Bruhat Bengaluru Mahanagara Palike Tender

code04 - Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates with Centering.

code05 - Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification

code06 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

code07 - Providing and fixing RCC precast cover slab of 10 cm thick for drain in cement concrete M20 using graded granite jelly 20mm and down size with steel reinforcement, including formwork, lift charges, curing and concrete finished surfaces on both sides etc., complete as per drawing and directions of engineer-in-charge.

code08 - Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165 mm respectively 400 mm high and 450 mm in length finished with CM 1:3 plastering and finishing Cutting including form work curing, including cost Materials, labour charges of Machinery, Loading and unloding, lead and lift, transportation ete., comlete as directed by the engineer in charge of the work

code09 - Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

code10 - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

code11 - Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

code12 - Providing and fixing plain sadarahalli granite benches of of 4ft length and 1ft width with side arm support of 18" height with all lead and lift and loading as per the direction of in charge of work including all taxes

code13 - Cost Of Haulage Excluding Loading and unloading of stone Boulder /Stone Aggregates/ sand/ Kanakar /Moorum.(Tipper 10m3) (Tacking output 18 t load and lead 10km)lead For 20km t.km

code14 - Supply and Fixing of Puppy/Elephant/Horse/Bike Rider: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV,CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. HDPE of size 0.83 m x 0.31 m

code15 - Supply and Fixing of 2 Seater See Saw: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the center which is of size 3110 mm length and Dia 114 mm. It consists of 2 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. The rates are inclusive of all taxes, transportation charges and installation. PLAY EQUIPMENT DIMENSIONS: 3.11 m x 0.44 m x 0.66

code16 - Supply and Fixing of Fiero A Swing: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by.a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name.of a supplierwho: has arried out in excess of at least 100 public park projects in India either by:themselves.or.through their.dealers.orcontractors.These.EN.1176 certificates must be clearly displayed on the notified certifying bodies websites assonline verification is mandatory. Shaped structural posts of height 2.31 m are-to be Each schedule HOT DIP Galvanized steel with a 114mm*OD:and.2:2mm (wall) thickness of the tubing. Plastic Components such as swing seats (super thick plastic) shall be animated and shall be:rotationally molded from antistatic, copolymer, virgin linear antavedensity.UV stabilized polyethylene, with color molded in and minimum thickness of 6 - 8mm. The rates are inclusive of all taxes, transportation charges and installation. PLAY EQUIPMENT DIMENSIONS: 3.21 m x 1.54 m x 2.50 m

code17 - Supply and Fixing of Merry Go Round DX: The Merry go round consists of a round platform which is made of galvanized steel dand has a thickness of 2.5 mm. It is also power coated with the thickness of 2.5 mm. It is of Dia 1210 mm. It has 3 inverted "L" shaped-handrails which is made of Galvanized steeland of dimensions as 474 mmx 815 mm. It has thickness of Dia 32 mm. the 3-handrails-are separated exactly All the 3:handrails are connected to the Centre with the help of a rod which is also made of-Galvanized steel and-of Dia 48mm and height.815 mm.The supplier must have carried out in excess of at least 100 public park projects in india either by themselves or through their dealers or contractors. The rates are inclusive of alf taxes, transportation: charges-and.installation: ALL: COMPONENTS MEET: WITH EN-1176 SAFETY STANDARDS. PLAY EQUIPMENT DIMENSIONS: Dia 1.21

code18 - Supply and Fixing of Hexa Climber: All products must be tested and certified to meet EN 1176 safety standards. The EN 1176 certificates must be issued by a reputed notified International Certifying Body such as IPEMA, TUV, CPSC, or SGS only. The EN 1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in India either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The length of the equipment is 2.45m, the width of the equipment is 2.28m and the height of the equipment is 2.5m. The equipment comprises of 6 numbers of Upright structural Eac posts of height 2.6 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. 6 Top rail Bars Dia 32 mm. Net Climber of size 2.1 m. The poles are welded on to a base plate made from steel with 114mm inner diameter. Bolts, nuts, screws, washers and etc. used for assembly shall be stainless steel 304 of tamper resistant stainless steel. Exposed hardware shall be covered with ultra violet stabilized plastic safety caps as per EN1176 standards as a safety. The rates are inclusive of all taxes, transportation charges and installation. PLAY EQUIPMENT DIMENSIONS: 2.45 m x 2.28 m x 2.6 m

code19 - Supply & fixing of children multi play equipment VIVA (KPS-905A-E-PVC) All products must be tested and certified to meet EN 1176 safety-standards The.EN 1176 certificates must be issued by a reputed notified International Certifying Body such as (PEMA, JUV, CPSG, or SGS.ontysThe-EN:1176 certificates must be in the name of a supplier who has carried out in excess of at least 100 public park projects in india either by themselves or through their dealers or contractors. These EN 1176 certificates must be clearly displayed on the notified certifying bodies websites as online verification is mandatory. The equipment comprises of 4 numbers of Upright structural posts of height 2.2 m and 2 numbers of Upright Structurad post of height 3.0 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Two numbers of Deck of size 1.14 x 1.14m are fabricated from 2mm perforated solid punched steel. Decks are pre pressed, punched, and welded, powder coated to 2.2mm thickness or vinyl plastic coated to a thickness of 4mm. Crab Roof of size 2.7 m x 1.8 m x 0.8 m, Straight Slide of size 2.22 m x 0.82m x 1.50 m, Straight Slide of size 1.72 m x 0.82 m x 1.20 m Snake Ladder Climber of thickness Dia 38 mm, Frisbee Climber, Panels with color molded in and minimum thickness of 6 to 8mm. Exposed hardware shal be covered with ultra violet stabilized plastic safety caps as per EN1176 standards as a safety feature against protruding hardware. The rates are inclusive of all taxes, transportation charges and installation. PLAY EQUIPMENT DIMENSIONS: 5.53 mx 3.56 m x 3.60