Bruhat Bengaluru Mahanagara Palike Tender

Providing T.M.T. steel reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specification. .Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification No. 1500, 1700, 2200. including cost of materials, labour, HOM complete as per specifications.-do- Wall & bottom thickness 15cm.Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing and laying in position plain/Reinforced cement cement concrete M20 for sub- tructure /Superstructure works, with cement @ 320 kgs, 20 mm & down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregates @ 0.46 cum machine mixed with super plasticisers @ 3 lts confirming to IS 9103-2008,concrete laid in layers, well compacted and providing weep holes wherever necessary. with necessary scaffolding, form work etc., including cost of labour, HOM curing etc., complete..Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at 2m. apart in each course including cost of materials, labour, curing complete as per specifications. .Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing and laying in position plain cement concrete of Mix 1:2:4 with OPC @ 240kgs, with 20mm and down size graded granite metal coarse aggregates @ 0.878 cum and fine aggregtes @ 0.53cum, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM curing complete as per specifications. Specification No..Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing precast slab of 250 mm thick including cost of all materials, labour, curing,transportation,loading ,unloading,etc.,complete as per the direction of engineer in charge- Data rate).Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing precast slab of 100 mm thick including cost of all materials, labour, curing,transportation,loading ,unloading,etc.,complete as per the direction of engineer in charge-.Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing granite slabs of selected quality roughly dressed and fixed in cement mortar (1:6) including fixing curing etc., complete.- do - 10 cms thick.Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing one line dressing to granite stone slab / granite stone masonry as per specifications. .Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing Machine cutting to granite stone slabs edge all four sides to get plain even surface, the work includes the cost of cutting blades, hire charges of cutting machine, Generator and including cost of all labour, materials (Excluding cost of BS slabs) HOM of machineries, with all lead and lift charges, loading and unloading charges etc., complete as per the direction of the Engineer-in-charge of the work(Data Rate).Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top width 100mm and Bottom width 150mm respectively, 300mm high with C:M 1:3 Plastering and finishing cutting including form work, cutting, includingcost of all materials, labours, hire charges of machinery, loading ,unloading,lead and lift, transportion ect,complete to be laid between travel lane and cycle track /landscape with all lead, lift, loading, unloading, complete as per direction of engineer incharge (form finish concrete no painting to be done.Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Painting two coats after filling the surface with synthetic enamel paint in approved shades on new plastered concrete surfaces, with materials, labour complete as per specifications..Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Ms gratings 260 mmx 260 mm.Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Cleaning the existing black topped surface with brooms, soft brushes and finally dusting with old gunny bags and / or compressed air to receive bituminous treatment including cost of all materials, labour, HOM complete as per specifications. .Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing and applying tack coat using 80/100 grade bitumen(VG10) on the prepared black topped surfaces at 2.5 kg per 10 sqm, heating bitumen in boiler fitted with spray set (excluding cleaning of road surface) including cost of all materials, labour, HOM complete as per specifications..Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing and laying bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction in all respects complete as per specifications. Clause 507 of MORTH V revision - do - using40/60 TPH capacity H.M.P. with Mechanical Paver Gr-II (30 mm to 40 mm) with 5.4% VG-30 Bitumen.Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface/ Concrete Surface: Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 standards specified. The finished surface to be level, uniform and free from streaks and holes complete as per specifications..Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Providing and fixing of road stud 100x 100 mm, die-cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS: 873 part 4:1973 complete as per specifications .Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge

Constructing un-reinforced, plain cement concrete for pavements using Grade concrete M30 over a prepared base with OPC coarse aggregate at 0.69 cum, fine aggregates at 0.46 cum,Coarse and fine aggregate conforming to IS:383-2016, with Superplastizer at 3 lts conforming to IS 9103-2008. mixed in a concrete mixer of not less than 0.6 cum capacity and appropriate weigh batcher as per approved lines and grades, textured with texturing machine, and curing including cost of all materials, labour,hire charges of machineries,all lead & lift charges etc., complete as per specifications mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work as per drawing). & Spreading the concrete with shovels, rackers compacted using needle, screed and plate vibrator and finished with floaters in a continuous operation including provision of contraction, expansion, construction and longitudinal joints,including groove cutting charges, joint filler, separation membrane of impermiable plastic sheet of 125 micron, sealant primer, joint sealant, admixtures as approved, curing compound, finishing -do- with - with OPC at 320 kg/cum and GGBS 40 kg/cum conforming to IS:12089,coarse aggregate 0.69cum, fine aggregate 0.46cum..Complete the work Including all lead and lift Charges as per the direction of Engineer Incharge