Bruhat Bengaluru Mahanagara Palike Tender
... More
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Bruhat Bengaluru Mahanagara Palike - BBMP Tender
Opening Date16 Jan 2021
Closing Date29 Jan 2021
Tender Amount₹ 88,20,509
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
BBMP/2020-21/OW/WORK_INDENT46402Bid Award Id
ViewTender No
BBMP/2020-21/OW/WORK_INDENT46402Tender Authority
Bruhat Bengaluru Mahanagara Palike ViewPurchaser Address
-Website
http://http://bbmp.gov.in/home
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
KSRB 4-1.2 : Providing and laying in position plain cement concrete of Mix 1:3:6 with OPC @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, HOM curing complete as per specifications. Specification No. KBS 4.1, 4.2
5.61
-
30886.64
... More
KSRB 4.2.7 : Providing and laying in position reinforced cement concrete of design Mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70cum and fine aggregtes @ 0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, lintles, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications. Specification No. KBS 4.1, 4.6
22.3
-
142891.71
... More
KSRB 4-6.4 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness , ncluding attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specificaitons. Specification No. KBS 4.6.2
108
-
40983.84
... More
KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specifications for heights more than 3.50m from ground level. Specifications No. KBS 4.6.2 0 to 5 mts
22
-
9328
... More
KSRB 4-6.9 :Providing and removing centering, shuttering, strutting, propping & removal of form work etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications. Specification No. KBS 4.6.2
2.85
-
2280.86
... More
KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 550
2.23
-
153554.81
... More
KSRB15-3 : Providing 15mm thick cement plaster in single coat with cement mortar 1:3 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.
51
-
12650.04
... More
KSRB 15.10.3 Providing white washing to ceiling and / or sloping roof surface in two coats with lime of approved quality, to give an even shade including cost of materials, labour, complete as per specifications.
34.65
-
477.48
... More
KSRB15-6 : Providing floating coat of cement to plastering and finishing smooth, including cost of materials, labour, curing complete as per specifications.
80.52
-
1621.67
... More
Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Area to be considered - (a) 100% for fresh surface (b) Upto 10 % for repainting
115.17
-
9522.26
... More
KSRB 15-15.1 : Providing and applying painting in two coats with plastic emulsion paint with primer of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.
115.17
-
10987.22
... More
Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glazed primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications.
105.49
-
20127.49
... More
KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM complete as per specifications. Specification No. KBS 7.12
87.12
-
8772.98
... More
Pre-painted steel windows / Ventilators & door frames: Supply and fixing of windows and top hung and fixed louered ventilatorsmade of pre-painted steel (base steel as per IS 513 of -0.58mm thick‘D’ quality, galvanized as per IS 277 with zinc of 120 GSM) with apolyester paint, of 12-16 microns thick and back coated with 5-7 micronsthick alkyd backer. Section for outer frame should be 46x52mm, sectionfor shutter should be 46x46mm, section for mullion should be 46x70mm,and section for beading should be 18x25mm and section for louvered ventilator should be 33x57mm the windows hould be pannaled with 5 mm thick plain float glass and 4mm pinhead glass for ventilators with rubber Gasket. The sections are to be cut to length, mitre joined with corner bracket and centre mullions are to be fixed using mullion cap. Handle made of high grade aluminium powder coated and nylon receiver. Corner brackets made of CRCA with Zinc Phosphate. Mullion caps made of glass filled nylon. The above frames should be ixed to the concrete/ masonry will by means of self-expanding screws. Including 10mm square bars with 6” pitch complete finished item of work. Ventilators : Fixed lovers 4’-0” x 3’-0” (1219.2x914.4mm) (Box section) outer frame section size of 33x57mm mullion section.
