Bharat Sanchar Nigam Limited Tender

Supplying transporting, loading, unloading and installing low back chair (vistor chair) of Merryfair make - Model - P067YFB6SV -Fulkrum (Synchro-Tilt Ergonomic with 3-way adjustable Armrest with following specification.a) Adjustable headrest 40 degree tilt, Seat Fabric, Mesh Back, PP Backbone, b) Seat Slide Seat available.c) Lumbar support with depth adjustment, d) The chair should have Weight Capacity 120kg, e) Multi Positions Locking synchronize Mechanism, f) 3 way Adjustable BIFMA Level 3 gas lift for Seat height adjustment, g) Glass-fibre filled Nylon base. f) All the components shall be 100% recyclable.i) Greenguard & BIFMA Certified and 10years on site warranty and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing 2 seater Sofa Set of Marryfair make - Domino Model - Corner Module 425NAA00AY (2 nos) of with following specification. a) The sofa set has to be modular systems with Linear and corner Modules. b) Each Modular shall be securely connected with Neighbouring module using and integrated linking bracket which can be refastened by an allen key. c) It shall be easily reconfigured at any place by just using Allen Keys. d) The corner module has to be supplied with 2 Nos. Right angeld brackets, that doubles as an armrest on one side. e) Generous armrest width allows impromptu support for computer notebooks. f) Each Modular of the sofa set has to be 750 mm wide and 750 mm broad with seat height to be 400 mm from ground giving healthy seating posture the back height shall be 320 mm from seat. g) The sofa Set has to be upholstered with Textile Fabric covering over polyurathene Foam. h) The Structure is a two way shell of Injection-moulded polypropelene in black color, the Shell surface is adorned with patterns inspired by wood grains or Tree rings. i) Base feet is of injection moulded black polypropelene are adjustable for height to compensate uneven floors. j) Linking brackets shall be made up of steel with black powder coating in a range of 60-80 microns. The work shall be carried out as directed by Engineer incharge.

Supplying, transporting, loading, unloading and installing 1 seater sofa set of Merryfair make - Domino Model - Linear Module 426NAA00AY (1 no) with following specification. a) The sofa set has to be modular systems with Linear and corner Modules. b) Each Modular shall be securely connected with Neighbouring module using and integrated linking bracket which can be refastened by an allen key. c) It shall be easily reconfigured at any place by just using Allen Keys. d) The coner module has to be supplied with 2 Nos. Right angeled brackets, that doubles as an armrest on one side. e) Generous armrest width allows impromptu support for computer notebooks. f) Each Modular of the sofa set has to be 750 mm wide and 750 mm broad with seat height to be 400 mm from ground giving healthy seating posture the back height shall be 320 mm from seat. g) The sofa Set has to be upholstered with Textile Fabric covering over polyurathene Foam. h) The Structure is a two way shell of Injection-moulded polypropelene in black color, the Shell surface is adorned with patterns inspired by wood grains or Tree rings. i) Base feet is of injection moulded black polypropelene are adjustable for height to compensate uneven floors. j) Linking brackets shall be made up of steel with black powder coating in a range of 60-80 microns. The work shall be carried out as directed by Engineer in charge.

Supplying, transporting, loading, unloading and installing Low back chair of Merryfair make - Model - KOPI-O with following specification.a) Without armrest of Injection-moulded Polypropylene Shell, 4 Leg chair with Silver Epoxy frame. b) Weight capacity 120kg, c) Greenguard & BIFMA Certified, d) 10 years on site warranty and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing Foldable Table of Merryfair make - Model - 'Desk Elements' MASA of size 1500 mm x 750 mm with modesty panel of with following specification. a) The Table Top-25mm thick E1 grade PLPB table top of approved brand and manufacture, b) Understructure- Die cast Connector leg vertical with increased stability and damped vibration, c) Metal Leg of descending cross section gives better stability and elegant looks to the system, d) Base are made out of Die-cast connector and connected with vertical leg and casters. e) The table shall be easy to move, rearrange as per requirement, foldable and stacking, easy to assemble / install. f) The table shall not have wire management system and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing of Main Desk of HNI make - Model -Trent of size 1800 mm x 900 mm x750 mm with following specification. a) Side unit of size 1500 mm x 450 mm x 750 mm b) Table with 25mm thick prelaminated partical board top of approved brand and manufacture c) supported by 18mm thick Prelam Gable Ends with Semicircular profile end Top. d) Gable ends shall be fitted to the Worktop with KD Fittings & M-6 Screws at prefitted inserts below Table Top shall be provided with 2 Nos. of glide screws for levelling of the workstation/table. e) All edges shall be provided with hot pressed 1mm thick PVC edging of approved brand and manufacture using special hot melt glue at high temperature. f) One No. of 18mm thick Prelaminated Modesty panel of approved brand and manufacture with clearence of 100-150mm from Finished Floor Level is included in the workstation. g) Side unit to have One No. Storage Combo of One Single Drawer + One Open Storage and as directed by the Engineer in charge.

