Cauvery Neeravari Nigam Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 6,24,000Document Cost
Refer DocumentsTender Fee
₹ 5,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
CNNL/2024-25/OW/WORK_INDENT2242Tender No
CNNL/2024-25/OW/WORK_INDENT2242Tender Authority
Cauvery Neeravari Nigam Limited ViewPurchaser Address
-Website
http://http://knnlindia.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
004 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density,execute as per direction of Engineer-in-charge.
370.77
2686
996240.4515
... More
005 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators,including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, andall the other appurtenances required to complete the work as per technical specifications.Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates.execute as per direction of Engineer-in-charge.
40.19
6527
262354.2915
... More
006 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand).execute as per direction of Engineer-in-charge.
59.83
6708
401366.5635
... More
007 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.execute as per direction of Engineer-in-charge.
262.84
279
73411.212
... More
008 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. For Buildings. as per direction of Engineer-in-charge.
44.02
93929
4134791.997
... More
009 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification,all other type of structures.execute as per direction of Engineer-in-charge.
3.4
82961
282069.27
... More
010 - Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, foundation.execute as per direction of Engineer-in-charge.
45
7185
323325.9
... More
011 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. Footing.execute as per direction of Engineer-in-charge.
17.85
7759
138515.286
... More
012 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates,Plinth beams,execute as per direction of Engineer-in-charge.
24.87
10777
268042.1451
... More
013 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates, For columns.execute the work as directed by engineer incharge.
57.66
12214
704303.0616
... More
014 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates,Beams and Lintels,execute as per direction of Engineer-in-charge
16.65
11496
191412.396
... More
015 - Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates,slab.execute as per direction of Engineer-in-charge.
33.42
10777
360191.7366
... More
016 - Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necessary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications.M30 Design Mix Using 20 mm nominal size graded crushed coarse aggregates.execute as per direction of Engineer-in-charge.
667.39
7282
4859940.6539
... More
017 - Supply and Fixing of 200 mm thick cobble stone pavers of Approved colour for external surfaces such as pavements and driveways. The cobble stones, made from natural materials like granite or basalt, will have dimensions ranging from 100 mm to 150 mm in width and will feature a rough, slip-resistant surface.All stones must have a minimum compressive strength of 25 N/mm² and water absorption not exceeding 5%, conforming to IS 1124-1974. A bedding layer of sharp sand or crushed stone dust will be laid over a compacted granular base to ensure stability.The pavers will be installed in a staggered pattern with minimal gaps, finished to the required levels for proper drainage. Joints will be filled with fine sand or mortar as specified. Quality control measures will ensure uniformity, durability, and aesthetic appeal, with testing for strength and absorption included.The total cost will cover all materials, labor, and finishing required for a durable, high-quality cobblestone pavement.execute the work as directed by engineer incharge.
797.85
924
737213.4
... More
018 - Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M 15 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb laying machine, foundation concrete laid manually, all complete as per clause 409,. PCC M20 grade for kerb Cast in Situ.execute as per direction of Engineer-in-charge.
283.7
278
78939.525
... More
019 - Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work
17.48
8621
150704.694
... More
020 - Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work.
7.25
9317
67553.325
... More
021 - Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
322.62
585
188923.0458
... More
022 - Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
28.3
450
12747.735
... More
023 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
298.67
402
120268.4356
... More
024 - Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.
53.16
309
16466.31
... More
025 - Providing and fixing CNC Carved Stone Wall Cladding using 20mm thick sandstone, sized 600x300mm, proportionally cut to the required shape and pattern with paper joints. The sandstone is to be fixed using Roff Extrofix Ultra Adhesive/equivalent. Joints should be finished with white cement mixed with color pigments match the slab's color, ensuring seamless through-jointing with sealant. The work includes making 25mm x 12mm grooves in the joints. the cost includes of all materials, labor, curing, with all lead and lift as directed by engineer incharge
2322.48
810
1881208.8
... More
026 - Supply and installation of cast iron railings around the clock tower. railings casted with 2x2 inch square rods as per Approved architectural design. All components must be anchored securely with corrosion-resistant fasteners and finished with an anti-corrosive treatment for durability.The installation must comply with the approved architectural design and be executed under the supervision of the Engineer-in-Charge, ensuring high-quality workmanship and adherence to project specifications.As directed by the Engineer incharge.