3.6
-
13287.31
... More
Door Frame – Internal Providing & fixing factory made Galvanized plain steel door frame of profile size 105 x 60 mm single rebate manufactured from galvanized plain steel sheet 1.20 mm thick, conforming to IS: 277. The door frame consists of hinge jamb, lock jamb, head & bottom tie bars, supply in knockdown condition & to be assembled on site by mechanical means with the special miter joint. The bottom tie bar made out of galvanized plain steel sheet 1.60 mm thick pressed angle 20 x 20 mm to be screwed to the door frame. The 3 nos. of SS Butt hinge 100 x 58 x 1.9 mm to be projected welded to the door frame. The necessary stiffeners & mortar guards to be provided for fixing hardware fixtures. The door frame to be powder coated after pre-treatment of the surface. The door frame shall be filled with 1:3:6 cement concrete & to be fixed with adjustable lugs/ hold fasts. Alternatively, dry fixing shall be permitted by using metallic expansion bolt. The rate is including transportation, loading, unloading, HOM etc. but excluding the hardware fixtures. Size 0.75 x 2130 mm
6
-
3033.72
... More
Door Shutters - internal Providing & fixing factory made Galvanized steel door Shutters 32 mm thick manufactured from pre- painted Galvanized plain steel sheet 0.60 mm thick conforming to the IS: 14246. The door shutters consist of two outer skins if steel sheets, lock seam jointed at vertical stile edges, horizontal top & bottom sides to form a double skin fully flush shell. Rigid polyurethane Foam (PUF) of density 40 Kg/M3 shall be filled in the hollow portion of door shutters for structure rigidly & sound insulation. The necessary stiffeners of the Galvanized plain steel sheet of minimum thickness 1.60 mm to be provided for fixing all hardware fixtures. The rate is including transportation, loading, unloading, HOM etc. but excluding the hardware fixtures. Size – 800 x 2035 x 32 mm thick.
1.89
-
4467.58
... More
KSRB 15-18.1 : Applying red lead ready mix priming coat over new steel or other metal surface including preparing the surface after throughly cleaning oil, grease, dirt and other foreign matter, and scoured with wire brushes, fine steel wool, sand papers including cost of materials, labour, complete as per specifications.
1.89
-
82.14
... More
KSRB 15-18.2 : Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications.
1.89
-
190.32
... More
0220Locking Arrangement
1
-
550.85
... More
0178 Handles powder coated 150mm
1
-
50.85
... More
0188 Hinges 5" heavy duty
4
-
125.44
... More
0189 Hold fasts MS
4
-
128.8
... More
0427 Tower bolt 300 mm long
24
-
2440.56
... More
0540 Screws
24
-
81.36
... More
Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 75mm nominal OD pipes
150
-
286200
... More
Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). 100mm nominal OD pipes
150
-
389550
... More
KSRB13-4.2 : Making connection of G.I distribution branch with G.I main of 50 to 85mm and 100 to 150 nominal bore, including cutting and threading the pipes, providing and fixing Tee, nuts, labour for all item of works, testing and HOM complete as per specifications. Specification No.KBS 13.10
25
-
23293.5
... More
KSRB13-6.3-2 : Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 80mm nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.6 / 13.3
10
-
23542.6
... More
KSRB13-6.2-1 : Providing and fixing in position brass stop cock of approved quality 25mm nominal bore including cost of all materials, labour and HOM with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3
10
-
1473.4
... More
KSRB13-8.9 : Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgs/sq.cm working pressure of outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor including cost of all materials, labour charges, HOM and testing complete as per specifications. Specification No.KBS 13.2.15.1 / 13.9 for internal water supply connection. 110mm dia
100
-
47700
... More
Providing and fixing chorinated poly vinyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work).
