Bruhat Bengaluru Mahanagara Palike Tender

code04 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately) Mix 1:3:6 (M10) Using 40 mm nominal size graded crushed coarse aggregates

code05 - Providing and laying in position cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers, laid in layers, well compacted using needle vibrators, providing weep holes wherever necesary, including all lead & lifts, cost of all materials of quality, confirming to the requirements of relevant IS codes, labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement to be paid separately) Mix 1:2:4 (M15) Using 20 mm nominal size graded crushed coarse aggregates. Appendix I Additionalities for Formwork, Centering & Scaffolding, P No-111,Sl No.3, Foundation-5%)

code06 - Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

code07 - Providing and fixing pre cast solid cement concrete kerb stones made out of M20 with top and bottom width 114 and 165 mm respectively 400 mm high and 450 mm in length finished with CM 1:3 plastering and finishing Cutting including form work curing, including cost Materials, labour charges of Machinery, Loading and unloding, lead and lift, transportation ete., comlete as directed by the engineer in charge of the work

code08 - Providing 20 mm cement plaster with cement mortar 1:3 (1 cement:3 coarse sand) finished with a floating coat of neat cement tobrick/stone masonry including rounding off corners wherever requiredsmooth rendering, providing and removing scaffolding, including costof materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge

code09 - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces

code10 - Providing and laying heavy duty cobble stones 60mm thick interlock pavers, using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per m2 over 50mm thick sand bed ( average thickness ) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level,including cost of materials, labour and Usage charges of machinery

code11 - Stone Paragola :Providing and Fixing of Stone Pergola by size of 1.20mt x1.80mt L 2.50mt, Ht 3"x 4" size single line dressed 4nos column and 2nos beam and 4nos of rafters. Inclusice of fixing charges and transportation and earth work excavation.

code12 - Providing and fixing plain sadarahalli granite benches of of 4ft length and 1ft width with side arm support of 18" height with all lead and lift and loading as per the direction of in charge of work including all taxes

code13 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in- Charge.

code14 - Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer- in-charge. (Made of G.I. wire of dia 4 mm)

code15 - Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions of Engineer-in-charge.

code16 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @ 0.80 ltr/10 m ² of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

code17 - Fabricating, providing and erecting in position Hot dip galvanised Gate. Using 72*72*4.8mm Sq. GI Pipe frame with top pipe bending in heavy duty hydraolic press with sand packing and hot bending to form double arch as per drawing profile,20mm hot dip galvanised sq.rod for verticals at 150mm c/c, as shown in the drawing including providing hot dip galvanised forged omamental design in between sq.rods and heads at top,middle and bottom. Intermediate supports of 75*12mm and 50*6mm arch bent to hot .dip galvanised flats.the work is inclusive of throughing GI.flat GIsq.rods placing,welding all the joints including grinding,finishing metal patty,painting wo coats enamel painting.The rate is inclusive of all materials like GI sq.pipe,GI.Sq.rods,GI forged designs etc., heavy duty hinges are made out of 75mm solid sq.block assembled with 20mm dia bearing in the three places for each flop. Heavy duty locking arrangements at low places including cost of labou,pailnting,erecting charges using hoist pulley cranes with all lead and lift, loading, transportation,unloading,scaffolding charges and all other incidental charges for sucessful completion of thework as per directions of the Engineer-in-charge of the work.

code18 - Supply and fixing of childern Multi Play Equipment with swing and toddler and tubular slide with animated roof upright structural posts of height 2.2m, 2.6m and 3.0m are to te schedule HOT DIP Galvanized steel with a114mm OD and 2.2mm wall thickness of the tubing. The finished products must have following Each characteristice.Deck of sue 1.45 x 1.45m and Staircase of size 105 mx 0.77 m are fabricated from 2mm perforxed solid punched steel. Deck perimeter is precision pre punched for attachments. Handrail of height 90m and dia 32 mm shell be all robotic welded unit. Deck of sze 1 45 x 1.45m and Staircase of size 1.05 mx0.77 m are fabricated from 2mm perforated solid punched steel. Deck perimeter is precision pre punched for attachments Sun Roof of size 2.0 mx 1.78 mx 0.77m, Double Side of size 1916 mm x 1134 mm x 1987 mm, Tube Slide of size 2160 mm x 1042 mm x 2300 mm, Shrimp Slide of site 1635 mm x 1107 mm x 1888 mm Panels Roofs and panels are copyrighted and IP protected worldwide. Top rals Of Swing of size 3.2 mx114 m are all robotic welded systems, fabricated from 114 0.D. and thickness of 2.2 mm galvanized steel pipes with a baked on powder coat finsh The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges

code19 - Supply and fixing of childern Play Equipment Monkey Bars-E: Support posts of lieight 2.15 m are to be schedule Galvanized steel with a 114 mm OD (Outer Diameterl All the The posts are to be finishied with a baked on powder coat finish. Handrail of size 1.3 m and Dia 48 mm shall be an 14 welded unit, fabricated from 48 O.D. gaivanized steel pipes with a baked on powder coating finish. Bolts puts screws, washers and etc ured for assembly shall be stainless steel 304 grade and shall be of tamper resistant stainless steel. Electro statically applied polyester powder must have a tough finish with maximum durability The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges

code20 - Supply and fixing of childern Play Equipment Maxima N Swing: Inverted U shaped structural posts of height 2.31 mare to be schedule HOT DIP Galvanized steel with a 114mm OD and 2.2mm (wall) thickness of the tubing. Toprail at height 2.31 m and Dia 114 mm shall te an all-robotic 2 welded unit, fabricated from 114 O.D. Plastic Components such as swing seats [super thick plastic] shall be animated and shall be rotationally molded from antistatic, copoymer, virgin linear low density UV stabilized polyethylene, with color molded in and minimum thickness of 6-8mm. The rates are to be inclusive of supply and installation at site. Inclusive of All Taxes and Transportation Charges