Supplying, transporting, loading, unloading and installating of Main desk of HNI make - Model -Regus of size 1500 mm x 750 mm x 750 mm with following specification. a) Side unit of size 1200 mm x 500 mm x 750mm b) Table with 25mm thick postlam partical board top of approved brand and manufacture, c) supported by 25mm thick Prelaminated Partical Board of approved brand and manufacture d) Gable ends with CRCA steel of approved brand and manufacture Powder coated 1-1.2mm thickness round understructure. f) Gable ends shall be fitted to the Worktop with KD-Fittings and shall be provided with 2 Nos. of glide screws for levelling of the workstation. g) All straight edges shall be provided with hot pressed 1mm thick PVC edging of approved brand and manufacture using special hot melt glue at high temperature. h) One No. of 18mm thick Prelaminated Partical Board Modesty panel of approved brand and manufacture with clearence of 100-150mm from Finished Floor Level is included in the workstation. i) Side unit comprises of Access Flap with Metal Vertical Cable riser for wire management and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing of Main desk of HNI make - Model -Stellar of size 2400mm x 900 mm x 750 mm with side unit of size 1350mm x 600mm x 750 mm with following specification.a) Table with 30mm thick Prelaminated partical board of approved brand and manufacture, b) Finish top supported by 18mm thick PLPB gable ends and by CRCA steel of approved brand and manufacture Powder coated 1-1.2mm thickness c) Round understructure/pole with Prelaminated finish Modesty in front, Black Gable ends shall be fitted to the Worktop with KD-Fittings/brackets and shall be provided with 2 Nos. of glide screws for levelling of the workstation/table.d) All edges shall be provided with hot pressed 1.2mm thick PVC edging of approved brand and manufacture using special hot melt glue at high temperature.e) Black Postlam finish Modesty panel with clearence of 100-150mm from Finished Floor Level is included in the workstation.f) Return Table to have One No. Access Flap with Verticle Metal Cable riser for cable management and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing of Conference table of size 3750mm x 1200 x 730 mm of HNI make - Model -Ensemble Conclave with following specification. a) Table of Rectangular Shape made of 25mm thick Prelaminated partical board approved brand and manufacture, b) supported by CRCA Steel extruded Almunium understructure comprise of Powder Coated Elliptical Legs interconnected by CRCA Steel Powder Coated Cable Beams of approved brand and manufacture. c) All the edge of worksurface shall be provided with machine pressed 1.2mm thick Polyvinyl Chloride (PVC) lipping of approved brand and manufacture d) Glued with hotmelt glue. e) Access Flap,Verticle Duct & Cable Beams shall be provided for wire management facilities and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing of round cafe table of 1200 mm dia consisting of HNI make - Model -Ensemble round with following specification. a) Table Top in Round Shape made of 25mm thick Prelaminated partical board of approved quality and manufacture, b) Supported by CRCA Steel with Almunium extruded understructure comprise of Powder Coated Round Pole Leg, c) Connected by CRCA Steel Powder Coated Top and Base Plate made of CRCA Steel of approved brand and manufacture duly powder Coated. d) All the edge of worksurface shall be provided with machine pressed 1.2mm thick Polyvinyl Chloride (PVC) lipping of approved brand and manufacture glued with hotmelt glue complete as directed by the Engineer-in-Charge. Note: Table shall be without any wire management facilities