260
-
119059.2
... More
KSRRB M400-17. Providing, laying, spreading and compacting cushed stone aggregates of granite / trap / basalt to wet mix macadam specifications including pre mixing the material with water at OMC in mechanical mix plant carriage of mixed materials by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per specifications. MORTH Specification No. 406
48.75
-
97562.4
... More
KSRRB M500-6. Providing and applying primer coat with S.S. bitumen emulsion on prepared surface of granular base such as WMM including cleaning of road surface and spraying primer at the rate of 0.60 kg / sqm using mechanical means complete as per specifications. Clause 502 of MORTH V revision
195
-
5787.6
... More
KSRRB M500-17. Providing and laying dense graded bituminous macadam using crushed aggregates of specified grading, premixed with VG30 grade bituminous binder and, transporting the hot mix to work site, laying to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction in all respects complete as per specifications. Clause 505 of MORTH V revision - do - using 40/60 TPH capacity H.M.P. with Mechanical paver Gr-II (50 mm to 75 mm) with 4.5 % VG-30 Bitumen
9.75
-
62475.08
... More
KSRRB M500-19. Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction in all respects complete as per specifications. Clause 507 of MORTH V revision - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (30 mm to 40 mm) with 5.4% VG-30 Bitumen
7.8
-
57371.65
... More
Atalanta suguna CRI KIRLOSKAR and other equipments pumps 10.00 HP/7.5 KV (20 stage) (Pg No. XLI. Sl.no.29) KPWD SR-2018-19
2
-
99910
... More
WATER PROOFING TO CONCRETE SURFACES Using Membrane Technology For raft & retaining wall Providing & applying water proofing to concrete surfaces using high quality polymer-modified bituminous compounds (confirming to ASTM D 5147) reinforced with non woven polyester fabric, weighing 180gm/sqm granular finish 4mm thick by torch on application method confirming to the properties indicated below. It shall be provided after priming the surface using bitumen primer at 0.2 ltr /sqm. Detailed specification & Methodology 1. Membrane thickness 4mm (+ or – 5%) 2. Tensile strength – Longitudinal 790 N/5cm Transverse 730 N/5cm 3. Elongation of Membrane - Longitudinal 65% Transverse 69% 4. Tear Resistance - Longitudinal 180 N Transverse 190 N 5. Lap joint strength - Longitudinal 750 N/5cm Transverse 550 N/5cm 6. Puncture Resistance – Static 1.4 Dynamic 1.3 7. Water absorption - < 0.15% 8. Water permeability - Nil 9. Chemical resistance – Chloride, sulphate and Nitrate The area to be water proofed shall be free from loose aggregate, dust free and in dry condition. Primer must be applied to the surface and allowed to dry prior to application of membrane. The membrane shall be applied within 6 hours after application of primer. The membrane comes in a roll form shall be unrolled and placed in the correct position where it has to be torched. Each layer must over lap the next layer by min 10cm at the adjacent and 15cm at the ends. The heat application through propane gas torch shall be applied on membrane thus causing melting and subsequent adhesion in the surface. The membrane should be properly placed and torched on in staggered position.
615.08
-
280353.46
... More
Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary
750
-
30000
... More
Groove cutting in walls Supplying heavy gauge PVC Conduit Pipe ….dia ....mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. 19/20mm dia 2mm thick
400
-
20400
... More
25mm dia 2mm thick
250
-
13500
... More
32mm dia 2.5mm thick
200
-
16200
... More
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit in brick wall
150
-
3150
... More
upto 50mm conduit CC floor
100
-
3800
... More
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.25mm
50
-
1200
... More
Point wiring using Copper wire without switch. Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 1100V grade, COPPER conductor flexible multistrand FRLS PVC insulated, 2X1.5Sq.mm Cable confirming to the GTP without switch, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block complete for each outlet. GROUP A
15
-
2400
... More
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. 1.5 sqmm
1350
-
27675
... More
2.5 sqmm
1200
-
38400
... More
4 sqmm
1500
-
67500
... More
6 sqmm
1350
-
94500
... More
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1-3Way
8
-
760
... More
4-5Way
12
-
1260
... More
6Way
10
-
1250
... More
8Way
12
-
1740
... More
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. 1 to 3 Module
12
-
1320
... More
4 Module
14
-
1750
... More
6 Module
10
-
1750
... More
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way.
12
-
900
... More
6Amps two way
14
-
1330
... More
6Amps 3way socket.
10
-
1050
... More
Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab.
15
-
105
... More
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws.
15
-
4380
... More
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.
8
-
1816
... More
Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. With all accessories.(SM Enclosure Sheet Metal Execution)
2
-
10600
... More
Supplying and fixing regular MCCB distribution Panel confirming to IS 8828, on wall / wood board / flush mounting using required clamps, bolts, nuts, etc., with provision for fixing of suitable type capacity MCCB's as an incomer for 3 phase Double door withnecessary bus bar completely wired to use on 440Volts 3phase 4 wire powder coated painting etc., complete with a provision for fixing of single/three phase suitable capacity MCCB/MCB's as outgoings confirming to IS8828.