510.65
1240
633206
... More
027 - Supply and installation of powder-coated mild steel windows and doors, partially glazed, as per architectural drawings and relevant IS standards. Frames and panels will be fabricated from high-quality mild steel, treated for corrosion resistance in accordance with IS 13620 and powder coated per IS 13871. Toughened glass will be installed using weather proof gaskets, following IS 16231 for glazing performance. Installation will be supervised by the Engineer-in-Charge, ensuring compliance with IS 1081 and precise alignment. As directed by the Engineer incharge.
36
8225
296100
... More
028 - Providing and installation of custom dome-shaped skylights using 20mm thick fiber sandwich glass, providing thermal insulation and UV protection. The skylight frames will be constructed from powder-coated mild steel for corrosion resistance and structural stability. Installation will follow architectural specifications, ensuring proper weatherproofing to prevent leakage. the cost includes all material ,transportation and installation charges ,execute the work as per the direction of engineeer incharge.
21.2
12550
266060
... More
029 - Supply and installation of metal-oxide varistor (MOV) lightning arresters for the clock tower, ensuring protection against lightning strikes and voltage surges. Each arrester shall meet IS 3070 (Part 2) and IEC 61643 standards, with a voltage rating suitable for the tower's electrical system, up to 36 kV, and a discharge current capacity of at least 10 kA.Constructed from durable, weatherproof materials, the lightning arresters must maintain an insulation resistance of a minimum of 1,000 M at 1 kV DC. Ground resistance shall not exceed 10 ohms, complying with IS 3043.All units shall be clearly marked with manufacturer details and voltage ratings. The work shall be executed under the direction of the Engineer-in-Charge to ensure compliance with all specifications.
1
63500
63500
... More
030 - Design, Supply and installation of a four-sided Heavy duty Gps auto re set Tower clock system with 1600mm diameter made of stainless steel wheels and pinions, high torque dual hybrid stepper motors and Proximity sensors to sense hours and minute hand positions for auto corrections. In built micro controller for driving the imported 2 stepper motor. The micro controller is based on auto-intelligent electronic control systems having RTC with high-stability quartz crystal and GPS synchronization. all gear is made of stainless steel(no plastic parts). Clock system included with Lithium ion Batteries, Lithium battery charger with back up 24hr on disconnection of power.Suitable Led light must be used for illuminating all dials at night. Programmable Timer for Illumination on/off the lights in evening and Morning time. Use Aerobic index dial , laser cut in steel with powder coat. Aluminum framed with powder. Power supplies can be fixed inside.The dial is fixed with 040 acrylic sheets for light passing . Hands made of solid aluminium sheet. Clock system supplied includes stand-in pendulum system which can rotate two and fro for aesthetic purpose. stand-in pendulum designed to rotate by self weight. Length of stand-in pendulum should match the space provided in the respective floor in the clock tower. Agency required design and supply the clock and stand-in pendulum installation supporting beam or structure. Agency must obatin the prior approval of all the design of the clock system before manufacturing. Maintenance plan needs be established to ensure long-term functionality and performance.Cost includes all material, Labour, scaffolding and all lead and Lift. to complete the work as directed by Engineer incharge.
1
1248000
1248000
... More
031 - Providing and laying marble flooring and skirting in required design and patterns as per architectural drawings laid on 20mm thick cement mortar 1:4, including arouting the joints with white cement and matching pigments.execute as per direction of Engineer-in-charge.
165.15
11300
1866195
... More
032 - Providing and laying vitrified floor tiles Size of Tile 500x500 mm with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete as per direction of Engineer-in-charge.
17.64
1136
20040.804
... More
037 - Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixed with chicken mesh for drop chajja,facia, backing to cup boards including cost of all materials, labour, providing and removing form work usage charges, curing, complete as per specifications
67.6
1689
114235.212
... More
038 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400% and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats @ 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer @150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. Thefinished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification
49.92
857
42823.872
... More
039 - Providing and laying Kota stone flooring, cut and dressed as per required sizes, designs, and patterns, according to the architectural drawings. The stones will be laid on a 20 mm thick cement mortar bed in a 1:4 mix (1 part cement, 4 parts sand). The joints will be grouted using white cement mixed with matching pigments to achieve a uniform finish. The surface will be cured properly to ensure durability.All work shall be executed under the direction of the Engineer-in-Charge, ensuring that the installation meets all specified standards and requirements.
36
2700
97200
... More
040 - Providing and laying Black Lapotra Granite stone flooring in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the engineer incharge.