Supplying, transporting, loading, unloading and installating of Bed of HNI make - Model -Siesta Bed of size 2000x 900 mm with following specification. a) Top & Side Panels of the bed made of 18 mm thick Pre-laminated Particle Board of approved brand and manufacture (OSL/BSL as per requirement) b) Fixed on frame made out of M. S. tube of approved brand and manufacture of size 25mm x 25mmx 1.2mm Thick. c) The bed shall have four legs made out of M.S. tube of approved brand and manufacture of size 50mm x 25mm x 1.2mm thick. d) The leg shall be covered infront by Head & Foot rest Panel made of 18mm thick Pre-laminated particle board of approved brand and manufacture (OSL/BSL as per requirement). e) Prelaminated Particle Board shall be Grade II Type II conforming to IS:12823 :1990. f) Decorative Matching PVC Lipping of approved brand and manufacture of 1.2mm thickness shall be provided on all the edges of bed. g) All Metal Parts/M.S. tube shall be Powder Coated with minimum 45 microns thickness. h) Head Rest Height shall be 900mm & Foot Rest Height shall be 450mm and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing Sofa Cum bed of Durian make with fabric modernist classic design lounge seating sofa cum bed size is 1530mm in length x850mm(width)x 880mm(height) with following specification.a) kiln-dried wood framing makes it warp and scratch resistant, comfortable seat depth & height , wrapped in buttery-soft fabric, the panelled back and cushioned armrests encourage lounging, designed with modernity & elegance.b) Construction of two seater sofa cum bed, fully made in fabric material structure are made in moisture content shall be less than (10-12)%.c) Thickness of plywood used shall be 12 mm grade is 303 Indian standard for commercial and moisture proof plywood of approved brand and manufacture.d) Seat material shall be of slab stock foam & density - base 28 kg/m3 and super soft 32 kg/m3 at top pocket spring of diameter 2 mm is emebdded in seat & back. e) Bed based in understructure metal frames are finished in epoxy polyester black powder coated to the thickness of 50-60 microns(+/-5 micron) to provide aesthetic appeal. f) The front of the backrest is made of loose conjugated polyester fibre which is weighed & filled in the upholstery to make the required cushion. g) Webbing material shall be of spring of wire diameter of 3.8 mm mechanism.It is made up of mild steel linkages which are riveted together. h) The reclining pull out and push back mechanism optimizes space when the sofa is converted into bed,smooth mechanism which can be converted into bed or sofa with ease without any effort is tested for 180 kg load. i) It complements the modern pvc legs bushes fitted at the bottom surface of reclining mechanism.( Seat : 1290 mm(l) x 490 mm(d) x 470mm(h) , back height @ 430mm ) & when the sofa is converted in to sofa cum bed the depth shall be 1880mm and as directed by Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing Reception Counter of Durian make of size 2400 mm in length , 600mm in width and 750 mm in height with following specification. a) Extra top 10mm thick glass counter top with stainless steel studs of approved brand and manufacture b) Made of prelaminated particle board of approved brand and manufacture in asian maple color, with powder coated 0.8mm thick metal breathable mesh modestly in curve shape and as directed by the Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing Recliner 9 Leathererette) of one seater Overall Size : Width : 830 mm, Depth : 740 mm, Height : 1000 mm of Godrej make - Model - Rhine with following specification. a) Seating Height : 440mm stitching thread :nylon 40 tktpitch: gap 2 mm from border + pitch 6 per inch leather/pvc/pu/fabric:full pu leatherette. b) Frame material (tropical wood / pine wood/ rubber wood):rubberwood of approved brand and manufacture with moisture content :12 – 14 %. c) Seat foam: (density, type) :24 density foam + pocket spring (49 nos. of dia 50 mm / seat) d) spring rod dia =1.6 mm+ 24 density foam. e) back foam: (density, type) :24 density foam + polyester fabric (recron). f) armrest foam: (density, type) :24 density foam and as directed by the Engineer-in-Charge.

Supplying transporting, loading, unloading and installing storage with 1 door and PLU locker of size :- 450mm(W) x 470mm(D) x 1950 mm(H) of Godrej make - Model - 1 Door Personal Locker Unit with following specification. a) Height should be including leveller, height of leveler is 50 mm and adjustment shall be be 15mm, b) construction & material shall be aesthetically appealing completely knock down construction. c) The add-on units are stack widthwise to form a row of Lockers. (Note- Single Main unit should not be offered. Minimum 1Main + 1Add on to be offered, Maximum 1Main + 4 Add on to be offered) d) Legs fitted with screw type leveller made from CRCA of approved brand and manufacture e) combination of Top panel(0.5mm CRCA), f) side panel(0.5mm CRCA), g) Bottom panel(0.5mm CRCA), h) Back panel(0.5mm CRCA), i) Top and Bottom stiffner(1.2mm CRCA) and j) End Cover(0.5mm CRCA). CRCA shall be of 'D' Grade as per IS-513. k) The doors (without envelope slot) made from 0.6mm thick CRCA (D Grade, IS-513). l) Hinge shall be soft closing, door should have envelope slot with cover made of plastic label paper, for 4 door locker hinge of size 373mm (W) x 18 mm thick x 473 mm(H). m) Shelving should be 10 bend panel made of 0.5mm thick CRCA (D Grade, IS-513). n) The locker should withstand uniformly distributed load capacity of each shelf is 20 kg. o) 3 shelves for 4 door locker without envelope slot. p) Lock option shall be cam lock - oval knob that functions as a handle, click action mechanism, key removal in locked and unlocked position. q) The lock shall be made of zinc alloy die cast housing and finish shall be Epoxy Polyester Powder coated to the thickness of 50 microns (+/- 10 micron) and as directed by the Engineer-in-Charge.

