Bruhat Bengaluru Mahanagara Palike Tender

Supplying, Fitting and Placing un-coated TMT Fe 500 & above bar Reinforcement in Foundation complete as per Drawing and Technical Specifications with all lead and lift charges and as per the directions of Engineer in Charge

Providing and laying in position Reinforced cement concrete M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other aggregates appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork to be paid separately) appurtenances required to complete the work as per technical specifications. as per Engineer in Charge

Formwork, Centering & Shuttering Complete for M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (P.No. 15, Sl.No. 2.1.3, Vol-1, 2021-22) - Appendix I – Additionalities for Formwork, Centering & Scaffolding Foundation, Sub structure of Cross drainages 5% - with all lead and lift as per the directions of Engineer in Charge

Providing & fixing RCC Precast Cover slab of 230mm thick for drain in cement concrete M20 using graded granite jelly 200mm & down size with steel reinforcement including formwork, lift charges, curing & concrete finished surface both sides etc,. And as per drawing & the direction of Engineer-in-charge. (Approved Data Rate)

Wet Mix Macadam (Plant mix method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.with all lead and lift charges and as per the directions of Engineer in Charge

Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90 kg per m2 using mechanical means. .with all lead and lift charges and as per the directions of Engineer in Charge

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned with mechanical broom. .with all lead and lift charges and as per the directions of Engineer in Charge

Providing and laying Bituminous Macadam with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction.with all lead and lift charges and as per the directions of Engineer in Charge

Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of pecified grading, premixed with bituminous binder VG-30, @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with mechanical paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects with all lead and lift charges and as per the directions of Engineer in Charge

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 g/ m2 area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC :35:2015. The finished surface to be level, uniform and free from streaks and holes. Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface .with all lead and lift charges and as per the directions of Engineer in Charge

Loading and Unloading of Stone Boulder/Stone aggregates/ Sand/Kankar/Moorum. as per the direction of Engineer In charge

Cost of Haulage Excluding Loading and Unloading, Case-1 : Surfaced Road A Taking output 18 t load and lead 10 km = 180 t.km as per the direction of Engineer In charge