Cauvery Neeravari Nigam Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 12,60,000Document Cost
Refer DocumentsTender Fee
₹ 5,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
CNNL/2024-25/BD/WORK_INDENT2226Tender No
CNNL/2024-25/BD/WORK_INDENT2226Tender Authority
Cauvery Neeravari Nigam Limited ViewPurchaser Address
-Website
http://http://knnlindia.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
CNN004 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m as directed by the engineer incharge
994.8
276
275161.68
CNN005 - Construction of Embankment by excavating the available approved Gravelor Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading, grading to required slope and compacting to meet the requirement complete as per specifications, including cost of labour,rolling,water,all materials,usageand all other appurtenaces require to complete the work as directed by the engineer incharge
663.2
493
326957.6
CNN006 - 4.1 Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation,top surface of the plinth filling, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surrounding of pipes and conduits with Chlorpyriphos 20percentage E.C. or Lindane 20percentage E.C. - 3.19 lor m2 including cost of chemical, diluting in water to one percent concentration, labour, usage charges of machinery, complete as per specifications and as directed by the engineer incharge
1779
122
218283.3
CNN007 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1-3-6 (M10) Using 20 mm nominal size graded crushed coarse aggregates as directed by the engineer incharge.
319.6
6465
2066437.72
CNN008 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1-2-4 Using 20 mm nominal size graded crushed coarse aggregates as directed by the engineer incharge.
57.6
6492
373979.52
CNN009 - Providing Size Stone masonry with hard stone in foundation and plinth with Cement mortar 1-6 (1 cement - 6 coarse sand) as directed by the engineer incharge
259.1
6644
1721615.86
CNN010 - Providing and laying in position Reinforced cement concrete for all Foundation works. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per \ technical specifications. (The cost of steel reinforcement and formwork to be paid separately) M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates - Footings as directed by the engineer incharge
227.1
6538
1484893.35
CNN011 - Providing and laying in position Cement Concrete for all Sub structures of building, Plinth Beam and as directed by the engineer incharge
153.7
6589
1012790.78
CNN012 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications and as directed by the engineer incharge
326.6
7116
2324320.752
CNN013 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, lapingor welding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings and as directed by the engineer incharge
89.8
93035
8354569.94
CNN014 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications and as directed by the engineer incharge- Footing and raft
227.07
523
118775.7756
CNN015 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications and as directed by the engineer incharge- Plinth beam
153.66
3294
506266.6752
CNN016 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications and as directed by the engineer incharge- column and pier
54.14
4981
269709.238
CNN017 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications and as directed by the engineer incharge-Beam
73.38
4270
313334.8014
CNN018 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications and as directed by the engineer incharge-Roof and Stair case
193.44
3558
688329.1584
CNN019 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgor m3 and minimum compressive strength of 4.00 Nor mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1-4 as per IS 2572-2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications and as directed by the engineer incharge.
925.3
1362
1260628.72
CNN020 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kgor m3 and minimum compressive strength of 4.00 Nor mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1-4 as per IS 2572-2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications and as directed by the engineer incharge.
204.5
1148
234806.9
CNN021 - Providing 12 mm cement plaster with Cement mortar 1-3 (1cement- 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - Ceiling Plastering and as directed by the engineer incharge.
1261
335
423569.9
CNN022 - Providing 15 mm cement plaster with cement mortar 1-3 (1 cement- 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - Internal Plastering and as directed by the engineer incharge.
1690.5
380
643404.3
CNN023 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1-3 (1 cement- 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - Rough Plastering and as directed by the engineer incharge
460.3
380
175190.18
CNN024 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1-5 (1 cement - 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1-6 (1 cement - 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - External Plastering and as directed by the engineer incharge.
893
382
341215.3
CNN025 - Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge- 20 mm to 25 mm wide to required depth - Plastering with grooves and as directed by the engineer incharge.
57.6
68
3951.36
CNN026 - Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge- 20 mm to 25 mm wide to required depth - Cornice Plastering and as directed by the engineer incharge.
273.2
300
81960
CNN027 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including primingcoat with approved steel primer all complete. Fixed to openings or wooden frames with rawl plugs screws etc and as directed by the engineer incharge.
2167.8
190
412532.34
CNN028 - Providing and fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardware and single point locking system with touch lock. Wall thickness of frame and sash shall be of 2-2.5 mm. Maximum possible size - 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor T and Ps shall not be made) and as directed by the engineer in charge
99.2
5605
556075.52
CNN029 - Providing and fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm. Maximum possible size - 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor T and Ps shall not be made) and as directed by the engineer in charge
4.1
5947
24385.98
CNN030 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications and as directed by the engineer incharge.
2
143597
287194
CNN031 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1-3-6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications and as directed by the engineer incharge
26
1056
27471.6
CNN032 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side commercial and as directed by the engineer incharge.
51.3
3454
177236.37
CNN033 - Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mmlong brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65or 80mm size complete as per manufacturers specification and direction of Engineer-in-charge.
79.8
330
26389.86
CNN034 - Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top and bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet and 30x50mm wide to form stiles and 5mm thick and 75mm wide Prelaminated PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles and rails with PVC Designer beading on either side and joined together with solvent cement adhesive etc., Complete as per manufacturers specification and direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges and as directed by the engineer incharge.
22.1
2460
54379.26
CNN035 - Providing White washing with lime to give an even shade -New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin-charge.
2951.4
27
79687.8
CNN036 - Extra for providing and mixing water proofing material in cement plasterwork in proportion recommended by the manufacturers including cost ofmaterial etc as per specifications and as per directions of the Engineerin-Charge.
446.5
66
29736.9
CNN037 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
2951.4
104
306945.6
CNN038 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications- Two coats applied on walls - 1.25 ltror 10 m² over and including one coat of Special primer applied - 0.75 ltr or 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
2951.4
164
484915.02
CNN039 - Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two coat applied - 1.67 ltror 10 m² over and including priming coat of exterior primer applied - 2.20 kgor 10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
840.2
226
190053.24
CNN040 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade -Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
353.2
217
76679.72
CNN041 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, ior c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts and as directed by the engineer incharge.
332.1
587
195141.96
CNN042 - Grab Rail as directed by the engineer incharge.
32
2000
64000
CNN043 - Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment and as directed by the engineer incharge.
967.7
423
409627.41
CNN044 - Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface - 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item).(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face - 2, having properties as visible Light transmittance (VLT) of 25 to 35 percentage , Light reflection internal 10 to 15percentage , light reflection external 10 to 20 percentage , shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 Wor m2 K etc.The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement and as directed by the engineer incharge.
46.1
2059
94929.12
CNN045 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS- 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1-4 (1 cement - 4 coarse sand), jointing with grey cement slurry - 3.3 kgor m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm and as directed by the engineer incharge.
724.6
1190
862853.68
CNN046 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS - 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1-4 (1 Cement - 4 Coarse sand), jointing with grey cement slurry - 3.3 kgor m2 including pointing the joints with white cement and matching pigments etc., complete and as directed by the engineer incharge.
65.9
924
60931.14
CNN047 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1-3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications and as directed by the engineer incharge.
524
1507
789668
CNN048 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1-6, 20 mm thick, and joints finished with cement mortar 1-3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications and as directed by the engineer incharge.
551.6
5541
3056470.76
CNN049 - Cornice Painting as directed by the engineer incharge.
22.4
125
2800
CNN050 - FRP - Columns. 3.75 m , Capital - pedestal and as directed by the engineer incharge.
6
75000
450000
CNN051 - Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1-3 (1 cement - 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete and as directed by the engineer incharge.
162.7
3493
568376.18
CNN052 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-Columns as directed by the engineer incharge.
38.4
7187
276015.36
CNN053 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-Roof beam as directed by the engineer incharge.
68
7187
488777.2
CNN054 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-Roof Slab as directed by the engineer incharge.
199.1
7187
1431110.89
CNN055 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-Staircase as directed by the engineer incharge.
11.3
7187
81223.27
CNN056 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications-Chejja as directed by the engineer incharge.
5.7
7187
40971.03
CNN057 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, lapingor welding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings-Columns, Roof Beams, Roof Slab, Staircase, Chejja loft as directed by the engineer incharge.