Supplying , transporting, loading, unloading and installing of Corner table of Godrej make - Model - Splenda with following specification. a) Overall Size : Width : 600 mm Depth : 600 mm Height : 450mm b) approved tempered glass of 8mm thick, c) Solid rubber wood legs and frame, d) Bottom shelf made of MS Sheet. DECORATION MATERIALS (DENSITY / TYPE) shall be a) PU coating to the rubber wood parts, b) Clear glass Rubber wood understructure with 12 mm tempered glass of approved brand as top. c) MS sheet at the base, with a laser-cut floral design, can be used as a display shelf. d) Tapered legs with enhanced aesthetics and as directed by the Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing vertical drawer unit of Godrej make - Model - 4 drawer filing cabinets which uses less floor space with following specification.a) Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA of approved manufacture . b) It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. c) The Top, Side & Drawer Front thickness should be 0.7mm. d) The Frames, Drawer-inside cover and Side Back thickness should be 0.6mm. e)The Back, Bottom and Drawer thickness should be 0.5mm. f) Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. g) There shall be a Snap on type plastic label holder on Drawer Fronts. h) In addition, 28 ‘Ezee’ / ‘Visa’ files (Fullscape) from front to back of thickness 20mm per drawer can be hanged in VFC. i) The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. j) The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. k)The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). l) Plain Triangular plate pop should be riveted at the bottom corners for rigidity. m) Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. n) The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10) and as directed by the Engineer-in-Charge

Supplying, transporting, loading, unloading and installing Gliding file track system of Godrej make - Model - VSDU8 of size 900mm(W)x450mm(D)x1830mm(H) with following specification. a) The top shall be Metal top (1 mm add in unit height ) .b) The Rigid Knock Down Construction , Back , Sides and Door shall be made from 0.7 mm high yield strength CRCA of aprpoved brand and manufufacture ,rest in 0.8 mm CRCA . CRCA - 'D' Grade as per IS-513 . c) Sliding door arrangement shall have sliding door with top hanging arrangement to prevent derailment . d) Each door shall be provided with 2 plastic roller having steel ball bearing for smooth movement of door & less noise .e) VSDU-8 shall have glass door for visibility of the content . Locking shall be 5 lever cam lock for safe locking . f) Handle shall be plastic flush & recessed handle . g) Shelving shall have Height wise adjustable shelf mounting to sustain a Uniformly Distributed Load Capacity of the shelf is 40 Kg maximum. h) VSDU - 8 shall have 4 no. of adjustable full shelves.i) Accessories optional shall be cradle with pipes for hanging instadex files. j) Leveller shall be screw type leveller with hexagonal plastic base and overall finish shall be epoxy polyester coated to the thickness of 50 microns. k) For VSDU 8 - A4 size box file can be stored vertically on four shelves and clear space above fifth shelf is 220 mm and as directed by the Engineer -in-Charge.

