Bruhat Bengaluru Mahanagara Palike Tender

code04 - KSRB 9.5-2 : Providing and fixing in position fully paneled Honne wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machinery complete as per specifications. ( excluding cost of fixtures) Specification No. KBS 9.34 . (P.No. 100, I.No. 12.15)

code05 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colour such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with Grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (P.60 / It.no 9.9 Vol-2)

code06 - Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colour & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with Grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm (P.No. 61, I.No. 9.17.2 Vol-2)

code07 - Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests (P.No. 131, I.No. 14.1.1 Vol-2)

code08 - Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid(P.No. 131, I.No. 14.2.1 Vol-2)

code09 - Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern (P.No. 131, I.No. 14.4.1 Vol-2)

code10 - Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required: using White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (P.No. 133, I.No. 14.7A Vol-2)

code11 - Providing and fixing Pillar Cock made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium (P.No. 138, I.No. 14.48B Vol-2)

code12 - Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium (P.No. 139, I.No. 14.52B Vol-2)

code13 - Providing and fixing Bib cock with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Premium (P.No. 139, I.No. 14.55B Vol-2)

code14 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 32 mm nominal dia Pipes ( P.no 122 I.no 13.31.4 Vol-2)

code15 - PVC pipe - OD 160mm and 6 Kg/sqcm (P.No.A-44/ Sl.No. 649 Vol-5)

code16 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 mm2 (P.No.5-Sl.No 2.3.2) & of KPWD electrical SR 23-24 Vol- 6.

code17 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 2.5 mm2 (P.No.5-Sl.No 2.3.3) & of KPWD electrical SR 23-24 Vol- 6.

code18 - Supplying 6A flush type socket and 6 A flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3854 6A 2 Way (P.No.8-Sl.No 3.1.1) & of KPWD electrical SR 23-24 Vol- 6.

code19 - 6A Three Way socket (P.No.9-Sl.No 3.6.3) & of KPWD electrical SR 23-24 Vol- 6.

code20 - 32A DP Switch (P.No.9-Sl.No 3.6.9) & of KPWD electrical SR 23-24 Vol- 6.

code21 - Electronic stepped regulator. (P.No.10-Sl.No 3.14.16) & of KPWD electrical SR 23-24 Vol- 6.

code22 - 6A Batten Holder (P.No.10-Sl.No 3.14.7) & of KPWD electrical SR 23-24 Vol- 6.

code23 - Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 10" x 8" x 1.5" (P.No.14-Sl.No 5.6.2) & of KPWD electrical SR 23-24 Vol- 6.

code24 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.16 A (P.No.14-Sl.No 5.7.1) & of KPWD electrical SR 23-24 Vol- 6.

code25 - Supplying and fixing regular MCB distribution boards on wall/pod board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase/3 phase/single door with powder coated painting Made out of 14 SWG MS enclosure. 4 Way SP & N(P.No.18-Sl.No 5.19.1) & of KPWD electrical SR 23-24 Vol- 6.

code26 - Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours 70 lumen maintenance with CRI 80. Power Input: 220-240V 50/60Hz Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fitting 1 x 4' - 20/22 W (P.No.43-Sl.No 11.3.2) & of KPWD electrical SR 23-24 Vol- 6.

code27 - Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball bearing system. 48" Sweep (1200 mm) Regular model (P.No.30-Sl.No 6.3.1) & of KPWD electrical SR 23-24 Vol- 6.

code28 - Supplying wall mounting fan suitable to operate at single- phase 230v AC. supply. 300 mm Sweep (P.No.30-Sl.No 6.5.1) & of KPWD electrical SR 23-24 Vol- 6.

code29 - Supplying exhaust fan of 1440 RPM of 300 mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz, AC Supply (P.No.30-Sl.No 6.1) & of KPWD electrical SR 23-24 Vol- 6.

code30 - Fabricating, supplying and erecting Waged tubular Pole of height ...m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. base plate of suitable size welded at the bottom of the Pole(as per IS) and 40 mm dia GI/flexible PVC pipe of 1m length fitted to the heavy gauge polycarbonate control box including 5 Way connector of size 167 x 125 x 82 mm for 7.5M Pole/ 200 x 160 x 98 mm for remaining length of Pole with front opening cover, with locking arrangements and suitable capacity MCB/DP switch, The Pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the Pole to the ground level and the coping CC shall be upto 0.6m above ground level as per IS2713-7. Erection of heavy duty Pole on Footpath/median 9m (5m H,165.1 mm dia 4.85 mm thick x 2m HM, 139.7 mm dia 4.50 mm thick x 2m Ht,114.3 mm dia 3.65 mm thick) as per IS 410 SP 32 (PWD Electrical SR 2023-24, P.No.11, I.No.4.1.1 Vol-6)