3
-
21000
... More
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 6-32 Amps SP. Group'A'
8
-
3472
... More
5-32 Amps DP. Group'A'
6
-
5454
... More
6-32Amps TPN
5
-
8575
... More
50-63 Amps TPN.
6
-
14382
... More
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.II - Double Door 12 way SPN
4
-
7200
... More
4 way TPN
3
-
7950
... More
6 way TPN
1
-
3330
... More
Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V up to 300mA sensitivity on existing wood/panel board 25 Amps DP
2
-
7400
... More
32 Amps 4 pole
2
-
8570
... More
Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter.
4
-
4740
... More
Supplying of multi function digital meter with three line back light LCD type display for voltage, Current, frequency, Power, power factor, KVA, KWH,KVAR suitable for 3 phase, 4 wire LT network with IP 54 degree of protection and completely wired as required with communication Port and Class 0.5s accuracy.
1
-
7750
... More
Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound.
3
-
1404
... More
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter.
1
-
4745
... More
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50 Hz 12/24v D.C.
6
-
2580
... More
Supplying, fixing and wiring Automatic Power Factor controller fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power stages and operating logic checking facility for healthy and efficient of each individual capacitor bank, measurement of network harmonics with indication when limit values are exceeded, Comprehensive displays with large, three place LED display, Long term memory for settings, protection for over voltage, power factor correction fault and no voltage, to connect / disconnect banks, with automatic recognition or with standard programs.
1
-
18000
... More
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 volts grade, for power factor improvement of rotating machineries like induction motor.
3
-
1200
... More
Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.
6
-
12300
... More
Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40*40*6mm
5
-
1275
... More
50X100X50X6mm C channel 50*6mm
5
-
3150
... More
Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 2 coats of red oxide primer paint and finally finished with approved colour enameled metal paint etc., complete.
225500
-
90200
... More
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 122 mm dia
2
-
5999.4
... More
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts.
1
-
4150
... More
Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. GI strip GI Strip. 25x3mm
7
-
525
... More
Copper strip 25x3mm
6
-
3030
... More
Supplying and running GI/Copper conductor for grounding and (along with other wires in conduit system of wiring) using necessary suitable size clamps, nails, guttas/spacers etc.
50
-
2900
... More
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975
200
-
36000
... More
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct.
40
-
620
... More
Digging of trench of 0.6m deep * 0.50mtr wide refiling the trench to the required ground level & consolidating etc., complete. (As per Civil SR KSRB I-2, P.7)
10
-
1020
... More
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.
10
-
1000
... More
Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV.
10
-
5660
... More
Supplying and fixing L.T. cast Iron pot heads suitable for 1.1KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps, bolts, nuts and washers etc.
6
-
2100
... More
Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)
10
-
1170
... More
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 2.5sqmm
10
-
40
... More
4sqmm
10
-
70
... More
6sqmm
12
-
84
... More
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep
4
-
16000
... More
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value ≥ 4.2 CMM / Watt, Three Blades of blade leaf 1.05mm thick Aluminium Alloy sheet, Class B motor insulation,Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 degC over and ambient of 40 0C by resistance method at 245Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty 48" Sweep 5 Star (1200mm)
4
-
11600
... More
Supplying, erecting, testing & commissioning of ON-LINEUPS system suitable for operation on 230V, 50Hz, A/Csupply, with isolation transformer all accessories completeand Excluding batteries and wiring complete.5 KVA ON LINE UPS
1
-
74250
... More
Supplying, installation, testing & commissioning of 12V DC,AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries.120 AH capacity
1
-
11800
... More
Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514 / ISO 3046 /ISO 8528 & IS 1002 / ISO 3046 Generator set specifications. UP to 62.5kva
1
-
338400
... More
Supply, Erection, testing and commissioning of AMF panel suitable for .....KVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....amps 4 pole contactor for alternatorwith thermal O/L relay,..... Amps 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor basedAMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing,PCC 1301 controller with water temperature /Lubeoilpressure/enginespeed,Voltage/ampere/Frequency/ KVA,Running-hour count, No of starts, Fault indication, over /under speed, Fails to start, Low oil pleasure, High enginetemperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Batterycharger on Push buttons AMf module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility.25KVA/20kw
1
-
89500
... More
Supplying & fixing retrofit type -PL- LED Lamp .......W LED linear source with CCT 6500 degree K, CRI> 70%. efficacy >80 lumen per watt, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The LED are driven by HF electronic driver integrated in the system, with PF > 0.95, power loss should < 5% of lamp wattage., short circuit & open circuit protection to beintegrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to275 volts. Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.8-9 Watts
10
-
3500
... More
Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.LED light fighting 1 x4'- 20/22 w LED light fighting 1 x4'- 20/22 w
8
-
3000
... More
LED light fighting 2x 4' - 20 /22 w
6
-
3750
... More
Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps.