46.4
93965
4360003.84
CNN058 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as directed by the engineer incharge - Columns and Piers - 70percentage as directed by the engineer incharge.
38.4
5081
195141.12
CNN059 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as directed by the engineer incharge - Beams - 60percentage as directed by the engineer incharge.
68
4355
296201.2
CNN060 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as directed by the engineer incharge - Roof (Straight and Arched) 50percentage incl staircase as directed by the engineer incharge.
210.4
3629
763730.96
CNN061 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as directed by the engineer incharge - Chejjas, Canopy and Other Architectural projections of minor sections -45percentage as directed by the engineer incharge.
5.7
3266
18621.33
CNN062 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgor m3 and minimum compressive strength of 4.00 Nor mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1-4 as per IS 2572-2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications.
958.2
1376
1318483.2
CNN063 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kgor m3 and minimum compressive strength of 4.00 Nor mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1-4 as per IS 2572-2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications as per directions of Engineer-in-charge.
187.9
1159
217888.84
CNN064 - Providing 12 mm cement plaster with Cement mortar 1-3 (1cement- 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Ceiling Plastering.
1279.5
339
434134.35
CNN065 - Providing 15 mm cement plaster with cement mortar 1-3 (1 cement- 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete-Internal Plastering as per specifications and as per directions of Engineer-in-charge.
1786.1
384
686576.84
CNN066 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1-3 (1 cement- 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete - Rough Plastering as per specifications and as per directions of Engineer-in-charge.
497.7
384
191315.88
CNN067 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1-5 (1 cement - 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1-6 (1 cement - 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete - External Plastering.as per specifications and as per directions of Engineer-in-charge.
1200.8
389
467951.76
CNN068 - Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge- 20 mm to 25 mm wide to required depth Plastering with grooves and as per directions of Engineer-in-charge.
66.2
69
4587.66
CNN069 - Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge- 20 mm to 25 mm wide to required depth Cornice Plastering and as per directions of Engineer-in-charge.
250.8
300
75240
CNN070 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including primingcoat with approved steel primer all complete. Fixed to openings or wooden frames with rawl plugs screws etc. as per directions of Engineer-in-charge.
2096
192
402851.2
CNN071 - Providing and fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardwareand single point locking system with touch lock. Wall thickness offrame and sash shall be of 2-2.5 mm. Maximum possible size - 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor TandPs shall not be made) as per directions of Engineer-in-charge.
95.8
5661
542390.86
CNN072 - Providing and fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on theframe along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm x 1000mm.(The cost is inclusive of all fixtures and separate charges for minor TandPs shall not be made) as per directions of Engineer-in-charge.
4.1
6007
24629.52
CNN073 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications as per directions of Engineer-in-charge. .
2.1
145032
304569.09
CNN074 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1-3-6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications as per directions of Engineer-in-charge.
25
1067
26680
CNN075 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side commercial as per directions of Engineer-in-charge. .
54.9
3489
191568.06
CNN076 - Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mmlong brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65or 80mm size complete as per manufacturers specification and direction of Engineer-in-charge as per directions of Engineer-in-charge. .
68.4
334
22845.6
CNN077 - Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top and bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet and 30x50mm wide to form stiles and 5mm thick and 75mm wide Prelaminated PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles and rails with PVC Designer beading on either side and joined together with solvent cement adhesive etc., Complete as per manufacturers specification and direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges as per directions of Engineer-in-charge. .
18.9
2485
46970.28
CNN078 - Providing White washing with lime to give an even shade -New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin-charge .
3065.6
27
83690.88
CNN079 - Extra for providing and mixing water proofing material in cement plasterwork in proportion recommended by the manufacturers including cost ofmaterial etc as per specifications and as per directions of the Engineerin-Charge.
600.4
67
40346.88
CNN080 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
3065.6
105
321888
CNN081 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications- Two coats applied on walls - 1.25 ltror 10 m² over and including one coat of Special primer applied - 0.75 ltr or 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
3065.6
166
508889.6
CNN082 - Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two coat applied - 1.67 ltror 10 m² over and including priming coat of exterior primer applied - 2.20 kgor 10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
1117.7
228
255394.45
CNN083 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade -Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
347.2
219
76140.96
CNN084 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, ior c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts.
332.1
593
197101.35
CNN085 - Grab Rail as per directions of Engineer-in-charge. .
104
2000
208000
CNN086 - Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment as per directions of Engineer-in-charge. .
1111.3
427
475080.75
CNN087 - Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, having properties as visible Light transmittance (VLT) of 25 to 35 percentage, Light reflection internal 10 to 15percentage , light reflection external 10 to 20 percentage, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 Wor m2 K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement as per directions of Engineer-in-charge.
52.9
2079
110021.42
CNN088 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS- 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1-4 (1 cement - 4 coarse sand), jointing with grey cement slurry - 3.3 kgor m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm as per directions of Engineer-in-charge. .
860.2
1202
1034562.54
CNN089 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS - 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1-4 (1 Cement - 4 Coarse sand), jointing with grey cement slurry - 3.3 kgor m2 including pointing the joints with white cement and matching pigments etc., complete as per directions of Engineer-in-charge. .
65.9
933
61537.42
CNN090 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1-3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications as per directions of Engineer-in-charge. .
537.1
1522
817466.2
CNN091 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1-6, 20 mm thick, and joints finished with cement mortar 1-3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications as per directions of Engineer-in-charge. .
281.1
5596
1573176.15
CNN092 - Cornice Painting as per directions of Engineer-in-charge. .
250.8
125
31350
CNN093 - FRP - Columns. 3.75 m , Capital - pedestal as per directions of Engineer-in-charge. .
2
125000
250000
CNN094 - Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1-3 (1 cement - 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete as per directions of Engineer-in-charge.
15.5
3528
54688.65
CNN095 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications as per directions of Engineer-in-charge for Columns
38.4
7259
278749.44
CNN096 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications as per directions of Engineer-in-charge for Roof beam
64.3
7259
466760.13
CNN097 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications as per directions of Engineer-in-charge forRoof Slab.
179
7259
1299378.9
CNN098 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications as per directions of Engineer-in-charge for Staircase.
11.3
7259
82027.83
CNN099 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications as per directions of Engineer-in-charge for Chejja.
5.7
7259
41376.87
CNN100 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, lapingor welding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings -Columns, Roof Beams, Roof Slab, Staircase, Chejja - loft as directed by the engineer incharge
43.3
94896
4108996.8
CNN101 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as directed by the engineer incharge-Columns and Piers - 70percentage .
38.4
5183
199027.2
CNN102 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as directed by the engineer incharge-Beams - 60percentage .
64.3
4442
285652.75
CNN103 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as directed by the engineer incharge-Roof (Straight and Arched) 50percentage incl staircase.
190.3
3702
704509.63
CNN104 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as directed by the engineer incharge-Chejjas, Canopy and Other Architectural projections of minor sections -45percentage .
5.7
3331
18991.83
CNN105 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgor m3 and minimum compressive strength of 4.00 Nor mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1-4 as per IS 2572-2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications as directed by the engineer incharge.
988.7
1389
1373897.52
CNN106 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kgor m3 and minimum compressive strength of 4.00 Nor mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1-4 as per IS 2572-2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications as directed by the engineer incharge.
195.4
1171
228832.94
CNN107 - Providing 12 mm cement plaster with Cement mortar 1-3 (1cement- 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Ceiling Plastering as directed by the engineer incharge.
1278.9
342
438151.14
CNN108 - Providing 15 mm cement plaster with cement mortar 1-3 (1 cement- 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Internal Plastering as directed by the engineer incharge.
1850.6
388
718587.98
CNN109 - Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1-3 (1 cement- 3 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Rough Plastering as directed by the engineer incharge.
508
388
197256.4
CNN110 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1-5 (1 cement - 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1-6 (1 cement - 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge External Plastering as directed by the engineer incharge.
986.2
393
388168.32
CNN111 - Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and as direction of the Engineer-in-charge- 20 mm to 25 mm wide to required depth-Plastering with grooves.