code31 - Supply of LED floodlight luminance with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection molded polycarbonate/clear glass material, delivering superior light output Rated life Burning Hrs 50000 hr Lumen Maintenance of 70, CCT 5500K, IP 66 optical and electrical compartment impact resistance of complete luminance IK08. Power Factor 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mauling with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100 V to 270V 50/60Hz application. Compliance to IS 10322/ IEC 60598, LM 79 LM 80 Adherence with R Ohs. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ....... W System Power consumption. LED Efficiency 1301m/w, nominal CRI 75. Luminance manufacturer should have in- house facility accredited by NABL / CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark / name shall be Engraved / Embossing on the die cast housing / Body part Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichiren/ LED Floodlight 150W (PWD Electrical SR 2023-24, P.No.46, I.No.11.9.4 Vol-6)

code32 - Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incharge of work and latest amendments etc.complete, 2.00 HP/1.5KW 6 STG (P.No.150-Sl.No 13.8.1) of Water supply & sewage works 2023-24, Vol-5

code33 - Hiring Charges Tipper-5.5 m3 etc complete as per specification and direction of engineer incharge of the work (P.No.A-47 Sl No.126 of PWD SR 23-24 Vol-1)

code34 - Hiring of Backhoe-loader 1 m3 bucket capacity, with all lead and lift etc complete as per specification and direction of engineer incharge of the work (P.No.A-42 Sl No.4 of PWD SR 23-24 Vol-1)

code35 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) including cost of materials, labour, usage charges of machinery complete as per specifications. (P.No.88, I.No. 11.35.2.2) Volume-2

code36 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge: Pre-laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (P.No.89, I.No. 11.36.2) Volume-2

code37 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kg/m²) including cost of materials, labour, usage charges of machinery complete as per specifications. (P.No.89, I.No. 11.37.2) Volume-2

code38 - Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. ** Polished Granite stone slab Black, Cherry Red, Brown, Cat Eye, River Pink or equivalent.(P.No.63, I.No. 9.24) Volume-2

code39 - Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(P.No.82, I.No. 11.15.2) Volume-2

code40 - Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510 mm bowl depth 200 mm(P.No.134, I.No. 14.10.2.1) Volume-2

code41 - Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead(P.No.17, I.No. 3.5) Volume-3

code42 - Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting & stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools, usage of machinery & other appurtenances required to complete the work. In all kinds of soils upto 300 mm depth (P.No.8- I.No.1.12) & of PWD SR 23-24 Vol-1

code43 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:4:8 (M 7.5) Using 40 mm nominal size graded crushed coarse aggregates (P.No. 15, Sl.No. 2.1.2, Vol-1, 2023-24)

code44 - Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383:2016:, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, creed and plate vibrators and finished in continuous operation including construction joints, primer, sealant, curing of concrete slabs for 14-days, and water finishing to lines and grade as per drawing and technical specification clause 1501 with all lead, lifts, loading & unloading charges, cost and conveyance of all materials, labour, equipments etc., complete. as per the directions of the Engineer-in-charge of the work. (P.No.149- I.No.16.28) & of PWD SR 23-24 Vol-3

code45 - Loading and Unloading of Stone Boulder/Stone aggregates/Sand/Kankar/Moorum.(Tipper 5.5 m3) (V-III Page No.5, Item No.1.1 A, SR 2023-24)

code46 - Engaging Unskilled Heavy work with all lead and lift etc., complete as per specification and direction of engineer incharge of the work (P.No.A-50 Sl No.IV of PWD SR 23-24 Vol-1)

code47 - Supply and instalations of IP66, 60 watts LED Solar street light with 5 Mtrs long MS pole as detailed specfication Housing ABS Anti-UV Plastic Housing with lence or reflector should not be lessthan 640 x250x 70mm,Solar Panel 6V 15W High-efficiency polysilicon (Coversion rate 13) tempered glass laminated,Battery Lithium iron phosphate battery (15Ah / 3.2V)Over Charge Protection Deep Discharge protecton LED Chip 4000-4600lm BEAM Angle 120 Control panel Get dark will turn on, under sunshine will charge energy,5 Mtr Mild Steel Pole of dimension Bottom 2mtr Length 76mm OD and Top 3mtr 60mm OD With 3mm thickness,1mtr 42mm OD Single arm 15 deg welded or bracket to the pole. Base Plate size 220 mm x 220 mm welded at the bottom of the pole Painted with two coats of anticorrosive red oxide and Graffite Grey . suitable for Solar Street Light, includes digging of 1 mtr length and 0.30 mtr dia,1:2:4 bottom concret and 0.30 mtrs above ground level coping complete. Data Rate