10
-
1100
... More
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps.
4
-
1040
... More
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired
10
-
1600
... More
Supplying and fixing PVC/metal conduit Deep junction box 32mm deep junction box
1
-
60
... More
Supplying and flush mounting teak wooden box without front plank, made of not less than 12mm thick wood, after due groove cutting, Finishing with necessary cement plastering complete. 10"x7"x3" (254x178x76mm)
15
-
1155
... More
Supplying 6A flush type socket and 6 amps flush type SP switch either surface/flush mounting in existing gang box or in 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required as per IS 1293 and IS 3654 6Amps 3/5 Way
6
-
792
... More
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 600mmx600mmx170mm
1
-
12081
... More
Supplying & Fixing of 230 Volts 20/40 watts Fluorescent Lamp holder
20
-
300
... More
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia
2
-
5999.4
... More
Operator Light/Pump Vibrator/Grinder/Air conditioner Complete As per Specification
730
-
333026
... More
Engaging Mazdoor heavy Complete As per Specification
1460
-
651452
... More
1024 Tractor 50 HP Including Fuel Complete As per Specification
365
-
777085
... More
M.S. BAR SCREEN, Supplying of bar screen of 1 Nos. so as to remove the large sized particles present in the sewage water. Stainless Steel Perforated, Bar Screen opening of 10mm, Size: 600mm x 600mm, Make: Global. with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge
1
-
22220
... More
RAW SEWAGE PUMPS: Supplying of 2 Nos. (one working + one standby) Submersible type raw sewage water pumps to pump sewage from equilisation sump to aeration tank at 5.0 cu.m / hr flow rate. The pump shall be coupled to adequate H.P. electrical motor, The pump be suitable for solid handling capacity of 32 mm. The pump shall be suitable for the following shall requirements: Flow rate 5.0 cu.m /hr, Head 12- 15 mtr, Make: Kirloskar / Wilo/Equivalent with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
2
-
157696
... More
FINE BUBBLE AIR DIFFUSERS: Supply of required number of fine buuble air diffusers in EQT and required number of membrane type fine bubble air diffusers in SBR tanks. Of size 90mm dia x 1000mm Long EPDM Tubular membranes. Make: Equivalent. with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
4
-
527564
... More
COARSE BUBBLE DIFFUSERS: : Supplying of coarse bubble duffuser with 80 mm dia PVC tubular membranes. Make: Equivalent with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge
1
-
35840
... More
AIR BLOWERS: (I w+ 1s) : Supplying of 2 Nos. (One working + one standby) Rotary Twin / Tri Lobe design type air blower complete with motors, pulleys, One piece rigid Cl casing and side plates, silencer, base plate, Anti friction bearings, Rotary oil sealings having horizontal configuration. The blower shall be suitable for the following:Flow rate - 220.00 Cu.m/hr, Flow Pressure - 0.50 kg/sq. cm, Head - 4 mtr, I no. pressure guage 4" dial with needle valve tee and fittings. Make: TMVT /Usha, Motor for Airblower to be provided/ included with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge
2
-
526130
... More
ACOUSTIC COST: (for Air Blowers)Supply of sound proof acoustic hoods for air blowers of Usha make as per below technical specification cap in type system with suitable for above air blowers with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge
1
-
136192
... More
DECANTER MECHANISM: Supplying of Decanter Mechanism as per System requirement with sutibale size Electrical acutated valve with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
1
-
56760
... More
SLUDGE TRANSFER PUMPS: Supplying of 2 No (one working + one standby) Submersible type slude transfer pump at 2cu.m/hr flow rate @ 10 mtrs head. The pump shall be coupled to adequate H.P. electrical motor, The pump shall be provide with suitable enclosure with strainer arrangement for the protection submersible pumps. The pump shall be suitable for the following requirements: Flow rate - 2 cu.m/hr, Head - 10 - 12 mtr, Make: Kirloskar / Equivalent with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
