Bruhat Bengaluru Mahanagara Palike Tender

code04 - Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) (Item no 5.1.1 Pg.no 9 of SR 23-24 Vol-2)

code05 - Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) (Item no 5.2 Pg.no 9 of SR 23-24 Vol-2)

code06 - Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4. Light shade pigment using white cement (1 cement: 4 coarse sand) (Item no 9.6.1 Pg.no 59 of SR 23-24Vol-2)

code07 - Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165 mm respectively 400mm in length finished with CM 1:3 Plastering and finishing cutting including formwork, curing, Including cost of materials, labour charges of machinery, loading & unloading, lead and lift, transportation etc.,complete as directed by the Engineer in Charge of the work.(Approved Data Rate Excluding GST) Yelahanka Zone

code08 - Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in- charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge. (PWD SR 2023-24 P-85, I-11.28, Vol-II)

code09 - Supplying, filling, spreading &leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer in-charge. (Item no 17.2 Pg.no 175 of PWD SR 23-24 Vol-2)

code10 - Painting Two Coats on New Concrete Surfaces,Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces (KWPD 2023-24, V-III, Item No.8.10, Page No.66)

code11 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (KWPD 2023-24, V-I, Item No.2.1.4, Page No.15)

code12 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.(Page No. 82 Item No. 11.16.2 Vol-2 of SR 23-24)

code13 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction ofEngineer in-charge. (Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade) (KWPD 2023-24, V-2, Item No.11.59, Page No.95)

code14 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (KWPD 2023-24, V-2, Item No.8.41, Page No.48)

code15 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS- 694:1990. 5C x 2.5 mm2 (P.No.6- I.No.2.5.10) & of PWD SR 23-24 Vol-6

code16 - Supply and fixing of children Play Equipment Maxima N Swing: Inverted U shaped structural posts of height 2.31 m are to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Toprail at height 2.31 m and Dia 114 mm shall be an all-robotic welded unit, fabricated from 114 O.D. Plastic Components such as swing seats [super thick plastic] shall be animated and shall be rotationally molded from anti static, co polymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6-8mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges (Approved Data rate)

code17 - Supply and fixing of children Play Equipment Monkey Bars - E: Support posts of height 2.15 m are to be schedule Galvanized steel with a 114 mm OD (Outer Diameter). All the posts are to be finished with a baked on powder coat finish. Handrail of size 1.3 m and Dia 48 mm shall be an 14 welded unit, fabricated from 48 0.D. galvanized steel pipes with a baked on powder coating finish. Bolts, nuts, screws, washers and etc used for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Electro - statically applied polyester powder must have a tough finish with maximum durability. Data Rate Approved ration Charges The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and transportation charges.(Approved Data rate)

code18 - Supply and fixing of childern Play Equipment Two seater seesaw: The See Saw consists of 2 poles of Dia 114mm and thickness of 2.5mm which balances the horizontal rod at the 17 center which is of size 3110 mm length and Dia 114 mm. It consists of 2 seats which is made of LLDPE virgin plastic of size 305mm X 213 mm X 125 mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges (Approved Data rate)

code19 - Supply and fixing of children Play Equipment Merry go round - DX: The Merry go round consists of a round platform which is made of galvanized steel and has a thickness of 2.5 mm. It is also power coated with the thickness of 2.5 mm. It is of Dia 1210 mm. It has 3 inverted L shaped handrails which is made of Galvanized steel 20 and of dimensions as 474 mm 815 mm. It has thickness of Dia 32 mm. The 3 handrails are separated exactly. All the 3 handrails are connected to the Centre with the help of a rod which is also made of Galvanized steel and of Dia 48 mm and height 815 mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges (Approved Data rate)

code20 - Fabricating, providing & reacting in position dip galvanized gate. using 72x72x4.8mm sq GI pipe frame with top pipe bending in heavy duty hydraulic press with sand packing & hot bending to from double arch as per drawing profile, 20mm hot dip galvanized sq. rod for verticals at 1.5rhm c/c as shown in the drawing including providing hot dip galvanized forged ornamental design in between sq,rods & heads at top, middle and bottom. intermediate supports of 75x12mm And 50x6mm arch bent to hot dip galvanized flats, the work is inclusive of thoroughgoing GI. flat GI sq.rods,placing, welding all the joints including grinding, finishing metal patty, painting two coats enamel painting. the rate is inclusive of all maternal like GI sq. pipe.GI sq.rods,GI forged design etc., heavy duty hinges are made out of 75mm solid sq. block assembled with 20mm dia bearing in three places for each flop. Heavy duty locking arrangements at tow places including cost of labour,painting,reacting charges using hoist pulley cranes with all lead & lift,loading,transportation ,unloading,scaffolding charges & all other incidental charges for successful campanile of the work as per direction of the engineer-in-charge of the work.(APPROVED DATA RATE)

code21 - Supply and fixing of Retro Reflective Double Arrow road name sign board of size 2000mm x 900mm made out of retro reflective sheeting conforming to Type XI standards of ASTM D 4956-09 & as per IRC 67-2012 for full back ground of blue colour & white letters and fixed over 4 mm thick Aluminium Composite Material sheet having minimum 0.5 mm thick Aluminium skin on both sides with back side painted grey colour and fixed over back support frame SS angle of 15mm x 20mm x 1.2mm, supported by 38mm OD stainless steel pipe all round in 304 grade and 2 nos of vertical posts of 50 mm OD stainless steel pipe of 202 grade firmly fixed to the ground by means of properly designed foundation 2 of size 450mm x 450mm x 600mm In 1:1.5:3 ratio cement concrete. The background shall be blue in Each color with letters and border in white, the item includes earthwork excavation, cost of all materials, loading, unloading, lead, lift, transportation etc., complete, as per clause 6.9 of IRC 67-2012 for Type XI retro reflective sheeting from the sheeting manufacturer & a certified copy of test reports from an Independent test laboratory conforming to clause 6.7 of IRC 67-2012 Including outdoor weather exposure report for the retro reflective sheeting offered shall be submitted by the contractor for lechnical qualification in the tender with all lead and lift and completion of the work as per directions of the Engineer-in-charge of the work (Approved data rate)

code22 - Supply of 3-4 Mtr MS Painted MS Pole with dimension of pole 2.5mm to 3mm guage with 3 MTR 165mm to 114. 114 to 88.9mm Pipe with Body any Colour with top single arm suitable for circular light fitting.. pole shud be designed with two castings in bewween in separation of Guage.. Square base Plate in welded at the bottom of the pole of 200x200 with required 4 nos foundation Bolts suitable for cable entry hole of 60mm at the bottom of the Pole. Including MCB Cutting of 500mm from the bottom of the pole with 12 inches Height Including Gasket for the cutting of 500mm from the bottom of the pole with 12 inches Equivelant to EMERALD LIGHTING Cat Num: ELS-Sapphire- 100W (Approved Data Rate)

code23 - Supply of 350-600 mm dia of Circular shape post top lantern inside built with 60W to 70W LED suitable for 6 to 8 Mtr Pole height with Required powder coating on the surface of the fitting. Led should cover with white diffuser of 0/40 sheet acrylic anti glare inside the Circular. Led should be make of OSram with suitable driver. Make Emerald ELS CL60 Circular Light fitting (Approved Data Rate)