66.2
70
4634
CNN112 - Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and as direction of the Engineer-in-charge- 20 mm to 25 mm wide to required depth-Plastering with grooves Cornice Plastering.
185.6
300
55680
CNN113 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including primingcoat with approved steel primer all complete. Fixed to openings or wooden frames with rawl plugs screws etc. as direction of the Engineer-in-charge
2096
194
406833.6
CNN114 - Providing and fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardwareand single point locking system with touch lock. Wall thickness offrame and sash shall be of 2-2.5 mm. Maximum possible size - 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor TandPs shall not be made) - as direction of the Engineer-in-charge
95.8
5717
547755.66
CNN115 - Providing and fixing of louvered ventilator made out of multi chambered UPVC (Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on theframe along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor TandPs shall not be made) as direction of the Engineer-in-charge
4.1
6066
24873.47
CNN116 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications as direction of the Engineer-in-charge .
2.3
146468
336878.47
CNN117 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1-3-6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. as direction of the Engineer-in-charge
27
1077
29100.6
CNN118 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side commercial as direction of the Engineer-in-charge.
58.5
3524
206154
CNN119 - Providing and fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners and jointed 2 No.s of 150mmlong brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65or 80mm size complete as per manufacturers specification and direction of Engineer-in-charge.
74.1
337
24993.93
CNN120 - Providing and fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and15x15mm for top and bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet and 30x50mm wide to form stiles and 5mm thick and 75mm wide Prelaminated PVC Sheets for top rail, lock rail and bottom rail on either side and 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail and bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles and rails with PVC Designer beading on either side and joined together with solvent cement adhesive etc., Complete as per manufacturers specification and direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges.
20.5
2509
51452.95
CNN121 - Providing White washing with lime to give an even shade -New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin-charge.
3129.5
27
86374.2
CNN122 - Extra for providing and mixing water proofing material in cement plasterwork in proportion recommended by the manufacturers including cost ofmaterial etc as per specifications and as per directions of the Engineerin-Charge.
493.1
67
33481.49
CNN123 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
3129.5
106
332039.95
CNN124 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications- Two coats applied on walls - 1.25 ltror 10 m² over and including one coat of Special primer applied - 0.75 ltr or 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
3129.5
167
524504.2
CNN125 - Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two coat applied - 1.67 ltror 10 m² over and including priming coat of exterior primer applied - 2.20 kgor 10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
905
230
208783.5
CNN126 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade -Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
357.6
221
79172.64
CNN127 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, ior c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts as direction of the Engineer-in-charge.
332.1
599
199060.74
CNN128 - Grab Rail as direction of the Engineer-in-charge.
104
2000
208000
CNN129 - Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved drawings of Chief Architect, GoK.The aluminium quality shall be as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account).The weight of aluminium extruded section shall be taken for purpose of payment.
922.3
431
398156.91
CNN130 - Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in m2. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item).(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face 2, having properties as visible Light transmittance (VLT) of 25 to 35 percentage , Light reflection internal 10 to 15percentage , light reflection external 10 to 20 percentage , shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 Wor m2 K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement..
43.9
2100
92207.56
CNN131 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS- 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1-4 (1 cement - 4 coarse sand), jointing with grey cement slurry - 3.3 kgor m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm as direction of the Engineer-in-charge.
857.5
1214
1041519.5
CNN132 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS - 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1-4 (1 Cement - 4 Coarse sand), jointing with grey cement slurry - 3.3 kg or m2 including pointing the joints with white cement and matching pigments etc., complete as direction of the Engineer-in-charge.
64.9
943
61207.19
CNN133 - Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1-3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications as direction of the Engineer-in-charge.
507.9
1537
780693.09
CNN134 - Providing and laying flooring and steps fine machine polished granite stone slabs 20 mm thick on cement mortar bed 1-6, 20 mm thick, and joints finished with cement mortar 1-3 over existing cement concrete bed , including cost of materials, mortar, labour, curing complete as per specifications as direction of the Engineer-in-charge.
282.1
5651
1594400.99
CNN135 - Cornice Painting as direction of the Engineer-in-charge.
185.6
125
23200
CNN136 - Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1-3 (1 cement - 3 coarse sand) proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete as direction of the Engineer-in-charge.
15.5
3563
55229.6
CNN137 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications complete as direction of the Engineer-in-charge- Columns
13.8
7330
101156.76
CNN138 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications complete as direction of the Engineer-in-charge- Roof beam
2.4
7330
17592.48
CNN139 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height. The graniteor trapor basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications complete as direction of the Engineer-in-charge- Roof Slab.
18.5
7330
135608.7
CNN140 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, lapingor welding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification Buildings - as direction of the Engineer-in-charge -for Columns, Roof Beams, Roof Slab..
5.4
95826
517462.02
CNN141 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as direction of the Engineer-in-charge - Columns and Piers - 70percentage .
13.8
5285
72934.38
CNN142 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as direction of the Engineer-in-charge - Beams - 60percentage .
2.4
4530
10872.24
CNN143 - Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, post and struts, square or rectangularor polygon in plan including cost of all materials, labour complete as per specifications as direction of the Engineer-in-charge - Roof (Straight and Arched) 50percentage incl staircase..
18.5
3775
69839.35
CNN144 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgor m3 and minimum compressive strength of 4.00 Nor mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1-4 as per IS 2572-2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications as direction of the Engineer-in-charge.
317.8
1403
445968.74
CNN145 - Providing 12 mm cement plaster with Cement mortar 1-3 (1cement- 3 coarse sand) finished with a floating coat of neat cement to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge for Ceiling Plastering..
54
346
18684
CNN146 - Providing 15 mm cement plaster with cement mortar 1-3 (1 cement- 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge Internal Plastering. .
149.3
392
58540.53
CNN147 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1-5 (1 cement - 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1-6 (1 cement - 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - External Plastering.
817.7
397
324953.98
CNN148 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1-5 (1 cement - 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1-6 (1 cement - 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge - Cornice Plastering.
350
371
129850
CNN149 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including primingcoat with approved steel primer all complete. Fixed to openings or wooden frames with rawl plugs screws etc. as per directions of Engineer-in-charge
143.6
196
28145.6
CNN150 - Providing and fixing of 2-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2 (Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having a overall size of 60mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm X 58mm with GI reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24mm. Windows shall be provided with 5mm plain float glass, standard hardwareand single point locking system with touch lock. Wall thickness offrame and sash shall be of 2-2.5 mm. Maximum possible size - 1819mm x 1819mm (The cost is inclusive of all fixtures and separate charges for minor TandPs shall not be made) as per directions of Engineer-in-charge
6.8
5773
39261.84
CNN151 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications as per directions of Engineer-in-charge.
0.3
147904
44371.47
CNN152 - Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1-3-6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debris with lead upto 50 m. including cost of materials, labour charges, complete as per specifications. as per directions of Engineer-in-charge
2
1088
2176.6
CNN153 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. 35 mm thick both side commercial as per directions of Engineer-in-charge.
7.2
3558
25621.2
CNN154 - Providing White washing with lime to give an even shade -New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineerin-charge.
203.3
27
5672.07
CNN155 - Extra for providing and mixing water proofing material in cement plasterwork in proportion recommended by the manufacturers including cost ofmaterial etc as per specifications and as per directions of the Engineerin-Charge.
408.9
68
28050.54
CNN156 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.
203.3
107
21773.43
CNN157 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications- Two coats applied on walls - 1.25 ltror 10 m² over and including one coat of Special primer applied - 0.75 ltr or 10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
203.3
169
34398.36
CNN158 - Finishing walls with Acrylic Smooth exterior paint of required shade -New work (Two coat applied - 1.67 ltror 10 m² over and including priming coat of exterior primer applied - 2.20 kgor 10 m²) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
817.7
233
190524.1
CNN159 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade -Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
28.1
223
6283.16
CNN160 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS- 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1-4 (1 cement - 4 coarse sand), jointing with grey cement slurry - 3.3 kgor m2 including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm as per directions of Engineer-in-charge.
350
1226
429275
CNN161 - Cornice Painting as per directions of Engineer-in-charge .
