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal / coke and salt as required. Note: Masonry enclosure size is 1.5 Feet x 1.5 Feet x 1.5 Feet. As per IS 3043, charcoal/ coke and salt should be refilled with 50 Kg each per earthpit. The copper plate has to be tinned, connected copper flats have to be brazed and only SS nut, bolts and washers to be used.
18
-
-
Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I.pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.
30
-
-
Providing and laying earth connection from earth electrode with 4.00mm dia copper wire in 15mm G.I. pipefrom earth electrode including connection with copper thimble excavation and refilling as required.
160
-
-
Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
105
-
-
Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required.
3
-
-
Supplying and fixing of 25 mm size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. PVC Conduit make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's.
310
-
-
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Same as Item No: 2.07. a) Group A
98
-
-
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Same as Item No: 2.07. a) Group B
18
-
-
Wiring for light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc., as required. Wire Make: Havels / Finolex / Standard / V-Guard; PVC Conduit Make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's; Modular switch, plate etc., Make & Model: Same as Item No: 2.07. a) Group C
12
-
-
Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Wire Make : Havels / Finolex / Standard / V-Guard. PVC Conduit make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's. a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire
94.5
-
-
Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Wire Make : Havels / Finolex / Standard / V-Guard. PVC Conduit make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's. b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
238.5
-
-
Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Wire Make : Havels / Finolex / Standard / V-Guard. PVC Conduit make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's. c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
81.5
-
-
Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Wire Make: Havels / Finolex / Standard / V-Guard. PVC Conduit make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's. d) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire
61
-
-
Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Wire Make for : Havels / Finolex / Standard / V-Guard. PVC Conduit make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's. e) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
82
-
-
Wring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Wire Make : Havels / Finolex / Standard / V-Guard. PVC Conduit make: VIP / Joegeetha / Supreme / Astral / Polycab / Modi's. f) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire
30
-
-
Providing and fixing plain 16/0.20mm (0.50 sq.mm) twin flat flexible, FRLS PVC insulated, copper conductor cable, in PVC sleeve of suitable size on the floor / wall, or side of the table / door etc. as required. Wire Make: Havels / Finolex / Standard / V-Guard
140
-
-
Supplying and fixing metal box of 100 mm (L) X 100 mm (H) X 60 (D) mm deep sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required.
40
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. Make & Model for Modular Plate & Cover: Same as Item No: 2.07
40
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make: Legrand / Schneider / ABB / L&T a) 25 Amps
35
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make: Legrand / Schneider / ABB / L&T b) 40 Amps
20
-
-
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make: Legrand / Schneider / ABB / L&T c) 63 Amps
8
-
-
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.26 a) 63 Amps
14
-
-
Supplying & fixing DP sheet steel enclosure on surface / recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc., as required. Make: Same as Item No: 2.26
18
-
-
Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A, “C” curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. Make: Same as Item No: 2.26
4
-
-
Supplying and fixing 4 way (4 + 12), Double Door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB/Isolator). Make:Same as Item No: 2.26
14
-
-
Supplying and drawing 4 pair of 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel / PVC conduit as required. Telephone Cable Make: Any ISI Brand
120
-
-
Supplying and fixing modular Telephone socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc., as required. Make & Model: Same as Item No: 2.07
20
-
-
Supplying and fixing 1 or 2 Module (75mm x 75mm) GI box alongwith modular base & cover plate for modular switches in recess etc., as required. Make & Model: Same as Item No: 2.07
50
-
-
Supplying and drawing 1 run of UTP 4 pair CAT 6 LAN Cable in the existing surface / recessed steel / PVC conduit as required. LAN Cable Make: D-Link / Havells / Any ISI Brand
140
-
-
Supplying, Installation, Testing & Commissioning of main control and indicating panel made out of 16 SWG MS Sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. a) 6 Zone Panel for Fire Alarm System b) 100 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required - 2 Nos (one to act as standby) c) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC suppply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 nos. talk back unit - 1 Set d) Announcement control desk suitable for different zones selectively and ON ALL CALL switch with visual indication etc., complete as required - 1 set. e) Amplifier change over switch for inter changing amplifier - 1 No. f) Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc., complete as required - 1 No g) Gooseneck microphone with stand and ON/OFF switch - 1 No h) Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters termincal blocks etc. complete as required - 1 Set i) Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 Volt, 30 AH each selaed maintenance free batteries - 1 set. Make: Bosch / Ravel / Siemens / Honeywell
2
-
-
Supplying, Installation, Teting & Commissioning of Smoke Detector with builin LED and mounting base complete with all connections etc., as required. Make & Model: Same as Item No: 2.37
55
-
-
Supplying, Installation, Teting & Commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete glass and push button etc., as required. Make & Model: Same as Item No: 2.37
20
-
-
Supplying, Installation, Teting & Commissioning fire alarm sounder with facility to make announcement, mounted in M.S box (16 SWG) hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc complete as required. Make & Model: Same as Item No: 2.37
20
-
-
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. Cable Make: Any ISI
1200
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements