Bruhat Bengaluru Mahanagara Palike Tender

code04 - Providing, laying & fixing cement base, precast, pre polished cement concrete, designer tiles 25mm thick conforming to IS 1237 heavy duty tiles for flooring, treads of steps and landing, laid on a bed of 12mm thick cement mortar 1:3 mis finished with flush pointing using white cement, including cost of materials, mortar, including cutting, griding the edge to half/full round wherever required, labour, curing complete as per specification.

code05 - Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top width 100mm and bottom width 150 respectively, 300mm high with CM 1:3 plastering and finishing cutting, including form work, curing, including cost of all materials, labour, hire charges of machinery, loading, unloading, lead and lift, transportation etc., complete to be laid betwwen travel lane and Cycle Track/ Landscape with all lead, Lift, Loading and unloading complete as per the direction of Engineer in Charge ( form finish concrete and no painting to be done) Data Rate

code06 - Providing and Fixing Polished Grey Granite Slab Benches in Charge of the Work

code07 - Supply and Fixing of Arm and Pedal Bike: All products must test and certified to meet EN16630 safety standards with GS text mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC. or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid, Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety Each certificates. Horizontal Structural post of length 1.10 m supporting Upright structural posts of helght 1.23 m and Dia 60mm Is to be schedule HOT DIP Galvanized steel with a 114mm 0.D. and 2.2mm (wall) thickness of the tubing. Pedals of size 108 mm & Bars of size 197 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause Injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery. 1 completely pre- assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. The rates are inclusive of all taxes, transportation charges and Installation. EQUIPMENT DIMENSIONS: 1.43 mx 0.65 mx 1.23 m User capacity: 1 Person

code08 - Supply and Fixing of Bicycle: All products must test and certified to meet EN16630 safety standards with G5 test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS anly, The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been Installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during Each technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.31 m is to be schedule HOT DIP Galvanized steel with a 60 mm O.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Pedal of size 113mm x 40mm & Rotating Disc of Dia 380 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Welded. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have bullt in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. The rates are inclusive of all taxes, transportation charges and Installation. EQUIPMENT 2 DIMENSIONS: 1.11m x 0.51 mx 1.31 m User capacity: 1 Person

code09 - Supply and Fixing of Big Shoulder Wheel: All products must test and certified to meet EN16630 safety standards with GS test mark The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through thele authorized dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark cerificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification i mandatory during technical bld. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 1.47 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. Circular Handrail of Dia 0.69 m and Dia 42 mm fabricated from 420.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause Injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance; Maintain according to EN16630 and the maintenance guide. The rates are Inclusive of all taxes, transportation charges and Installation. EQUIPMENT DIMENSIONS: 0.69 mx0.61 mx 1.94 m User capacity: 2 People

code10 - Supply and Fixing of Elliptical Cross Trainer: All products must test and certified to meet EN16630 safety standards with GS test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the Installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during equipment the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety Each certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm 0.D. and 2.2mm (wall) thickness of the tubing. Two numbers of Foot rest of size 320 mm x 132 mm are attached to the Standing Bars 998 mm x 40 mm fabricated from 40 O.D. galvanized steel pipes. Lower part of Support Handrails of size 0.8 m high and Dia 47 mm and Upper part of Support Handrails of size 0.51 m high and Dia 32 mm fabricated from 47 mm O.D. and 32 mm 0.0. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN16530 and the maintenance guide. The rates are Inclusive of all taxes, transportation charges and Installation. EQUIPMENT DIMENSIONS: 1.02 mx 0.53 mx 1.52 mUser capacity: 1 Person

code11 - Supply and Fixing of Leg Stretch: All products must test and certified to meet EN16630 safety standards with GS test mark The 16630 certificates must be issued by a reputed natifled International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been Installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the Installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid 5 and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during Each technical bid. All products must clearly display the GS mark as has been issued in the EN16530 safety certificates. Upright structural posts of height 1.10 m is to be schedule HOT DIP Galvanized steel with a 114mm 0.D. and 2.2mm (wall) thickness of the tubing. Handrail rails of Dia 32 m. The poles are welded on to a base plate made from steel with 114mm inner diameter Welded Welded, Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters miters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery. 1 completely pre- assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. The rates are inclusive of all taxes, transportation charges and Installation. EQUIPMENT DIMENSIONS: 0.93 mx 0.81 mx 1.13m User capacity: 3 People

code12 - Supply and Fixing of Pull Down Challenger:All products must test and certified to meet EN16630 safety standards with GS upply and Fixing of t test mark. The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves through their authorized dealers or dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification Is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety Supply certificates. Upright structural posts of height 1.88 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Pull down Bars 806 mm x 700 mm and Dia 40 mm are spaced at 630 mm fabricated from 40 0.0. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter, Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built In safety limiters that prevent unwanted and excessive movement, which can cause Injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. The rates are Inclusive of all taxes, transportation charges and Installation. EQUIPMENT DIMENSIONS: 2.30 m x 0.70 mx 1.28 m User capacity: 2 People

code13 - Supply and Fixing of Seated Chest Press: All products must test and certified to meet EN16630 safety standards with GS test mare EN16630 certificates must be issued by a reputed notified International Cerofying Body such as IPEMA, TUV, CPSC or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority er a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at the the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification Each mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16610 safety certificates. Upright structural posts of height 1.83 m is to be schedule HOT DIP Galvanized steel with a 156mm OD and 2.2mm (wall) thickness of the tubing. Two pair of U-Shaped Bars of 1.02 m and Dia 40 mm while the handles are placed at a spacing of 693 mm fabricated from 40 0.0. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms, Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance Maintain according to EN16630 and the maintenance guide. The rates are inclusive of all taxes, transportation charges and installation EQUIPMENT DIMENSIONS: 1.82 mx 0.69 mx 1.88 m User capacity: 2 People

code14 - Supply and Fixing of Rider: All products must test and certified to meet EN16630 safety standards with GS test mark, The a EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been Installed In at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during Each technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.5 m is to be schedule HOT DIP Galvanized steel with a 114mm 0.D. and 2.2mm (wall) thickness of the tubing. A single seat of size 330 mm x 250 mm fixed to the top of the vertical post and two Pedals & Bars of size 145 mm 50 mm and Dia 38 mm fabricated from 40 0.0. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The Umiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. The rates are inclusive of all taxes, transportation charges and Installation. EQUIPMENT DIMENSIONS:

code15 - Supply and Fixing of Squat Pushing: Pushing: All products must test and certified The EN16630 certificates must be issued by a o meet EN16630 safety standards with GS test mark. ya reputed notified International Certifying Body such IPEMA, TUV, CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves through their authorized dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by It to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during 12 technical bid. All products must clearly display the GS mark as has been issued In the EN16630 safety certificates. Vertical bars height of 1.70 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and 2.2mm (wall) thickness of the tubing. L shaped bars of 960 mm x 600 mm carrying two seats of 0.34 m x 0.34 m fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm Inner diameter. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. The rates are Inclusive of all taxes, transportation charges and installation. EQUIPMENT DIMENSIONS: 1.93 mx 0.56 m x 1.70 Each 1 m User capacity: 2 People

code16 - Supply and Fixing of Self Weighted Rower. All products must test and certified to meet EN16630 safety standards with GS test erk. The EN16630 certificates must be issued by a reputed notified international Certifying Body such as IPEMA, TUV CPSC, or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the Installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must must clearly display the GS mark as has been issued in the EN16630 safety certificates. Horizontal bars of length 1.26 m is to be schedule HOT DIP Galvanized steel with a 60mm 0.0, and 2.2mm (wall) 1:26 thickness of the tubing. Handle Bars of 0.74 m and Dia 38 mm fabricated from 40 O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery. 1 completely pre assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. The rates are inclusive of all taxes, transportation charges and installation. EQUIPMENT DIMENSIONS: 1.26 m x 0.80 mx 1.59 m