350
125
43750
CNN162 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terraceor Chajjasor Sunken portion of WC-Bathroom, cold applied PU waterproofing membrane that is highly elastic with elongation greater than 400percentage and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats - 1.6kg per m2 to achieve final DFT (dry film thickness) of 1mm including prime coat of epoxy primer -150 g per m2 and protection with 120gsm Geo-textile over the waterproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification and with a 10 years warranty on product and work from certified manufacturers as per the direction of the Engineer In charge.
1232
875
1078246.4
CNN163 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and Wiring adopting loop system in existing pvc conduiteor casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper wire confirming to the GTP without switch shall be fixed on existing plastic sheetor Gang box, the other end of the wires shall be terminated with sufficient loose length in a wood or pvc round block complete for each outlet-Short point upto 3Mts from tapping point to out let via switch box .
160
285
45600
CNN164 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and Wiring adopting loop system in existing pvc conduiteor casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper wire confirming to the GTP without switch shall be fixed on existing plastic sheetor Gang box, the other end of the wires shall be terminated with sufficient loose length in a wood or pvc round block complete for each outlet-Medium point above 3M and upto 6M from tapping point to out let via switch box .
350
394
137900
CNN165 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and Wiring adopting loop system in existing pvc conduiteor casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper wire confirming to the GTP without switch shall be fixed on existing plastic sheetor Gang box, the other end of the wires shall be terminated with sufficient loose length in a wood or pvc round block complete for each outlet-Long point above 6M and upto 10M from tapping point to out let via switch box.
160
570
91200
CNN166 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and Wiring adopting loop system in existing pvc conduiteor casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper wire confirming to the GTP without switch shall be fixed on existing plastic sheetor Gang box, the other end of the wires shall be terminated with sufficient loose length in a wood or pvc round block complete for each outlet-Two outlet in a row, above 3 mtr upto 6mtr from tapping point to outlet via switch box.
50
708
35400
CNN167 - POINT WIRING USING COPPER WIRE WITHOUT SWITCH Supplying and Wiring adopting loop system in existing pvc conduiteor casting caping using copper Pvc insulated multi stand 2x1.5Sqmm copper wire confirming to the GTP without switch shall be fixed on existing plastic sheetor Gang box, the other end of the wires shall be terminated with sufficient loose length in a wood or pvc round block complete for each outlet-Three outlet in a row, above 3 mtr upto 6mtr from tapping point to outlet via switch box.
80
1035
82800
CNN168 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring. (group A materials). With specified IS-694-1990 - 1.0sqmm
5750
19
109250
CNN169 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-694-1990 - 1.5 Sqmm
9000
26
234000
CNN170 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-694-1990 -2.5 Sqmm
6200
42
260400
CNN171 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-694-1990 -4 Sqmm
1500
63
94500
CNN172 - Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade, multtis and copper conductor single core cable in consealed system of wiring.(group A materials). With specified IS-694-1990 -6 Sqmm
400
92
36800
CNN173 - Supplying 6A flushor projected type socket and a 6 amps flushor projected type SP switch either surfaceor flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. AS per IS 1293 and IS 3654 ( modular switch and socket)-6Amps 3or 5 way
270
147
39690
CNN174 - Supplying and fixing of modular switchor socketor stepped electonic fan regulatoror dimmeror telephone socket etc on existing modular switch plate..(AS per IS 3854 and IS 1293) -6A one Way switch
260
102
26520
CNN175 - Supplying and fixing of modular switchor socketor stepped electonic fan regulatoror dimmeror telephone socket etc on existing modular switch plate..(AS per IS 3854 and IS 1293) -6A Two Way switch
10
166
1660
CNN176 - Supplying and fixing of modular switchor socketor stepped electonic fan regulatoror dimmeror telephone socket etc on existing modular switch plate..(AS per IS 3854 and IS 1293) -Stepped Fan Regulator
160
357
57120
CNN177 - Supplying and fixing of modular switchor socketor stepped electonic fan regulatoror dimmeror telephone socket etc on existing modular switch plate..(AS per IS 3854 and IS 1293) -16A one Way switch
50
180
9000
CNN178 - Supplying and fixing of modular switchor socketor stepped electonic fan regulatoror dimmeror telephone socket etc on existing modular switch plate..(AS per IS 3854 and IS 1293) -6or 16A Universal socket
45
236
10620
CNN179 - Supplying and fixing of modular switchor socketor stepped electonic fan regulatoror dimmeror telephone socket etc on existing modular switch plate..(AS per IS 3854 and IS 1293) -16A combined switch and socket
5
218
1090
CNN180 - Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricksor stoneor c.c wall - 1-3Way.
60
159
9540
CNN181 - Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricksor stoneor c.c wall - 4-5Way.
90
177
15930
CNN182 - Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricksor stoneor c.c wall - 6 Way.
60
220
13200
CNN183 - Supplying and flush mounting power coated metal box suitable for mounting modular switch plates. The boxshould be firmly flush mounted after due groove cutting in bricksor stoneor c.c wall - 8 Way.
80
261
20880
CNN184 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalor PVC box-1 to 3 Module
240
161
38640
CNN185 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalor PVC box-4 Module
360
175
63000
CNN186 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalor PVC box-6 Module
250
234
58500
CNN187 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalor PVC box-8 Module
340
284
96560
CNN188 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metalor PVC box-10-12 Module
10
344
3440
CNN189 - Supplying and fixing metal fan box with round hook
160
117
18720
CNN190 - Concealed conduite System- Supplying 20or 25or 32mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, Metal or PVC juction boxes adhesive paste etc., and runnning before connecting the slab. The conduite should be tied to the reinforcement rod by using binding wires and unused ways of juction boxes and pipes ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire wherever necessary -19or 20mm dia 2mm thick.
950
66
62700
CNN191 - Concealed conduite System- Supplying 20or 25or 32mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, Metal or PVC juction boxes adhesive paste etc., and runnning before connecting the slab. The conduite should be tied to the reinforcement rod by using binding wires and unused ways of juction boxes and pipes ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire wherever necessary -25mm dia 2mm thick
3550
77
273350
CNN192 - Concealed conduite System- Supplying 20or 25or 32mm dia 2mm 2.5mm thick heavy gauge PVC conduit pipe with suitable size bends, Metal or PVC juction boxes adhesive paste etc., and runnning before connecting the slab. The conduite should be tied to the reinforcement rod by using binding wires and unused ways of juction boxes and pipes ends should be covered using PVC end enclosures. run with 18 SWG GI fish wire wherever necessary -32mm dia 2.5mm thick
50
103
5150
CNN193 - Groove cutting - Supplying dia 2mmor 2.5thick heavy gauage PVC conduit pipe with bends, Metal juctions boxes adhesive paste etc. and bracing U or J hooks and cement plastering up to the surface of the brick level and run with 18 SWG GI fish wire run through out the conduit wherever necessary -25mm dia 2.5mm thick.
1750
79
138250
CNN194 - Supplying and fixing PVC or metal conduit deep junction box - 19or 20mm dia
200
49
9800
CNN195 - Fabricating supplying and mounting MS box made out 14 SWG suitable for Flooror wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged fronth cover, equipped with tamper proof locking arrangemnets, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc. complete - 14SWg
120000
-
60000
CNN196 - Supplying, Fixing and wiring 0 to 600 volts 96x96mm AC volt meter on exixting pannel board
2
452
904
CNN197 - Supplying, fixing and wiring rotary selector switch suitable for volt meter
2
160
320
CNN198 - Supplying, fixing and wiring 50or 5 to 400or 5 Amps 5VA burden current transformer. Class 0.5 acurrcy with tape wound.
2
562
1124
CNN199 - Supplying and fixing of 3phase digital ammeter voltmeter
4
1425
5700
CNN200 - Supplying and fixing of LED type panel board indicating lamp.