13.66
2711
37033.626
... More
041 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge
338.62
105
35555.1
... More
038 - Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge.
438.67
133
58496.6445
... More
039 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied @ 3.28 L/10 m²) over and including priming coat of exterior primer applied @ 2.20kg/10 m² to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge
74.08
297
22012.872
... More
040 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.
97.11
175
17028.2385
... More
041 - Procurement of Ingredients:Procurement of farm yard manure/compost,sand and red-earth (ingredients required for raising seedlings inclusive of transportation,breaking of clods, sieving and heaping each ingredient separately at nursery site(Ceiling rate) (a) Fine coarse Red-earth/soil.execute as per direction of Engineer-in-charge.
65.2
1850
120620
... More
042 - Procurement of Ingredients:Procurement of farm yard manure/compost,sand and red-earth (ingredients required for raising seedlings inclusive of transportation,breaking of clods, sieving and heaping each ingredient separately at nursery site(Ceiling rate) (c) Farm yard manure/compost.execute as per direction of Engineer-in-charge.
13.04
1585
20671.9208
... More
043 - Providing and laying Hariyali or other approved quality turfing sods for slopes of earthen embankment over 20 mm thick fine sand backing including cost of all materials, machinery, labour, preparing surface, spreading and tamping sand, watering for 15 days etc., complete with lead upto 1 km and all lifts.execute as per direction of Engineer-in-charge.
130.4
1850
241240
... More
044 - Design, supplying, erecting testing and commissioning of - Passenger/ Bed-cum-passenger hospital lift with speed of 1mtr per second, variable voltage variable frequency drive, with or without machine room for the available well size, operating at 415 V 3 phase 50 cycles AC supply, powder coated / Stainless Steel car entrance doors enclosures with suitable colour vinyl flooring, LED car illumination, emergency light, intercom and fan as desired by the user, central opening / side opening door with or without attendant operation, 7 segment display buttons, call register indicator, fireman drive, SS handrails inside car, full length infrared curtain in car door, automatic rescue device with batteries,voice announcing in regional/ international languages, Braille buttons with one year warranty and maintenance with necessary scaffolding and minor civil works like fixing of guide rail, counter weight etc.,The total product and services shall adhere to IS 14665/2016 ( with latest amendments) part/section 1 to 5 with regards to general guidelines of fire safety rated doors, MRLL beams, pressure switch, manual change over for doors during emergency, ARD of 10 times with sufficient battery back up and standard dimensions of chair car and door openings for all sizes and capacities of lifts including fitness certificate and duly observing all other safety norms prescribed and adhere to CPWD specifications, PCB Norms, National Electricity Code (NEC), NBC-2016, IEC and Karnataka State Lifts, Escalators and Passengers Conveyers Act 2012 and Rules 2014. The Supplier shall be registered in Government Electrical Inspectorate in the State of Karnataka.6 Passengers-3 stops with machine finish room-SS finish.execute as per direction of Engineer-in-charge.
1
1427016
1427016.58
... More
045 - Supply and Fixing of RCC (Reinforced Cement Concrete) precast balustrades railings at the corners of stairs and balconies, in accordance with the approved architectural design. Each balustrade will be constructed from high-strength RCC, adhering to IS 456 standards, ensuring durability and structural integrity with a compressive strength of 20 MPa to 30 MPa. During installation, railings needs to be securely anchored to the substrate, with careful alignment to ensure safety and aesthetic integration. Protective coatings to be applied to enhance weather resistance. All work will comply with relevant safety regulations and building codes. cost includes all material, casting, curing, scaffolding and all lead and Lift. to complete the work as directed by Engineer incharge.
240.2
1940
465988
... More
046 - Manufacture and Fixing of Glass Reinforced Concrete (GRC) Window Architrave, Designer Emblems, cornice, Designer piers and Designer pillar moulds as per given Architectural drawing. Panels should be moulded using white cement and 163/micron-10 fine silica sand (for a smooth finish) of Approved cement plaster ratio and Alkali Resistant (AR) glass fibers (minimum zirconium dioxide (ZrO2) content of 16%. AR glassfibres for use in GRC shall conform to the requirements of EN 15422, EN 14649 category B, or other equivalent national standards) reinforced by embedded 6mm steel bars. Suitable Super Plasticizer (0.4%) and polymer (0.5%)must be used to enhance the properties.The panels should be mounted on a steel frame made from 100x100 mm square tubes (3mm thickness), secured with Hilti fasteners (HRD C 10x140 and HRD C 10x160) with duco paint finish. Specification for the Manufacture, Curing & Testing of Glassfibre Reinforced Concrete (GRC) Products are conforming to The International Glassfibre Reinforced Concrete Association (GRCA) and EN Standards. cost includes all material, casting, curing, scaffolding and all lead and Lift. to complete the work as directed by Engineer incharge.