code17 - Supply and Fixing of Sit Up Station: All products must tested and certified to meet EN16630 safety standards with G5 test mark the EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC. or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during 11 the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification is Each 1 mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates. Upright structural posts of height 0.63 m is to be schedule HOT DIP Galvanized steel with a 114mm 0.0. and 2.2mm (wall) thickness of the tubing. Two J shaped Bars of 1.07 and Dia 48 mm. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre-assembled equipment modules. Maintenance: Maintain according to EN16630 and the maintenance guide. The rates are inclusive of all taxes. transportation charges and Installation. EQUIPMENT DIMENSIONS: 1.48 mx 1.21 mx 0.63 m User capacity: 2 People

code18 - Supply and Fixing of Double Air Skler: All products must test and certified to meet EN16630 safety standards with GS test mark The EN16630 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC or SGS only. The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their authorized dealers or contractors. The suppliers products must have been installed in at least 200 public parks across India the list of which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a third party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at site, the evaluation report to have photographs of the Installed products taken at site showing the GS mark and the condition of the equipment, based upon which the tender shall be evaluated. The EN16530 & GS Mark certificates must be submitted during the technical bid and the same must reflect clearly on the notified certifying bodies websites as online verification mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety 16 certificates. Upright structural posts of height 1.25 m is to be schedule HOT DIP Galvanized steel with a 114mm O.D. and m sched 2.2mm (wall) thickness of the tubing. Foot rest of size 365 mm x 164 mm and Standing Bars of length 1640 mm 40 mm fabricated from 0.0.0. galvanized steel pipes. Lower part of Support Handrails of size 0.8 m high and Dia 4 mm and Upper part of Support Handrails of size 0.51 m high and Dia 32 mm fabricated from 47 mm 0.0, and 32 mm 0.0. The poles are welded on to a base plate made from steel with 114mm Inner diameter. An Internal limiter prevents the equipment from moving uncontrollably. Bearings: Maintenance-free sealed ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause Injuries. The limiters must be in accordance with EN16630 safety norms. Scope of delivery: 1 completely pre- assembled equipment modules. Maintenance Maintain according to EN16630 and the maintenance guide. The rates are Inclusive of all taxes, transportation charges and installation. EQUIPMENT DIMENSIONS: 1.61 mx 0.50 m x 1.50 m User capacity: 2 People

code19 - Supply and Fixing of Mini Ski: All products must test and certified to meet EN16630 safety standards with GS test mark. The ificates must be issued by a reputed natified International Certifying Body such as PEMA, TUV, CPSC S anly The GS mark-EN 16630 certificates must be in the name of the supplier by themselves or through their auth dealers or contractors. The suppliers products must have been installed in at least 200 public parks scross India the to which to be submitted during the technical bid. Any five parks will be randomly selected by the tendering authority or a th party appointed by it to check and ascertain the product GS Marks, safety, quality and durability at ute, the evaluation report to have photographs of the installed products taken at site showing the GS mark and the condition of the equipment based upon which the tender shall be evaluated. The EN16630 & GS Mark certificates must be submitted during the technical and the same must reflect dearly on the notified certifying bodies websites as online verification is mandatory during technical bid. All products must clearly display the GS mark as has been issued in the EN16630 safety certificates structural posts of height 1.40 m is to be schedule HOT DIP Galvanized steel with a 114mm Q.D. and 2.2mm twall) Dickies o the tubing. The Standing Bars 991 mm and Dia 60 mm fabricated from 40 0.0. galvanized steel pipes Upper sart of Supp Handrails of size 1.04 m high and Dia 38 mm fabricated from 40mm 0.0, and 32 mm O.D. galvanized steel pipes. The poles are welded on to a base plate made from steel with 114mm inner diameter. An internal limiter prevents the equipment from moving uncontrollably, Bearings: Maintenance-free ball bearings. Equipment which have sway and moving parts, must have built in safety limiters that prevent unwanted and excessive movement, which can cause injuries. The limiters must be accordance with EN16630 safety norms. Scope of delivery: 1 completely pre-assembled equipment modules. Maintenance Maintain according to EN16630 and the maintenance guide. The rates are indusive of all taxes, transportation charges and Installation.EQUIPMENT DIMENSIONS: 1.07 mx 0.78 mx 1.40 m User capacity: 2 People 15