15
515
7725
CNN201 - Supplying and fixing moulded case circuit breaker over the existing woodor panel board using neccesary screws bolts nuts and wiring complete. Protection of overload and short circuit with thermal magnetic release and earth fault as per IS 13947 (Icu=Ics) (WITH ALL LEAD AND LIFT AS PER DIRECTION OF ENGINEER IN CHARGE OF WORK.) - TPN - 160Amps 25kA
2
16973
33946
CNN202 - Supplying and fixing moulded case circuit breaker over the existing woodor panel board using neccesary screws bolts nuts and wiring complete. Protection of overload and short circuit with thermal magnetic release and earth fault as per IS 13947 (Icu=Ics) (WITH ALL LEAD AND LIFT AS PER DIRECTION OF ENGINEER IN CHARGE OF WORK.) - - TPN - 100Amps 25kA-
1
6086
6086
CNN203 - Supplying…… Amps rated 3 phase with neutral bus bar using rtequired capacity electronic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolicor FRPor DMC insulator which are mounted on powder coated 40x6mm M.S. flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cabels as per IS specification with necessary bolts, nuts, and washers etc , complete -250Amps 4x30x10mm Aluminum strips.
8
3435
27480
CNN204 - Supplying and fixing mainiature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required- 63amps TPN.
2
1195
2390
CNN205 - Supplying and fixing mainiature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required- 40amps TPN.
7
1080
7560
CNN206 - Supplying and fixing mainiature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required- 50-63A DP.
1
1102
1102
CNN207 - Supplying and fixing mainiature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required- 40A DP.
3
1060
3180
CNN208 - Supplying and fixing mainiature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required- 6-32A TPN
2
1717
3434
CNN209 - Supplying and fixing mainiature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required-6-32A DP
2
739
1478
CNN210 - Supplying and fixing regular MCB distribution boards on wallor woodenboardor flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MECB's single pahseor 3 phase or single door with powder coated painting etc., complete- 6 WAY SPandNor DP.
1
1186
1186
CNN211 - Supplying and fixing mainiature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required -6-32A DP.
5
1195
5975
CNN212 - Supplying and fixing mainiature circuit breakers on existing MCB distribution boards using necessary fixing materials and wiring complete as required -50-63A DP
1
1102
1102
CNN213 - Supplying and fixing mainiature circuit breakers on existing MCB distribution -boards using necessary fixing materials and wiring complete as required-40A RCCB
15
4559
68385
CNN214 - Supplying and fixing mainiature circuit breakers on existing MCB distribution -boards using necessary fixing materials and wiring complete as required-40amps TPN
6
1080
6480
CNN215 - Supplying and fixing mainiature circuit breakers on existing MCB distribution -boards using necessary fixing materials and wiring complete as required-40A DP
3
1060
3180
CNN216 - Supplying and fixing mainiature circuit breakers on existing MCB distribution -boards using necessary fixing materials and wiring complete as required-6-32A DP
6
739
4434
CNN217 - Supplying and fixing mainiature circuit breakers on existing MCB distribution -boards using necessary fixing materials and wiring complete as required-6-32A SP
144
415
59760
CNN218 - Supplying and fixing regular MCB distribution boards on wallor woodenboardor flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MECB's single pahseor 3 phase or single door with powder coated painting etc., complete- 12 Way SPandN (Double door).
1
2329
2329
CNN219 - Supplying and fixing regular MCB distribution boards on wallor woodenboardor flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MECB's single pahseor 3 phase or single door with powder coated painting etc., complete- 8way ETPandN (Double door)
5
6091
30455
CNN220 - Supplying and fixing regular MCB distribution boards on wallor woodenboardor flush mounting using required clamps, bolts,nuts etc., with provision for fixing suitable type capacity MECB's single pahseor 3 phase or single door with powder coated painting etc., complete-6 Way SPandN (Single door)(One with timer)
3
1186
3558
CNN221 - Supplying and fixing of modular switchor socketor stepped electonic fan regulatoror dimmeror telephone socket etc on existing modular switch plate..(AS per IS 3854 and IS 1293) TVor Telephone socket
25
156
3900
CNN222 - Supplying and drawing PVC isulated gas injected physical foam jelly flooded co-axial tv cable RG-6
100
44
4400
CNN223 - RJ45or I.O outlet
100
195
19500
CNN224 - Supplying and drawing UTP -CAT 6E lan cable(Including telephone)
1200
38
45600
CNN225 - Supplying and fixing Ior O socket with back box -Single Ior O
125
490
61250
CNN226 - Supplying and fixing of 24 port gigabyte network switch
4
41450
165800
CNN227 - Supply and fixing of patch panel of lan cabling -24 Port 10or 100 patch panel
4
7900
31600
CNN228 - Supplying and fixing of switch rac with power manager and cable manager - 9U
with 450mm depth
1
8476
8476
CNN229 - Chemical Earthing for grounding,conduits,IC cutouts and other euipments on the meter board by using copper bondedor SS rod with earth enhancing backfill compound which is non corrosive,thermally conductive,potential to permissible limits,superior fault conduction capacity,non toxic,weather resistance and capable of achieving ohomic value less than one ohm. - using 10ft copper bonded rod with backfill compound
20
4528
90560
CNN230 - Supplying and running of GIor Cu strips for grounding connections,using necessary fixing materials as required GI Strip-25x3mm.
175
82
14350
CNN231 - Supplying and running of GIor Cu strips for grounding connections,using necessary fixing materials as required GI Strip -8SWG GI wire.
80
25
2000
CNN232 - Supplying and running of GIor Cu strips for grounding connections,using necessary fixing materials as required Cu. Strip - 25x3mm
250
570
142500
CNN233 - Fixing of all types of indoor light fittings on call and ceiling and rafters -On wallor ceiling
425
122
51850
CNN234 - Fixing of post topor gateor garden fitting on existing CIor GI pipe using suitalbe wires
40
198
7920
CNN235 - Fixing of ceilingor wall mounting fan
160
171
27360
CNN236 - Fixing of exhaust fan making suitable notch in the wall and finishing with cement mortrar and colouring to match the existing wall or brackets with bolts, nuts and 5A ceiling rose with pvc insulated twin core wire of approved make with wire mesh and wooden frame.
15
707
10605
CNN237 - Supply and installation of lightning arrestor as per PWD electrical IS 1239 wiring
compete
1
131000
131000
CNN238 - 25x6mm GI strip for grounding of LA system
300
128
38400
CNN239 - Providing and laying of reinforced cement concrete pipe NP2 including pointing ends, fixing collars with cement mortar 1-2 including cost of materials,labour,HOM complete as per specifications-150mm dia.
1700
391
664700
CNN240 - Supplying of 1.1kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanized, steel strip confirming ti IS - 3975 - 1990 and extruded PVC outer sheathed armoured cable with specified IS-1554 part - 1-1988-3.5core 120Sqmm(exact measurement as per site).
75
2703
202725
CNN241 - Supplying of 1.1kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanized, steel strip confirming ti IS - 3975 - 1990 and extruded PVC outer sheathed armoured cable with specified IS-1554 part - 1-1988-3.5core 35Sqmm(exact measurement as per site)
80
2385
190800
CNN242 - Supplying of 1.1kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathed, galvanized, steel strip confirming ti IS - 3975 - 1990 and extruded PVC outer sheathed armoured cable with specified IS-1554 part - 1-1988-3 core 10Sqmm(exact measurement as per site)
100
413
41300
CNN243 - Labour charges for laying of 1.1kV class UG cables in existing trench GI pipeor stoneware pipeor on wallor on pole as required -In existing trench-2.5sqmm to 25sqmm - (exact measurement as per site).
125
21
2625
CNN244 - Labour charges for laying of 1.1kV class UG cables in existing trench GI pipeor stoneware pipeor on wallor on pole as required - In existing trench -35sqmm to 95sqmm (exact measurement as per site).
80
31
2480
CNN245 - Labour charges for laying of 1.1kV class UG cables in existing trench GI pipeor stoneware pipeor on wallor on pole as required - In existing trench -120qmm to 240sqmm (exact measurement as per site)
75
33
2475
CNN246 - Providing and filling sand in excavated trench to cover already laid UG cable to a
depthh of 150mm all- around the cable
150
100
15000
CNN247 - Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kV class (Metal Only)-25mm dia
2
143
286
CNN248 - Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 kV class (Metal Only)-75mm dia
8
380
3040
CNN249 - Supplying and fixing of class A GI pipe - 80mm
50
688
34400
CNN250 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 120Sq.mm long barrel.