Supplying, transporting, loading, unloading and installing of office Table of Godrej make - Model - Enzo of size 1200 Width mm x 600 Depth mm x 750 Height mm with following specification . a) The table top shall be made of pre- laminated particle board of approved brand and manufacture with 18 mm thick and 15 mm thick understructure covered with PVC lipping . b) There shall be locking provided for top drawers only , attractive black colour handles for all drawers plus only one colour is available beech. c) It shall have only 1 drawer attachment and as directed by the Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing Magazine/book holder of Godrej make - Model - 4 door book case of Display storage with following specification.a) Side panels, Frame & Cross L bracket are made using 0.8 mm CRCA of approved brand and manufacure (IS:513). b) The assembly consists of 2 tie rods, 4 fixing brackets and 2 turnbuckles. The tie rods are fixed in a shape of ‘X’ The tie rods are made of 4mm diameter rods of MS while fixing brackets are made of 2mm thick. CRCA IS:513 Grade. c) Optional wooden panel of 25mm thk PLT, E1-P2 grade board for PLT ref. Specification - FF04/DSN/STD/101, edges shall be provided with machine pressed 2 mm thick PVC lipping glued with hot melt EVA glue. d) Under Structure - Under structure is made of 0.8mm CRCA (IS:513). Sizes of under structure for single body :The size of shelves shall be 1200 mm (W) x 295mm (D) x 80mm (H) Shelves e) Shelves used are 10 bend panel made of 0.8mm CRCA (IS:513). f) Shelf panels are placed on shelf support and then fixed using nut and bolts from below. g) Standard config. consists of 6 loading levels formed by 5 no of adjusted shelf for each main and add on unit. h) Uniformly Distributed Load Capacity per each shelf is 80 Kg maximum.i) Construction- Completely Knock down construction.j) All Finishing shall be MS sheet metal and metal frame components are powder coated with epoxy polyester powder of min 45 microns thickness. k) Stackability- The add-on units can be stacked width wise to form a bank of racks having common side panel up to 4800 mm (W)l) Shelves back stiffener shall be at the rear side of the shelves back stiffeners are provided. These act as separators made of 0.8mm THK CRCA (IS:513).m) Label Holder -It is an aluminum extrusion of length 296mm for single body bookrack , fitted to front of body. n) The Paper is 300GSM matt finish, to be inserted into the aluminum extrusion.o) The length of paper is 296mm for single body bookrack.p) Optional Accessory - Rollout shelf: Rollout shelf accessory is a pull-out tray which has 2 nos. C shaped brackets of 1.2mm thk. Firmly mounted on shelf support with adjustable height.q) Slides are then fixed on these C brackets and rollout shelf assembly is mounted on the slides.r) This shelf opens outwards up to 250mm & should have load capacity of 40 KG UDL.s) Book separator is made of 2mm thk. CRCA sheet (IS:513) and is used as a partition and support for books placed vertically on a shelf and as directed by the Engineer-in-Charge.

Supplying, transporting, loading, unloading and installing bunk bed of size 1753mm in width, 2083mm in Depth and 1981mm in Height, bed shall be single of Godrej make - Bunk Bed with following specification. a) The make shall be of alder wood with finish in white paint of approved brand and manufacture. b) With 2 year warranty and as per the directions of Engineer-in-charge.

Supplying, transporting, loading, unloading and installing Fire Proof Safe of Ozone make - model Ozone Fire Warrior of volume 145 Litres, Electronic safe locker of size (600Wx570Dx985H) for home and office with following specification. a) Lock type : Pin code Key access, b) Colour:Green, c) Material : Steel, d) Capacity: 145 Litres, e) Weight : 220 KG with automatic locking system, f) Code hiding option, 03 Wrong code inputs consecutively puts safe in a secure mode resulting into 1 minute beep sound alert, g) Heavy Duty bolts to secure the door in place and vault style door and hinges, h) Low battery indicator, i) The product should confirm to UL test standards, j) Door opening angle 180 degree, combination of electronic locking and manual key, k) Special fire-proof stuffing material (cellulose concrete) seamless moulded case, User code with manual key or master code with manual key of approved brand and manufacture and as directed by Engineer-in-charge.

Supplying, transporting, loading, unloading and installing Coffee Table of Stylespa / Zuari make - Model 330076 with following specification. a) size 1200(width) x752(Depth)x422(Height) b) with Engineered wood of Teak walnut shade c) weight: 35kg of approved brand and manufacture and as directed by Engineer-in-charge.

Supplying, transporting, loading, unloading and installing PA Lecturn system of Ahuja make - Powdered Mixer Woofer Ahuja ASL 3000R with following specification. a) 3000R 90 WATTS AC Operation Portable PA LECTERN SYSTEM with b) Power Output 90 Watts Max; 60 Watts Rated, c) Input Channels Mic-1(Goose neck Mic): 8mV, Mic-2: 5mV, Line: 100mV, Aux : 200mV, d) Frequency Response: 50-16,000Hz, Tone Control: Bass ±5dB at 100Hz, Treble ±5dB at 10kHz, e) MIX Output: 775mV, Digital Player: MP3 recorder player with USB, SD, MMC card & Bluetooth, f) USB Charger Outlet: DC 5V, 1A, g) External Speaker Impedance: 4Ω to 8Ω, h)Power Supply: AC 220-240V, 50/60Hz, i) Power Consumption: AC 100VA, j) Dimensions: W580 × H1150 × D420 mm, k) Weight: 18.20 kg approx., MICROPHONE: Handheld Transmitter, a) Microphone Element: Dynamic, Cardioid, b) RF Output Power: 15mW (max.), c) Frequency Response: 50 - 15,000Hz, d)Power Requirement: 3V (2x1.5V AA Pencil Cells), e) Current Consumption: 100 mA, f) Dimensions: Ø55 × L248 mm, g) Weight: (w/o battery) 180g. of approved brand and manufacture and as directed by Engineer-in-charge.