Bruhat Bengaluru Mahanagara Palike Tender

E04 - Supply and fixing of 3 pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts,nuts,washers and wiring etc., complete with AC-3 Rating and as per IS-13947.5.13.4)100 A KPWD ELE SR 2023-24 VOL-06

E05 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 5.7.2)32 A KPWD ELE SR 2023-24 VOL-06

E06 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers . KPWD ELE SR 2023-24 VOL-06

E07 - Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.32.05)16 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm) BESCOM SR 2023-24

E08 - Supply of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975.32.08)25 Sqmm, 4 Core, (13 GI Strips - 4 x 0.8 mm)) BESCOM SR 2023-24

E09 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 21.05)2.5 to 25 Sqmm BESCOM SR 2023-24

E10 - Earth work excavation for pipelines/cables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usage& other appurtenances required to complete the work.1.6.1) In all kinds of soils. Depth upto 1.50m KPWD CIVIL SR 2023-24 VOL-01

E11 - Supply of 1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995 42.07)3x25 + 1x25 + 1x16 Sqmm Street light (Insulated Messenger cum Neutral) BESCOM SR 2023-24.

E12 - Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x25) (Street Light Control) BESCOM SR 2023-24

E13 - Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs50000hr @ Lumen Maintenance of 70 percent, maximum light intensity should be between 60degrees to 70degrees. CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. PowerFactor 0.9with mains, Surge Protection-Min 5KV along with Overvoltage /Overload, shortcircuit / miss-wiring protection. Compatible for pole mounting with outerdia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application.CompliancetoIS10322/IEC60598,LM79&LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with........W System Powerconsumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier wordmark / name shall be Engraved / Embossing on the die cast housing/ Bodypart. Warranty of 2 Years against any manufacturing defect working understandard electrical conditions as mentioned above should be given by LED manufactrer &Cree / Nichia / Lumileds / Osram make LED Source. 11.8.4)LED Streetlight 90 W KPWD ELE SR 2023-24, VOL-06

E14 - Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70 percent, CCT 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminaire manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/. 11.9.4)LED Floodlight 150W KPWD ELE SR 2023-24 VOL-06

E15 - Supplying and Fixing of........mm dia class A GI pipe bracket upto 2ms long bent at suitable angle and fixing to this bracket street lightfitting of all capacities to GI or GI or rail or RCC pole / wall using suitable clamps,bolts,and nuts and wiring using suitable capacity wires. 13.1.2)Using 32mm dia G.I.Pipe KPWD ELE SR 2023-24, VOL-06

E16 - Fixing halogen / metal halide /SVL /IL /LED flood light fitting over existing pole/ wall ceiling including clamps,bolts,nuts and wiring using suitable capacity wires. KPWD ELE SR 2023-24, VOL-06

E17 - Supply of 1.1 kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wires as per IS-694: 2010. 48.01) PVC Wire - 2.5 SqmmWeight per 100 Mtr Coil: 1.8 Kg BESCOM SR 2023-24

E18 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. h. All other type of structures KPWD CIVIL SR 2023-24, VOL-01

E19 - Providing and laying in Reinforced cement concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately2.3.1)M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates KPWD CIVIL SR 2023-24, VOL-01

E20 - Supplying,fixing,wiring,earthelectrodeforgroundingconduits,I.C.cutoutsandotherequipment'sonthemeterboardusing40mmdia2.90mmthickGIpipe2.5mlongburiedinapit.Thepitshouldbefilledwithequalproportionofsaltandcharcoal150mmall-round the pipe to complete depth. The connection from the pipe to the conduitetc.,istobeestablishedthroughGIwireofsizeasperlSIspecification7.3.3.ofIS732using12mmdiabolts,nuts,washersandchecknutsetc., the pipe shall have 16 through holes of 12 mm dia. KPWD ELE SR 2023-24 VOL-06