4
190
760
CNN251 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 35 Sq.mm long barrel
2
20
40
CNN252 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes - 10 Sq.mm long barrel
6
8
48
CNN253 - Constructing water tight 450x450x750mm(depth) size brick masonary inspection
chamber
10
4456
44560
CNN254 - RCC DP Structure using 9Mtrs RCC Pole with WL 145kG
1
17450
17450
CNN255 - 11KV 5KN polymeric pin insulatos 24mm dia FRP rod
6
180
1080
CNN256 - 45kN Disc Insulators
6
164
984
CNN257 - Guy Set Complete with no.15 strain insulator and concreting
2
830
1660
CNN258 - Spiral Earth Electrode
2
165
330
CNN259 - Concrete for Guy set(Without cement)
2
158
316
CNN260 - Cautionor Danger board as per Drawing No.BESCOMor GMor CPor 40or Dt-24.10.07
1
146
146
CNN261 - Anti Climbing Device (12mtrsor 1kg GI Barbed Wire) Lor s
2
76
152
CNN262 - Earthing material pipe type for grounding
1
1501
1501
CNN263 - 11kV lightning arrestors-metal oxide 9kV,5kA polymeric type with ground connectors
1
1335
1335
CNN264 - 11kV 400A Dor B GOS
1
17545
17545
CNN265 - H-Frame for mounting GOS
1
3724
3724
CNN266 - DOLO Cut out
1
4848
4848
CNN267 - Transportaion charges at 2percentage on total material cost
1
672
672.4
CNN268 - RCC DP Structure using 9Mtrs RCC Pole with WL 145kG
1
3578
3578
CNN269 - Spiral Earth Electrode
2
61
122
CNN270 - Fixing of Guy set complet
2
390
780
CNN271 - Cautionor Danger board as per Drawing No.BESCOMor GMor CPor 40or Dt-24.10.07
1
53
53
CNN272 - Anti Climbing Device (12mtrsor 1kg GI Barbed Wire) Lor s
2
28
56
CNN273 - Earthing material pipe type for grounding
1
631
631
CNN274 - 11kV lightning arrestors-metal oxide 9kV,5kA polymeric type with ground connectors
1
28
28
CNN275 - 11kV 400A Dor B GOS
1
777
777
CNN276 - H-Frame for mounting GOS
1
210
210
CNN277 - DOLO Cut out
1
155
155
CNN278 - Loading and unloadiing of poles - 9mtrs long
2
92
184
CNN279 - Guy concreting with boulders and sand
2
174
348
CNN280 - Painting of RCC poles
2
960
1920
CNN281 - Concreting of 9mtrs RCC pole -a)Base concreting with 1-4-8,500x650x150mm
2
237
474
CNN282 - b)Pole concreting with 1-2-4,650x500x1700mm
2
2746
5492
CNN283 - b)Pole coping with 1-2-4,150mm alround pole for a height of 300mm
2
471
942
CNN284 - RCC Pole-9 Mtrs Long, 145kG WL
50
6258
312900
CNN285 - Horizontal cross arms with clamps,HTST supports,bolts,nuts and washers (for RCC Poles)
6
444
2664
CNN286 - DP Structure with 9mtr RCC Poles
6
17450
104700
CNN287 - 11kV special 3pin cross with brass,clamps,bolts,nut and washers
18
1276
22968
CNN288 - 11KV 5KN polymeric pin insulatos 24mm dia FRP rod
150
180
27000
CNN289 - 45kN Disc Insulators
4
164
656
CNN290 - Guy Set Complete with no.15 strain insulator and concreting
4
830
3320
CNN291 - Rabbit ACSR conductor
2
36497
72994
CNN292 - PG Clamps for Rabbit conductor
4
79
316
CNN293 - Spiral Earth Electrode
54
207
11178
CNN294 - EG stirrups with GI wire laching
45
191
8595
CNN295 - Cautionor Danger Board as per Drawing No. BESCOMor GMor CPor 40or Dt-24.10.07
4
146
584
CNN296 - Anti climbing Device (12mtrsor 1kg GI Barbed wire)Lor s
50
76
3800
CNN297 - 8mtr long RCC pole for stud with 2no.s of 2pin cross arms
4
5042
20168
CNN298 - Guarding for road crosiing of 11kV line using GI wire and 4pin cross arms-40mtr span
2
4266
8532
CNN299 - Transportaion charges at 2percentage on total material cost
1
12007
12007.5
CNN300 - Erection of RCC Pole-9 Mtrs Long, 145kG WL
50
1166
58300
CNN301 - Fixing of 11kV Horizontal cross arms with clamps,HTST supports,bolts,nuts and washers (for RCC Poles)
6
106
636
CNN302 - Erection of DP Structure with 9mtr RCC Poles
6
3578
21468
CNN303 - 11kV special 3pin cross with brass,clamps,bolts,nut and washers
18
106
1908
CNN304 - Guy Set Complete with no.15 strain insulator and concreting
4
390
1560
CNN305 - Stringing of Rabbit ACSR conductor
2
2869
5738
CNN306 - Spiral Earth Electrode
54
61
3294
CNN307 - EG stirrups with GI wire laching
45
109
4905
CNN308 - Cautionor Danger Board as per Drawing No. BESCOMor GMor CPor 40or Dt-24.10.07
4
53
212
CNN309 - Anti climbing Device (12mtrsor 1kg GI Barbed wire)Lor s
50
28
1400
CNN310 - Guarding for road crosiing of 11kV line using GI wire and 4pin cross arms-40mtr s
2
1165
2330
CNN311 - Loading and unloadiing of poles -9mtrs long
54
92
4968
CNN312 - Loading and unloadiing of poles -8mtrs long
4
69
276
CNN313 - Guy concreting with boulders and sand
4
174
696
CNN314 - Painting of RCC poles
58
960
55680
CNN315 - Concreting of 9mtrs RCC pole a)Base concreting with 1-4-8,500x650x150mm
58
237
13746
CNN316 - b)Pole concreting with 1-2-4,650x500x1700mm
58
2746
159268
CNN317 - b)Pole coping with 1-2-4,150mm alround pole for a height of 300mm
58
471
27318
CNN318 - Supersision charges as per technical specifications complete as direction of the Engineer-in-charge
1
104357
104357.84
CNN319 - Security depost- 100 Kva as per technical specifications complete as direction of the Engineer-in-charge
1
50000
50000
CNN320 - Electrical inspectorate charges as per technical specifications complete as direction of the Engineer-in-charge
1
50000
50000
CNN321 - Providing chain link fencing 50mm size of 8hauge propoerly stretched between rectangle poles and fixed with suitable bolts and nuts,the tree ends shall be welded ti the pole and block pipe at top and bottom as required including cost of all materials,labour,cutting,bendingwherever necessary wastage and lapping etccomplet,as per the direction of the engineer incharge of work including 2 coats of approved quality paint over one coat of primer oaint.