4801.5
1750
8402625
... More
047 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
2.52
2764
6966.918
... More
048 - Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
1
25920
25920.3
... More
049 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.
69.89
593
41462.2425
... More
050 - Providing and fixing on wall face unplasticised Rigid PVC rain water B147pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75 mm diameter.execute the work as directed by engineer incharge.
40
206
8274
... More
051 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.in all kinds of soils. Depth upto 1.50m.execute as per direction of Engineer-in-charge.
8.55
508
4345.11
... More
052 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LT UG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm).execute the work as directed by engineer incharge.
0.7
139549
97684.3
... More
053 - Fabricating supplying and mounting MS box made out .SWG suitable for floor /wall mounting, fully weather proof with provisionfor better heat dissipation, provided with hinged front cover,equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 14 SWG.execute the work as directed by engineer incharge.
7800
-
3900
... More
054 - Supply and Installation / Fixing / Provision of Pole box with HRCFuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Phconnections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyreneenclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasketwith provision for cable entry through IP65 Thermoplastic,polyamide glands and/or grommets. 260 mm x 210 mm x 116 mm.execute as per direction of Engineer-in-charge.
14
2470
34580
... More
055 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistancesingle core in open or concealed system of wiring with specified IS 694:2010.execute as per direction of Engineer-in-charge.
86
42
3612
... More
056 - Supplying of feet -PVC Batten with integrated LED tube .W with high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220 240V 50 60Hz Power factor 0.9 along with CE approved.2 years Warranty against any manufacturing defect working under standardelectrical condition. LED light fitting 1x4-36/40 W.execute as per direction of Engineer-in-charge.
10
1269
12690
... More
057 - Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 2310.0076" twin twisted PVC insulated wires,required Nos of round blocks and clamps.execute as per direction of Engineer-in-charge.
10
490
4900
... More
058 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of
Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 .(Icu=100% lcs). In 4P MCCB, all Poles should have protection for
Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility forsegregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation
between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open). Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism,100 A 25 kA.execute the work as directed by engineer incharge.
2
6086
12172
... More
059 - Supplying . A rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete,100 A 4 x 30 x 6 mm Aluminium Strips.execucute the work as directed by engineer incharge.
15
2465
36975
... More
060 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 70 Sqmm, 3.5 Core, (18 GI Strips - 4 x 0.8 mm).execute the work as directed by engineer incharge.
0.05
317912
15895.6
... More
061 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staf.3x95 to 150 Sqmm
0.5
61322
30661
... More
062 - Supply and installation of Wall Wash lighting in and 24W, designed with architectural illumination. Operating at 24V DC with a non integral constant voltage driver, should offers excellent performance temperatures ranging from 15 C to 50 C. Constructed from corrosion-resistant aluminum with an IP68 rating, should be ideal for outdoor use. system should provides up to 50,000 hours of life with various beam angles and color temperatures (3000K, 4000K, 6000K), ensuring versatile lighting. Dimming options and compliance with CE, RoHS,and ENEC standards make it reliable and adaptable for any project, with a 3 to 5 year warranty.execute the work as per the direction of engineer incharge.
24
25270
606480
... More
063 - supply and installation of a Step Light with an IP68 rating for outdoor use. The unit should consist of two 2W LED modules operating at 3000K to provide warm white illumination. should features a 29 beam angle for focused lighting, enhancing visibility and safety on stairways and pathways.Constructed from durable, weather-resistant materials, the Step Light should allows for versatile installation on various surfaces. Compliance with safety standards is required, with relevant certifications to be provided. A 3 to 5-year warranty should cover defects, and after-sales support will include technical assistance and spare parts. Installation shall be executed per the Engineer in Charge’s directions, ensuring seamless project integration.
