Bruhat Bengaluru Mahanagara Palike Tender

code04 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density and as per direction of Engineer-in-charge. MORTH 406 Wet Mix Macadam (Plant Mix Method) ---- KW3

code05 - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom and as per direction of Engineer-in-charge. Tack coat on Bituminous surface ---- KW3

code06 - Providing and laying Bituminous Macadam with 120 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction and as per direction of Engineer-in-charge Bituminous Macadam Grading - I for traffic 20 MSA ---- KW3

code07 - Providing and laying Bituminous Concrete with 120 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.2 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects and as per direction of Engineer-in-charge Bituminous Concrete Grading I for traffic 20 MSA ---- KW3

code08 - Painting Lines, Dashes, Arrows etc on Roads in Two Coats on New Work, Painting lines, dashes, arrows etc on roads in two coats on new work with ready mixed road marking paint conforming to IS:164:2015 on bituminous surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control and as per direction of Engineer-in-charge (ii)Up to 10 cm in width ---- KW3

code09 - Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer in-charge. In cement mortar ---- KW3

code10 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately, Mix 1:4:8( M5) Using 40 mm nominal size graded crushed coarse aggregates as per direction of Engineer-in-charge. ---- KW3

code11 - Re - Construction of size stone masonry with available stones in CM 1:6 as per direction of the Engineer in charge. ---- KW3

code12 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand). as per direction of Engineer-in-charge. ---- KW3

code13 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge. ---- KW3

code14 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2185 (Part - I) - 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. as per direction of Engineer-in-charge. ---- KW3

code15 - Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of engineer-in-charge. ---- KW3

code16 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately, Mix 1:3:6( M10) Using 20 mm nominal size graded crushed coarse aggregates. as per direction of Engineer-in-charge. ---- KW3

code17 - Providing B S slabs of selected qty roughly dressed havinf a size of 10cms thick and fixed in CM 1:6 including fixing curing etc., complete as directed by the Engineer in charge of the work ( Exlusive of GST and area loading charges) (Data rate) ---- KW3

code18 - Providing one line dressing to granite stone slab/granite stone masonry as per specifications as directed by the Engineer in charge of the work ( Exlusive of GST and area loading charges) ( Data rate) ---- KW3

code19 - Providing chamfering edges to stone slab 2.5 cms. wide as per specifications. (only chamfered length shall be recorded) inclusive of all Taxes complete as directed by the Engineer in charge of the work ( Exlusive of GST and area loading charges) ( Data rate) ---- KW3

code20 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. ---- KW3

code21 - Removing and resetting the kerb stones. as per direction of Engineer-in-charge. ---- KW3

code22 - Providing and fixing pre cast solid cement concrete kerb stones made out of C.C. 1:2:4 with top and bottom width 114 and 165mm respectively, 400mm high and 450mm in length finished with CM 1:3 plastering and finishing cutting, including form work, curing, including cost of all materials, labour, hire charges of machinery, loading, unloading, lead and lift, transportation etc., complete as directed by the Engineer in charge of the work (Exlusive of GST and area loading charges) ( Data rate) ---- KW3

code23 - Providing and applying ready mix priming coat over concrete / masonry / asbestos cement sheet / plastered surfaces including preparing the surface after thoroughly cleaning of oil, grease, dirt and other foreign matter, and sand papering including cost of materials, labour, complete as per specifications. as per direction of Engineer-in-charge. ---- KW3

code24 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge ---- KW3

code25 - Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in Charge. and as per directions of Engineer-in-charge ---- KW3

code26 - Supply and Fixing of Retro-reflective Single Arrow Road name sign boards of size 1200 mm x 900mm made out of retro reflective sheeting confirming to type XI standards of ASTMD 4956-09 & as per IRC 67-2012 for full background of blue colour and white letters and fixed over 4mm thick alluminium composite material sheet having mimimum 0.5mm thick aluminium skin on both sides with back side painted grey colour and fixed over back support frame SS angles of 15mmx20mmx1.2mm, supported by 38mm OD SS steel pipes all round in 304 garde and two numbers of verticale posts of 50mm outer dia SS dteel pipe of 202 grade firmly fixed to the ground by means of proporly designed foundation of size 450mm x 450mm x 600mm in 1:1.5:3 ratio cement concrete. the background shell be blue in colour with letters and border in white, the item includes earthwork excavation, cost of all materials, loading, unloading, lead, lift, transportation etc., complete. as per directions of engineer incharge of work clause 6.9 of IRC 67-2012 for type XI retro reflective sheeting from the sheeting manufacture and a certified copy of text reports for an independent text laborartry confirming to clause 6.7 of IRC 67-2012 including outdoor weather exploser report for the retro reflective sheeting offered shell be submitted by the contractor for techinical qualification in the tender complete as per specifications and as per directions of Engineer-in-charge of the work (Dtae Rate) ---- KW3

code27 - Loading and Unloading of Stone Boulder/Stone aggregates / Sand /Kankar /Moorum.(Tipper 10 m3), Cost of Haulage Excluding Loading and Unloading complete as per specifications.Case - I : Surface Road. as per direction of Engineer-in-charge. ---- KW3