50
858
42900
CNN322 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require-White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps-Ground Floor
34
2980
101340.4
CNN323 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require-White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps-First Floor
11
3010
33115.5
CNN324 - Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require-White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps-Second Floor
17
3040
51685.1
CNN325 - Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litreor 6 litre (adjustable to 4 litreor 8 litres), including seat cover,and cistern fittings, nuts, bolts and gasket etc complete-Ground Floor
18
11673
210114
CNN326 - Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litreor 6 litre (adjustable to 4 litreor 8 litres), including seat cover,and cistern fittings, nuts, bolts and gasket etc complete-First Floor
12
11789
141476.4
CNN327 - Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litreor 6 litre (adjustable to 4 litreor 8 litres), including seat cover,and cistern fittings, nuts, bolts and gasket etc complete-Second Floor
9
11906
107157.6
CNN328 - Providing and fixing CP. Health faucet with flexible hose,CP Bibcock with 2 in 1 connectvity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete Make - Ground Floor
17
3000
51000
CNN329 - Providing and fixing CP. Health faucet with flexible hose,CP Bibcock with 2 in 1 connectvity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete Make - First Floor
17
3000
51000
CNN330 - Providing and fixing CP. Health faucet with flexible hose,CP Bibcock with 2 in 1 connectvity, wall flange, supporting hook with screws, fixing materials and sealant to all sides of wall flange complete Make - Second Floor
9
3000
27000
CNN331 - Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 -Ground Floor
48
660
31699.2
CNN332 - Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 -First Floor
30
667
20010
CNN333 - Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931 -Second Floor
26
673
17513.6
CNN334 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931- Ground Floor
32
754
24128
CNN335 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931- First Floor
36
761
27414
CNN336 - Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS 8931- Second Floor
36
769
27687.6
CNN337 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete-Ground Floor
16
1268
20300.8
CNN338 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete-First Floor
10
1281
12815
CNN339 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete-Second Floor
10
1294
12942
CNN340 - Supplying , shifting to the place of installation and fixing testing and commissioning of stainless steel soap dish 150 x 150mm including cutting and setting in walls with cement joints and making good the wall. Make JAQUAR Model No- ACN -1131N-Ground Floor
19
1325
25175
CNN341 - Supplying , shifting to the place of installation and fixing testing and commissioning of stainless steel soap dish 150 x 150mm including cutting and setting in walls with cement joints and making good the wall. Make JAQUAR Model No- ACN -1131N-First Floor
15
1325
19875
CNN342 - Supplying , shifting to the place of installation and fixing testing and commissioning of stainless steel soap dish 150 x 150mm including cutting and setting in walls with cement joints and making good the wall. Make JAQUAR Model No- ACN -1131N-Second Floor
15
1325
19875
CNN343 - Providing and fixing Single lever wall mixer with L shaped Tubular bend set for overhead shower made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class ( Premium ) -Ground Floor
1
8784
8784.9
CNN344 - Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class -Ground Floor
1
1312
1312.5
CNN345 - Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class -First Floor
1
1325
1325.6
CNN346 - Providing and fixing Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class Second Floor
1
1338
1338.7
CNN347 - Providing and fixing Stainless Steel A ISI 304 (18or 8) kitchen sink as per IS-13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required - 510x1040 mm bowl depth 250 mm-Make- NIRALI - Ground Floor
1
5842
5842.7
CNN348 - Providing and fixing Sink cock with swivel spout and wall flange, wall mountable made of Stainless steel with all concealed fitting arrangements and all necessary accesories complete - Class ( Premium ) Ground Floor -INTERNAL SEWERAGE SYSTEM
2
3001
6002.8
CNN349 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete- 40mm Dia-Ground Floor
44
91
4026
CNN350 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete- 40mm Dia-First Floor
27
92
2494.8
CNN351 - Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete- 40mm Dia-Second Floor
27
93
2521.8
CNN352 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for- PVC pipes 75mm dia., 6 kgor sqcm and class 3-Ground Floor
91
228
20820.8
CNN353 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for- PVC pipes 75mm dia., 6 kgor sqcm and class 3-first Floor
55
231
12710.5
CNN354 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for- PVC pipes 75mm dia., 6 kgor sqcm and class 3-second Floor
50
233
11670
CNN355 - Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments - Ground Floor
14
69
975.8
CNN356 - Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments - First Floor
12
70
844.8
CNN357 - Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments - second Floor
12
71
853.2
CNN358 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- Ground Floor
10
199
1997
CNN359 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- First Floor
10
201
2017
CNN360 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- Second Floor
10
203
2037
CNN361 - Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Ground Floor
10
121
1217
CNN362 - Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-First Floor
10
122
1229
CNN363 - Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-second Floor
10
124
1241
CNN364 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for-PVC pipes 110mm dia., 6 kgor sqcm and class 3-Ground Floor
50
427
21370
CNN365 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for-PVC pipes 110mm dia., 6 kgor sqcm and class 3-First Floor
40
431
17268
CNN366 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for-PVC pipes 110mm dia., 6 kgor sqcm and class 3-Second Floor
40
436
17440
CNN367 - Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments- Ground floor
10
177
1778
CNN368 - Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments- first floor
10
179
1796
CNN369 - Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments- second floor
10
181
1814
CNN370 - Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Grund floor
10
314
3141
CNN371 - Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-first floor
10
317
3172
CNN372 - Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-second floor
10
320
3204
CNN373 - Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Ground floor
10
261
2610
CNN374 - Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-First floor
10
263
2637
CNN375 - Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-second floor
10
266
2663
CNN376 - Providing and fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete. Ground Floor.
40
460
18400
CNN377 - Providing and fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete. First Floor.
31
460
14260
CNN378 - Providing and fixing, testing and commissioning u PVC multi inlet floor trap 75mm dia conforming to IS 13592 with required P C C support placed to required level as per site condition complete. second Floor.
31
460
14260
CNN379 - Supplying and fixing PVC P trap 110mm dia, of self cleansing design with or without vent arm complete including cutting and making good the walls and floors Ground Floor.
3
610
1830
CNN380 - Providing and Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete- Ground floor
42
282
11844
CNN381 - Providing and Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete- First floor
31
282
8742
CNN382 - Providing and Fixing in position heavy duty C P grating 125mm dia, with frame of below mentioned sizes including jointing and fixing material complete- Second floor
31
282
8742
CNN383 - Providing and grouting sleeves made in beamor slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all leads and lifts complete Size - 150 mm dia-Ground Floor
19
600
11400
CNN384 - Providing and grouting sleeves made in beamor slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all leads and lifts complete Size - 150 mm dia-First Floor
15
600
9000
CNN385 - Providing and grouting sleeves made in beamor slab to draw waste and soil lines at all floor level of the below mentioned sizes , including condcting water ponding test to ensure zero leakage with all leads and lifts complete Size - 150 mm dia-second Floor
15
600
9000
CNN386 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 20 mm dia pipe nominal OD pipes -Ground Floor
78
394
30747.6
CNN387 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 20 mm dia pipe nominal OD pipes -First Floor
50
398
19905
CNN388 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 20 mm dia pipe nominal OD pipes -Second Floor
50
402
20105
CNN389 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 25 mm dia pipe nominal OD pipes - Ground Floor
60
496
29766
CNN390 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 25 mm dia pipe nominal OD pipes - First Floor
45
501
22549.5
CNN391 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 25 mm dia pipe nominal OD pipes - second Floor
60
506
30360
CNN392 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 32 mm dia pipe nominal OD pipes - Ground Floor
72
579
41709.6
CNN393 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 32 mm dia pipe nominal OD pipes - First Floor
60
585
35106
CNN394 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00 mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete,As per direction of engineer in charge Concealed work including cutting chases and good the walls etc. 32 mm dia pipe nominal OD pipes - Second Floor
96
590
56726.4
CNN395 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete - 20mm nominal bore -Ground Floor
8
326
2612.8
CNN396 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete - 20mm nominal bore -First Floor
2
326
653.2
CNN397 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete - 20mm nominal bore -Second Floor
6
326
1959.6
CNN398 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)- 25mm nominal bore- Ground Floor
6
571
3426
CNN399 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)- 25mm nominal bore- First Floor
6
576
3460.2
CNN400 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end)- 25mm nominal bore- Second Floor
6
582
3494.4
CNN401 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) -32mm nominal bore-Ground floor
8
621
4975.2
CNN402 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) -32mm nominal bore-First floor
8
628
5024.8
CNN403 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) -32mm nominal bore-Second floor
8
634
5075.2
CNN404 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)-20 mm dia pipe nominal OD pipes - Ground floor
24
225
5416.8