24
8650
207600
... More
064 - supply and installation of a Column Beam Light designed for versatile illumination in architectural applications. The unit features a wattage of 1 x 4W and compact dimensions of 70 x 68 x 90 mm. shoild utilizes high-quality CREE LED chips and is constructed from durable die-cast aluminum, available in grey or black.Operating at a Color Correlated Temperature (CCT) of 3000K with a Color Rendering Index (CRI) of 80, the light emits warm white illumination, ensuring accurate color representation. The 38 beam angle focuses light effectively, providing a luminous flux of 273 lumens.With an IP68 rating, the Column Beam Light is protected against dust and splashes of water, making it suitable for outdoor use. Installation will be performed according to the Engineer in Charge’s directives, ensuring compliance with project specifications.
40
6100
244000
... More
065 - Supply and installation of 3-meter street light poles made from high-quality cast iron, ensuring durability and corrosion resistance as per Indian Standards (IS codes).The poles should feature a single-arm design that supports luminaires weighing up to 25 kg, optimized for effective light distribution in urban areas. The base diameter will range from 3 to 7 inches for secure installation. Each pole should have pre-drilled holes and a reinforced base plate to meet IS 456 for structural integrity.A weather-resistant coating to protect against rust, conforming to IS 2074. Installation will comply with the Engineer in Charge’s directives, ensuring adherence to IS 15983.
12
56500
678000
... More
066 - supply and installation of an inside ceiling light with high-quality CREE LED chips with a power consumption of 12W and a luminous output of 810 lumens.The fixture's dimensions will be 57.5 x 160 x 137 mm, with a cut-out size for standard installation, in color temperatures of 3000K (warm white) and 4000K (neutral white), it should offer two body color options: white + black and black gold.
With a beam angle of 24 and a Color Rendering Index (CRI) of 80, this light will provide focused illumination while ensuring accurate color representation. Installation will adhere to the Engineer in Charge’s directives,
20
11210
224200
... More
067 - Supply and installation of an outdoor wall light with dimensions of 27 x 17 x 44 cm and a weight of 860 grams. Constructed from durable metal and glass, should have a black finish for aesthetic appeal.The fixture should includes a metal shade and accommodates an E27 holder and plug type for easy installation and bulb replacement. This specification aims to provide a reliable outdoor lighting solution that enhances visibility and safety. All installations will adhere to the directives of the Engineer in Charge.
24
13950
334800
... More
068 - supply and installation of an outdoor light fixture with a power consumption of 18W and dimensions of 200 x 108 mm. It should utilize an E27 LED holder for versatile bulb options.Constructed from durable aluminium and polycarbonate (PC), the fixture with a modern black finish. With a Color Rendering Index (CRI) of 80, it ensures accurate color representation The fixture should have an IP68 rating, providing complete protection against dust and water immersion, making it ideal for outdoor use. Installation will follow the directives of the Engineer in Charge.
12
12359
148308
... More
069 - Supply and installation of a facade light with a power consumption of 12W and dimensions of 145 x 180 mm. It will feature Bridgelux LED chips for reliable performance.Constructed from 304 stainless steel with a silver finish, the fixture will have a CRI of 80 and a CCT of 3000K for warm white illumination. The beam angle will be 10, producing a luminous flux of 80 lm/W.With an IP68 rating, the light will be fully dustproof and waterproof, suitable for outdoor use. Operating at 24V, this facade light will provide effective architectural lighting solutions. Installation will follow the directives of the Engineer in Charge.
35
16350
572250
... More
070 - supply and installation of high quality long through multi color wash light, Protection Rating :IP66, complying to BIS standard "IS 10322 (Part 5/Sec 1): 2012" and having CE certification against standard Low Voltage Directive & Protective Equipment - EN 60598-1 2015 , and "Electromagnetic Compatibility Directive EN 61547 2009, Mounting Structure : Adjustable surface mount yoke arrangements forfixing the lights having the rotation degrees embosed in the die cast. Power consumption : 150W, CCT : RGBW(6000-7000K), (as per the design approval), Optics : PMMA with holder, Beam Angle : 25/45/60, Control : DmX512Channel : 4 CH, Body : Die casted / extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution : Optics Designed to minimize hotspots & fringing in color mixing applications. Power Input : AC - 110 - 230V,Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tank processedtreatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0 C to 50 C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per ISstandard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP67 connector having thelength 300mm.Execute the work as directed by engineer incharge.
