Bruhat Bengaluru Mahanagara Palike Tender

code04 - Earth work excavation for Foundation by mechanical means for all works and depth upto 3m, as per drawing and technical specifications, including setting out, shoring , strutting, barricading, caution lights, including dressing of excavated surfaces, disposing off or levelling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m and lift upto 1.5m including cost of labour, tools, usage of machinery and other appurtenaces required to complete the work. In all kinds of soils upto 3 m depth. (P.No.8,I.No.1.14.1, Vol.1, SR of 2023-24)

code05 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement and formwork shall be paid separately) Mix 1 3 6 (M10) Using 40 mm and down size graded crushed coarse aggregates..( Vol-I P.No-15 I.No-2.1.3 CSR-2023-24)

code06 - Providing and laying in Reinforced Cement Concrete for all Foundation works. The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticizers laid in finished layers, well compacted using needle vibrators, including all lead and lifts, cost of all materials, quality confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all the other appurtenances required to complete the work as per technical specifications. M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates. ( Vol-I P.No-15 I.No-2.2.1 CSR-2023-24)

code07 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening,cutting, bending, hooking, lapingorwelding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. ( Vol-I P.No-18 I.No-2.11h SR of 2023-24)

code08 - Providing and laying 100mm thick pre-cast cover slabs over Road side drains or utility ducts or Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 550 at 6kgorm2, slabs jointed in CM 1 3 proportion and nicely finished Including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, scaffolding, usage of machinery, curing, lead and lift charges etc, Complete. .. (V-2,P.No.152, I.No.17.14of PW, PandIWTD S.R 2023-24)

code09 - Providing and fixing 250mm thick precast RCC Covering slab using reinforced cement concrete M-20 mix with stone aggrigatte 20mm and down size including centring, shuttering, reinforcement and bad bending machine mixed concrete laid in layers complete as per specifications

code10 - Supplying and installation of COMPOSITE FIBER REINFORCED POLYMER Water Gully Grating with bottom chamber of appropriate size of 450 x 450 mm and a load bearing capacity of 40MT (D400 Load capacity) of approved bond confirming to BSEN-124 1994orIS 1726. Gully grating should have minimum 30Percent of water entrance area that of clear opening of chamber. It shall give top abrasion resistant layer of decorative dark grey finish. The cover should have a beam design at the bottom with thickness in the center of a minimum of 125MM to 150MM at the center. The chamber should have one circular cut of 200mm dia. It shall also confirm “Permanent set” criterion as per BSEN-124orIS 1726. The rate is inclusive of Earthwork of 750mmx750mmx600mm pit, which should be placed over 100mm thick bed concrete, reinforced with TMT bars Fe 550 of not less than 15 kg and Concreting using M20 grade concrete of 150mm thick till the depth of chamber. Product should be tested in test lab for load capacity and permanent set with cost of all materials, transportation, loading and unloading charges etc., complete as per specifications and directions of Engineer-Incharge of the work.( including Area Weightage and Excluding GST)

code11 - Loading and Unloading of Stone BoulderorStone aggregatesor SandorKankarorMoorum. (Tipper 5.5 m3).Lead and Lift 16km

code12 - Cost of Haulage Excluding Loading and UnloadingCase-1 Surfaced Road (Taking output 18 t load and lead 10 km = 180 t.km)