Bruhat Bengaluru Mahanagara Palike Tender

code04 - Material components a)Soap powder

code05 - Mop Stic- alluminium

code06 - Plastic Mug

code07 - Coconut Broom stic

code08 - Plastic buckets 20 L capacity

code09 - Coir Brush

code10 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.6-32Amps SP

code11 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.50-63Amps TPN

code12 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS:8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100Volts as per IS-694:1990 4C x 4 Sq.mm

code13 - Supplying and fixing FOUR Pole Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuitwith adjustable thermal magnetic release, Micro processor release shall have Earth Fault as per IS/IEC 60947-2 . (Icu=100% lcs). In 4P MCCB, all Poles should have protection for Short-Cicrcuit/Over Load. For Microprocessor MCCBS Facility for segregating Priority and Non-Priority loads must be available in the MCCB. MCCB shall be provided with double insulation (insulation between front cover and internal power circuits to avoid any accidental contact with live current carrying path with the front cover open).Multi-pole breakers shall be designed to break all the poles simultaneously and they shall have a single mechanism.FOUR Pole 160 A 25 kA

code14 - c)Air Freshner cakes

code15 - d)Room Freshner

code16 - k)Urinal cakes

code17 - l)HCL

code18 - Supply & erection of Smoke exhaust motor 7.5 Hp 3 phase, 50Hz,1500rpm, induction motor ABB make, with table lock pully 180 dia, 2 Nos grove,

code19 - Supply & erection of B-58 belt

code20 - Supplying & fixing of Coil Holding Refractory Bricks suitable for vertical coil insertion system electrical crematorium furnace conforms to IS-2042. The bulk density of the brick will be max of 2.20gm/cm2 and operating temperature of 6500c to 8500c and max temperature of 13000c.The size of the bricks- 115 x 115 x300mm including loading. Unloading and transportation to work site.

code21 - Supplying & fixing of 3.5 KW Heating coils made out of 5.8mm thick APM wire, heating Zone should be 950mm length, End terminal rod SS 304 grade 10mm dia 550mm length suitable for vertical mounting system in electrical furnace including porcelain beeds, spacers supporting rods complete including loading, unloading and transportation to work site.

code22 - Supplying & fixing Body Laying With 70% aluminiumMoulded RefractoryBricks (MCL) suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS-2042 and IS-1528 max working temperature up to 13000c. The bricks-150 x 300 x 600mm including loading, unloading and transportation to work site.

code23 - Supplying of refractory cement FIRECRETE super (25 kg/bag) for casting refractory bricks

code24 - Supplying of refractory cement fine ACC-50 (25 kg/bag) for casting refractory bricks

code25 - Supplying & fixing of Refractory cement white heat K ACC make for casting refractory bricks. 25 kgs bag

code26 - Supplying of Acoustic Set Thermotex LiquidBlinder suitable for casting refractory bricks. 40 kgs bucket

code27 - Supplying & fixing of FIBER blank kit 128 grade suitable for electrical crematorium furnace heat insulation- 7300 x 610 x 25mm

code28 - Supplying & fixing of Refractory Slabs IS-8 high aluminium suitable for electrical crematorium furnace having the required mechanical strength and chemical composition as per IS 2042 and IS-1528, mx working temperature up to 13000c. The size of bricks-100 x 300 x 600mm including loading and unloading, transportation to work site.

code29 - Servicing & cleaning of Scrubber, Tank,Scrubber duct,Exhaust Blower, Exhaust Duct Furnace to Chimny and cleaning of chimny (6 monts once)