35
42250
1478750
... More
071 - supply and installation of high quality long through multi color Linear wash light, Protection Rating : IP66, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012 and having CE certification against standard Low Voltage Directive & Protective Equipment - EN 60598-1:2015, and Electromagnetic Compatibility Directive -EN 61547: 2009, Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights. Power consumption : 50W, CCT :RGBW(6000-7000K), (as per the design approval), Optics : PMMA with holder, Beam Angle : 25º/45º/60º, Control : DmX512 Channel : 4 CH, Body : Die casted extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : AC - 110 - 230V, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glass having the IK protection up to IK07, Painting : Chemical 3/7 tank processed treatment before thepowder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0C to 50C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate &prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade. Luminaire is inclusive of Integral male/female waterproofconnectors with structures in pre wired conditions as per IS standard. PCBthickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratoryapproval. Power & DMX Loop In/Out along with IP67 connector having thelength 300mm.
35
19200
672000
... More
072 - supply and installation of high quality long through multi color wash light, Protection Rating :IP66, complying to BIS standard IS 10322 (Part 5/Sec 1): 2012 and having CE certification against standard Low Voltage Directive & Protective Equipment - EN 60598-1:2015, and Electromagnetic Compatibility Directive - EN 61547:2009, Mounting Structure : Adjustable surface mount yoke arrangements for fixing the lights having the rotation degrees embosed in the die cast. Power consumption : 100W, CCT : RGBW(6000-7000K), (as per the design approval), Optics : PMMA with holder, Beam Angle : 25/45/60, Control : DmX512 Channel : 4 CH, Body : Die casted / extruded aluminium with embossed manufacturer logo, Seperate compartment for keeping the decoder/driver in the housing which can be easily removable for service without disturbing the LEDs/Optics, Hot spot and light distribution : Optics Designed to minimize hot spots & fringing in color mixing applications. Power Input : AC - 110 - 230V, Surge Protection : Inbuilt surge protection in the driver 2KV-4KV(Additional if required will be added as per the requirement), Toughened transparent glasshaving the IK protection up to IK07, Painting : Chemical 3/7 tank processed treatment before the powder coat black/ash/approved color coat. Fixture will be suitable to operate in a temperature range of 0 C to 50C, The light fixtures are having IP68 air vent made of stainless steel which helps to desiccate & prevent from forming moisture inside the light fixture at worst environmental condition. LED life should be at least 50,000 burning hours at L70 at 35 degree centigrade.Luminaire is inclusive of Integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. PCB thickness must be 1.6mm, 35 micron Copper, 2W TC with Black or White masking, Copper /OSP finish. LM79, IK07, IP66, HV Certificates from NABL Acrediated laboratory. LED Makes should be CREE, LumilLED, Osram, Seoul, Nichia or equivalent with the engineer or 3rd party testing laboratory approval. Power & DMX Loop In/Out along with IP67 connector having the length 300mm.and execute the work as per the direction of engineer incharge
18
35552
639936
... More
073 - supply and installation of high quality Multi Color Neon Flexible light, Protection Rating : IP65, Mounting Structure : Adjustable wall mount SS clips for fixing the lights. Power consumption : 12W, CCT : RGB/RGBW, (as per the design approval) Beam Angle : 120, Control : DmX512 Channel : 4 CH, Power Input : DC 24V,Surge Protection : Inbuilt surge protection 2KV-4KV(Additional if required will be added as per the requirement), Fixture will be suitable to operate in a temperature range of 0C to 50C , LED life time should be at least 50,000 burning hours at L70 at 25 degree centigrade. Luminaire is inclusive of integral male/female waterproof connectors with structures in pre wired conditions as per IS standard. LED Makes should be CREE, LumilLED, Osram, Seoul, Epistar, Nichia or equivalent and supply and installation of Aluminium Profile for Neon flex with the engineer or 3rd party testinglaboratory approval.
90
3819
343710
... More
074 - supply and installation of High quality Decorative 40W Post Top Light, Height: 3Mtr, Material: G.Iron, Top Dia: 76mm, Bottom Dia: 114mm, Protection Rating : IP65, Input power : AC 110 - 230V, 50Hz.execucute the work as directed by engineer incharge.
4
59472
237888
... More
075 - supply and installation of DC power driver for the Lights, Power : 200W, Input : AC 110-240V AC, 50Hz, Output : DC 12/24V, Protection rating, IP67, Surge protection: LL 4KV, LE 6KV.execucute the work as directed by engineer incharge.