CNN405 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)-20 mm dia pipe nominal OD pipes - First floor
24
225
5416.8
CNN406 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)-25 mm dia pipe nominal OD pipes - Ground floor
64
307
19699.2
CNN407 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)-25 mm dia pipe nominal OD pipes - First floor
48
310
14923.2
CNN408 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)-25 mm dia pipe nominal OD pipes - Second floor
48
314
15072
CNN409 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)-32 mm dia pipe nominal OD pipes -Ground Floor
150
386
58035
CNN410 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)-32 mm dia pipe nominal OD pipes -First Floor
60
390
23448
CNN411 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)-32 mm dia pipe nominal OD pipes -Second Floor
24
394
9470.4
CNN412 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)
336
511
171696
CNN413 - Providing and fixing chlorinated poly vinyl chloride ( CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete As per direction of engineer in charge (external work)- 50 mm dia pipe nominal OD pipes
200
772
154460
CNN414 - Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 20mm nominal bore
32
336
10764.8
CNN415 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 25mm nominal bore
32
588
18819.2
CNN416 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 32mm nominal bore
32
640
20499.2
CNN417 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 40mm nominal bore Third Floor
8
752
6016
CNN418 - Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) 50mm nominal bore
6
915
5495.4
CNN419 - Providing and placing on terrace, polyethylene water storage tanks As per IS 12701 Marked with cover and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes But with out fittings and the base support for the tank
10000
9
97000
CNN420 - Supplying and fixing suction Y or pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 50 mm dia
2
3620
7240
CNN421 - Supplying, fixing, testing and commissioning of PVC welded rain water head or khurras dome type grating with puddle flange to fix head in RCC slab specially fabricated from minimum 4mm thick PVC sheet, including removable heavy duty PVC grating of 50 x 3 mm thick PVC flats (Round or Square) as per approved design The quoted rate shall include for necessary grouting the khurras base with approved sealant complete all as shown in the drawing and as specified. 150 x 150mm PVC Grating
8
690
5520
CNN422 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for- PVC pipes 75mm dia., 6 kgor sqcm and class 3-Ground Floor
196
228
44844.8
CNN423 - Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments First Floor
64
70
4505.6
CNN424 - Supply and delivery at site special moulded variety 75 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments Second Floor
64
71
4550.4
CNN425 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Ground Floor
30
69
2091
CNN426 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-First Floor
35
70
2464
CNN427 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Second Floor
45
71
3199.5
CNN428 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- Ground Floor
30
199
5991
CNN429 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- first Floor
35
201
7059.5
CNN430 - Supply and delivery at site special moulded variety 75 mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- Second Floor
40
203
8148
CNN431 - Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- Ground floor
35
121
4259.5
CNN432 - Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- First floor
25
122
3072.5
CNN433 - Supply and delivery at site special moulded variety 75 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments- Second floor
25
124
3102.5
CNN434 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 110mm dia., 6 kgor sqcm and class 3-Ground Floor
165
427
70521
CNN435 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 110mm dia., 6 kgor sqcm and class 3-First Floor
155
431
66913.5
CNN436 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for PVC pipes 110mm dia., 6 kgor sqcm and class 3-Second Floor
110
436
47960
CNN437 - Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments- Ground Floor
35
177
6223
CNN438 - Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments- First Floor
35
179
6286
CNN439 - Supply and delivery at site special moulded variety 110 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments- Second Floor
40
181
7256
CNN440 - Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Ground Floor
35
314
10993.5
CNN441 - Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-First Floor
40
317
12688
CNN442 - Supply and delivery at site special moulded variety 110mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Second Floor
55
320
17622
CNN443 - Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Ground Floor
15
261
3915
CNN444 - Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-First Floor
20
263
5274
CNN445 - Supply and delivery at site special moulded variety 110 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments-Second Floor
35
266
9320.5
CNN446 - Supplying PVC ringtite pipes conforming to IS 4985-2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead and lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for 160mm dia PVC pipe Ground Floor
125
642
80337.5
CNN447 - Supply and delivery at site special moulded variety 160 mm dia PVC couplers as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark and with its latest amendments
10
348
3484
CNN448 - Supply and delivery at site special moulded variety 160mm dia PVC elbows as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments
10
489
4898
CNN449 - Supply and delivery at site special moulded variety 160 mm dia PVC tee as per IS 7834or 1987 and fabricated as per IG124or 1984 with ISI mark with its latest amendments
10
484
4846
CNN450 - Providing And fixing Square mouth stone ware gully trap SP-1 Complete With CI Grating Brick Masonry Chamber 100x100mm Size P trap With Non modular common burnt bricks of designation 3.5, with water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 KG, and frame to be not less than 2.70Kg as per the standard design
6
2633
15799.8
CNN451 - Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1-4 (1 cement - 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1-1.5-3 mix (1 cement - 1.5 fine sand - 3 graded stone aggregate 20 mm nominal size), foundation concrete 1-5-10 (1 cement - 5 fine sand - 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1-3 (1 cement - 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design- Inside dimensions 455x610 mm and 45 cm deep for single pipe line - With common burnt clay (non modular) bricks of class designation 3.5
12
5867
70412.4
CNN452 - Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portlandor Pozzolana cement, conical in shape at top, with CC 1-3-6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1-4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1-3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1-6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1-2-4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS-12592 with latest amendment, in CC 1-2-4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de-watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.H - Constructing Brick Masonry Circular Machinehole 1.2 m internal dia. , 1.3 M depth and SFRC cover and frame
2
38157
76315.8
CNN453 - Earth work in surface excavation for stripping, seating of bund, Road way by manual means for lowering and levelling the ground for all works other than foundation and depth in Ordinary rock and soft rock upto 300mm depth as per drawing and technical specifications, including setting out, barricading, caution lights, including dressing of excavated surfaces,disposing off or levelling the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usageand other appurtenances required to complete the work.
103
598
61594
CNN454 - DOMESTIC WATER TRANSFAR PUMP Supplying, installing, testing and commissioning of submersible or Mono blockelectrical driven pump 1set . (1 working and standby) domestic water pumps for pumping domestic water from U.G. sump to over head water tank, with all necessary arrangements to operate on 3HP 50 HZ, 440V AC supply fitted on a common base frame accessories to lift the pump during maintenance , necessary power connections, the supplier shall include the control panel and wiring from TPN switch to control panel and wiring upto pumps, the control panel comprising of Oor L relays, single phase preventor,separate overload trip and relayset, ONor OFFor TRIP indicating lamps,startor stop push buttons, With liquid level controlers, etc., complete as complete. Duty of the Pump 4 cum per hour at 20 TO 25 m head Make - Kirloskaror sugunaor texmoor CRI two set industrial type electronic automatic liquid level controllers, with stainless steel probes or sensors two set industrial type electronic automatic liquid level controllers, with stainless steel probes or sensors Ground Floor
4
24000
96000
CNN455 - Providing and fixing gun metal non- return valve of approved quality (screwed end) 32 mm nominal bore Vertical Ground Floor Vertical
2
1017
2035
CNN456 - Providing and fixing gun metal non- return valve of approved quality (screwed end) 40 mm nominal bore
8
1274
10192
CNN457 - Construction of brick masonry catch basin chamber chambers of internal clear dimension as mentioned below by using first class table moulded modular bricks 230 mm thick wall in cement mortor joints in 1-4, over CC 1-4-8 bed 150 mm thick including Supplying precast RCC perforated top slab in 1-2-4 Mix (1 cement- 2 coarse coarse sand- 8 graded stone aggregate), with angle iron frame, inside plastering15mm thick with CM 1-3 (1 cement--3 fine sand) finished very smooth with floating coat of neat cement and making benching and channelling in cement concrete 1-2-4 (1 cement- 2 coarse sand- 4 gradedstone aggregate) neatly finished complete as per standard design and as per drawing and specifications.Inside size of 600 x 600mm and depth not exceeding 600 x 600mm including Supplying 450 x 450mm RCC cover with MS L angle frame-
8
5767
46136
CNN458 - Construction of percolation well or rain water harvest pit of 2 m dia and 3m deep with precast RCC rings, coveringthe top with RCC slab including supply and fixing 600 x 600 RCC MH cover CI or MS rungs etc. The quoted rate shall include earth work excavation, back filling, removing excess earth and making good the floor. The percolation well harvest pit shall be constructed as per the detail drawings and specification shall consists of- Allernate layers of brick bats, activated charcoal, gravel, pebbles and toped with fine sand for good infiltration. 3 Nos. bore holes of 160 mm dia from the bottom of percolation pit for a depth of 6m, drilled by using auger manually.Bore hole to be filled with medium sized pebbles to provide mechanical strength to the holes and enhance infiltration.
Rate quoted shall be inclusive of earth work excavation, back filling, removing of excess earth as per the instructions of engineer - in charge
3
23236
69708
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%