2
-
80280
... More
PART B - TERITARY TREATMENT 100.00 CU.M/ DAY OPERATING DURATION - 10HRS: FILTER FEED PUMP: Supplying of filter feed pump Consisting of 2 Nos. (One working + one standby) Monobloc type filter feed pumps for pumping decant water through sand pressure filter and finally to treated water sump The pump shall be coupled to the adequate H.P. electrical motor and shall be mounted on a common base frame with mani fold. The pump shall be suitable for the following requirements:Flow rate - 5 cu.m / hr, Head - 30-40mtr, Make: Kirloskar / Equivalent with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge
2
-
118272
... More
SUBMERSIBLE DEWATERING TRANSFER PUMP: Supplying of Dewatering pump Consisting of 2 Nos. (One working + one standby) Submersible type Dewatering pumps for pumping Treated final water Tank 1 to Tank 2. The pump shall be provide with suitable enclosure with strainer arrangement for the protection submersible pumps The pump shall be suitable for the following requirements:Flow rate - 10 cu.m / hr, Head - 20-25mtr, Make: Kirloskar / Equivalent / KSB with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
1
-
103434
... More
IRRIGATION SUBMERSIBLE PUMP: Supplying of Irrigation pump Consisting of 1No. Submersible type Irrigation pumps for pumping Treated final water Tank 2 to Garding The pump shall be suitable for the following requirements:Flow rate - 05cu.m/hr, Head-10mtr, Make: Kirloskar / Equivalen / KSB with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
1
-
82001
... More
MS SAND PRESSURE FILTER: Supply of sand pressure filter for filtration of suspended impurities in treated sewage water. The filter shall be suitable for 10.0 Cum hr flow rate and designed to remove suspended particals impurity in treated sewage water The SPF shall be designed for a specific velocity of 12 m3 / hr / sq.m area and the approx size shall not be less than 800 mm dia. The sand pressure filter unit shall comply with the following technical requirements: Flow rate -10.00 Cu.m/hr, Back wash duration - 15 minutes. Painting Internal - Two coats of anti-corrosive epoxy paint, Painting external - Two coat of redoxide primer and above that a layer of two coats of enamel paint to be done to give the finishing:Filtering Media - Sand/Pebbles, pressure drop across unit -0.7kg sq.cm (max), Inlet turbidity - 100 as NTU, Dia of sand pressure filter unit - 800 mm dia. Further, the sand pressure filter unit shall comprise of the following. The sand pressure filter vessel shall be fabricated out of MS plate (CRCA sheet of Global make) not less then 6mm thick with dish ends out of 8 mm thick plate and painted internally with two coats of anticorrosive epoxy paint after sand blasting and externally with two coats epoxy primer followed by two coats of enamel paint of approved colour. The Sand Pressure filter shall be fitted with top inlet distribution and bottom collecting system. Pressure gauge with needle Ivalve shall be provided at inlet and outlet of Sand
2
-
381336
... More
MS ACTIVATED CARBON FILTER (ACF) Supply of activated carbon filter for filtration and removal of colour and odour in treated sewage water. The filter shall be suitable fo 10.0 Cu.m/hr flow rate and designed to operate for 10 hours. The ACF shall be designed for a specific velocity of 12 m3 / hr / sq.m area and the approx dia shall not be less than 800 mm dia. The activated carbon filter unit shall comply with the following technical requirement Flow rate -10.50 Cu.m / hr, Back wash duration - 15 minutes, Painting Internal - Two coats of anti-corrosive epoxy paint, Painting external - Two coat of redoxide primer and above that a layer of two coats of enamel paint to be done to give the finishing. Filtering Media - activated carbon, Pressure Drop across unit. -0.7kg / sq.cm (max), Dia of activated carbon filter unit - 800 mm dia. Further the activated carbon filter unit shall comprise the following. The activated carbon filter vessel shall be fabricated out of MS plate (make:Global) not less then 6mm thick with dish ends out of Smm thick plate and painted internally with two coats of anticorrosive epoxy paint after sand blasting and extemally with two coats epoxy primer followed by two coats of enamel paint of approved colour. The Activated Carbon Filter shall be fitted with inlet distribution and bottom collecting system. Pressure gauge with needle valve shall be provided at inlet and out let of Activated Carbon filter. "V-Notch" of suitable size fabricated out of