14
6493
90902
... More
076 - supply and installation of high quality DMX decoder, Power Input : DC 24V, Protection rating : IP65.execucute the work as directed by engineer incharge.
14
14152
198128
... More
077 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. 5C x 2.5 mm2.execucute the work as directed by engineer incharge.
600
266
159600
... More
078 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 1.5 mm2.execucute the work as directed by engineer incharge.
500
72
36000
... More
079 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990.3C x 4 mm2.execucute the work as directed by engineer incharge.
500
172
86000
... More
080 - supply and installation of 5 core DMX cable comprises twisted pairs with shield support for carrying of data. DMX512 cable is used for connecting all light consoles that use DMX 512 standard data transmission. (As per actuals depending upon the site condition).execucute the work as directed by engineer incharge.
600
362
217200
... More
081 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990. 4C x 2.5 mm2.execucute the work as directed by engineer incharge.
200
148
29600
... More
082 - supply and installation of (including excavation of suitable width & depth up to 90 cm) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete for both power andDmx. (As per actuals depending upon the site condition).execucute the work as directed by engineer incharge.
200
623
124600
... More
083 - supply and installation of IP65 "I" power connectors having 3/4 pole cable connector, chuck type strain relief, Current rating 20 A rms continuous, Easy and extremely precise locking system "Quick Lock" High impact materials - long-lasting and reliab).execucute the work as directed by engineer incharge.
90
1314
118260
... More
084 - SITC of IP65 "I" DMX connectors having 3/5 pole cable connector, Male/Female connector with improved latch, cage type contacts, "solder stop" for easy soldering, and additional ground contact for best contact integrity betweenchassis and cable connector. More durable housing for maximum reliability.execucute the work as directed by engineer incharge.
90
1529
137610
... More
085 - supply and installation of DMX signal amplifier for improving/amplifiying the input signals through longer distances.execucute the work as directed by engineer incharge.
4
29736
118944
... More
086 - supply and installation of Power Distribution Board made up of MS Sheet metal fabricated housing black powder coated and ivery connectors for the internal terminations and external outgoing connecting points, fibre / brass glands of suitable size fitted MCB control for outgoing circuits. - 9 Nos of 6/10A SP Outgoing MCB's. - 1No of 16A TPN Incoming MCB.execucute the work as directed by engineer incharge.
2
33183
66366
... More
087 - supply and installation of IP driver box made up of PVC / UPVC for the internal terminations and external outgoing connecting points, with required PVC / brass glands, Optional suitable size MCB fitted for control outgoing circuits.execucute the work as directed by engineer incharge.
2
33183
66366
... More
088 - supply and installation of Din Rail Mount DMX controller can be used to control a wide variety of different DMX systems- from RGB/RGBW to more advanced moving and color mixing luminaires, 512 DmX channels in live mode (computer), stand alone mode with 1 area and 20 scenes, Mac OSx 10.6/10.7/10.8 - WindowsXP/VISTA/SEVEN/8 32/64 bits and USB 2.0, XLR3, mini USB, Power From 5V to 5.5V DC (AC/DC adapter in option.execucute the work as directed by engineer incharge.
2
151984
303968
... More
089 - 1) Supply and installation of 50 single jet nozzles for the water fountain surrounding the clock tower, in accordance with the approved architectural water fountain layout. The nozzles will be made of brass, featuring a 1-inch input bore and a 12 mm orifice. These nozzles will be securely installed onto stainless steel pipes with appropriate threading.
2) Supply and installation of 50 18W RGB LED underwater lights, each mounted on stainless steel holders of suitable height, is required. All LED underwater lights must have an IP68 rating to ensure water resistance and durability. The power supply will be provided through 4-core, 2.5 Sqmm cables of suitable length. A DMX controller, supporting the DMX-512 protocol and compatible with the voltage of the lights, will be installed to manage the lighting effects. The installation of the LED lights will follow the approved architectural water fountain layout.
3) Supply and installation of two 440V, 3-phase, 7.5 HP Kirloskar pumps will be installed along with all necessary accessories, including power supply cables, 3-phase starters, and bedding material. Galvanized iron (GI) pipes of suitable diameter will be installed to ensure a continuous water supply to the fountain and to drain excess water, as detailed in the architectural layout. 4) ) Supply and installation of Water Filtration Unit with a flow rate of 500 to 1000 liters per hour (LPH).execucute the work as directed by engineer incharge.
1
955000
955000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%