1
-
232960
... More
CHLORINATOR: Supply of electronic chlorine dosing unit with automatically operated dosing pump etc. The unit shall comprise of the following: One no single moulded FRP cylindrical type chemical solution tank of 50 litres capacity having detachable lids with moulded inserts for mounting of pumps and stirrer One on. Electronic diaphragm type positive displacement pump of Asia LMI make for chemical dosing with plastic head, The electronic pump shall be operated on 220V single phase supply and shall be mounted directly on the tank top Complete set of pipes, valves and fittings foot valve magnetic float switch to trip the dosing pump at low level of chemical in the tank. The free chlorine content in the filtered water sh not less than 0.5 PPM Concrete bed/pedestals of suitable size and thickness in cement concrete 1:2:4 for mounting the doser base with anchor fastener, bolts and nuts and neatly finished smooth with floating coat of cement mortar. The pump shall be suitable for the following requirements:Min. Actuating Pressure - 0.3 kg/sq cm, Max. Working Pressure - 0.5 kg/sq cm, Max. Temperature - 50 degree Centigrade, Dosing flow range. As per system requirement, Head - 5 - 10 mtr, with includes all labour charges trasportion charges. installation charges and all other taxes with all lead and lift as per the approval of engineer incharge
1
-
35840
... More
MCC PANEL: Supply of combined /common motor control center panel (MCCP) for filtered water pumps. The MCC shall be sheet steel fabricated, finished with powder coating of approved color, and of floor mounted, free standing cubicle type with incoming MCC TP and N bus bars and outgoing with fuse switch units, starter relays, over load, UV earth fault protection with time delay sequence operator etc The panel shall have Voltmeter, Ammeter and indicating lamps on the incoming side only indicating lamps for the pumps on outgoing side to indicate the operation mode. The panel shall be complete in all respect and prior to the supply. fabrication drawing shall submitted consultants approval. The rate quoted shall be inclusive of the following: Earthing for panels Dry run protection arrangement for the following: Raw Sewage Pump, Air Blowers & motors: Return Sludge Pump, Screw Pump. Filter Feed Pump Filter feed Pump for Ultra filtration, Ultrafiltration backwash pumps, Audio / visual alarm indication in the event of malfuntioning of STP with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
1
-
215040
... More
PLANT PIPING: Supplying of the necessary piping works for the STP consisting of interconnecting piping, fittings, valves within the battery limit of the Sewage Treatment Plant MOC of the piping including all fittings like tees, elbows, bends, collars, coupling, etc jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
1
-
215040
... More
SLUDGE HADLING CENTRIFUGE SYSTEM:. Top dischargeBasket Centrifuge. Three Points Pendulum Suspended Outer body - MS/ Epoxy painted. Foot mounted, Crompton Greaves make. Centrifuge force depends on material density.Paddle disc brake arrangements to stop the basket. Limit switches for Lid. Foundation bolts provided. P.P. filter bag provided with includes all labour charges trasportion charges, installation charges and all other taxes with all lead and lift as per the approval of engineer incharge.
1
-
222208
... More
Installation and commissioning of the 100 kld STP with all the above electro-mechanical equipments with includes all labour charges trasportion charges. installation charges and all other taxes with all lead and lift as per the approval of engineer incharge
1
-
172032
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements