Bengaluru Water Supply And Sewerage Board Tender

ABC4 - 1.1 kV, LT Aerial Bunched Cable, XLPE insulation confirming to IS-14255: 1995, 2x16 + 1x25 Sqmm (Insulated Messenger cum Neutral)

ABC5 - Labour charges for Stringing of 1.1 kV grade Aerial Bunched 3 Core cable of XLPE insulation of size (3x95) (Phase Conductor) + (1x70) (Insulated Messenger Neutral) + (1x16) (Street Light Control)

ABC6 - Suspension Clamp suitable for insulated Messsenger wire of size 25 to 95 Sqmm

ABC7 - Labour charges for Erection of Suspension Clamp - 25 to 95 Sqmm insulated messenger with bracket

ABC8 - Piercing Connector Suitable for 16 Sqmm - 95 Sqmm AB Cable - Service Connection

ABC9 - Labour charges for Installation of Insulation piercing connector for Main to Service Line Main : 16- 95 Sqmm, Tap: 4-35 Sqmm (P2X95)

ABC10 - Piercing Connector Suitable for 16 Sqmm - 95 Sqmm AB Cable - Street Light Connection

ABC11 - Labour charges for Installation of Insulation piercing connector for Main to Street Light Main : 16- 95 Sqmm, Tap: 1.5-10 Sqmm (EP95)

ABC12 - Universal Hook and Bolt & Nut

ABC13 - Labour charges for Fixing of Universal Hook

ABC14 - Dead End Clamp / Anchor Clamp Assembly 25 to 95 Sqmm Bare Messenger (Exclusive of Pole Clamp and Eye Hook)

ABC15 - Labour charges for Erection of Anchor Clamp - 25 to 95 Sqmm bare messenger

ABC16 - Pre - Insulated Lug - CPTAU for 95 Sqmm

ABC17 - Labour charges for Installation of Pre-Insulated Lug - CPTAU for 95 Sqmm

ABC18 - Pre - Insulated Lug - CPTAU for 25 Sqmm

ABC19 - Labour charges for Installation of Pre-Insulated Lug - CPTAU for 25 Sqmm

ABC20 - Pre - Insulated Lug - CPTAU for 16 Sqmm

ABC21 - Labour charges for Installation of Pre-Insulated Lug - CPTAU for 16 Sqmm

ABC22 - Tee - Connector - KZ3 95

ABC23 - Labour charges for T-Connector KZ3 95

ABC24 - End Cap for 50/70 Sqmm (Accessories for AB Cable)

ABC25 - End Cap (Covered Conductor and Accessories)

ABC26 - Nylon Cable Tie (100 Nos)

ABC27 - Pole Clamp for HT/LT AB cable

ABC28 - Labour charges for Pole Clamp-145 mm x 95

ABC29 - Eye Hook (Flat Type) for fixing Clamp

ABC30 - 1.1 KV Class HR (Heat Resistant) PVC Insulated & UnSheathed Aluminium Wires Multistrand Single Core Lead wires as per IS-694: 2010 PVC Wire - 25 Sqmm Al Wt: 6.7 Kg, Total Wt: 11.5 Kg/100 Mtr Coil

ABC31 - GI Pipe B - Class as per IS-1239 GI Pipe - 63 mm Dia

ABC32 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 35 to 95 Sqmm

ABC33 - Single Phase Distribution Box for 10 Connection

ABC34 - Labour charges for Distribution Box suitable for 20, Single Phase Connection

ABC35 - Three Phase Distribution Box for 05 Connection

ABC36 - Labour charges for Distribution box suitable for 6, 3 Phase Connection

ABC37 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 16 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm)

ABC38 - Digging of Pit 1.8 Mtr depth for errection of 9 to 10 Mtr Long Steel/RCC/PSCC supports as per approved Drawing. Ordinary Soil

ABC39 - Providing cement concrete to Poles and Guy sets with material and labour including necessary curing etc., complete (cost does not include excavation) A) Base Concreting with CC 1:4: 8 a) Pole base for 11/9.5/9/8 Mtr supports (500x650x150mm)

ABC40 - Providing cement concrete to Poles and Guy sets with material and labour including necessary curing etc., complete (cost does not include excavation) B) Pole Concreting with CC 1:2:4 (without coping) a) 9 Mtr Pole (650x500x1700mm)

ABC41 - UG Cable Work: Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards and Lighting, Using sight Rails and Sign Boards at every 100 Mtr wherever necessary as directed. In Ordinary Soil

ABC42 - Refilling the cable trenches with selected available earth from trench excavation including watering, consolidation in layers of 15 cm. Thickness including depositing of the surplus earth with a lead of 200 Mtr

ABC43 - Cutting of Road surface for cable trenches and disposing of the excavated earth, as directed including Barricading, Danger Lighting then Refilling the Cable Trenches. - Tar Road

ABC44 - Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT Cable 2.5 to 25 Sqmm

ABC45 - Releasing of Conductor Rabbit

ABC46 - Released Pole: Loading and unloading of Pole (loading of Pole to vehicles at stores and unloading at workspot) NOTE:- Consolidated amount for both loading and unloading 9 Mtr RCC/PSCC Pole

ABC47 - Rod Type Earthing: Rod type of earthing using 40 mm Dia, 3 Mtr long MS rod as ground rod, in earth pit of 300 mm width and 3300 mm depth and using 50x6 mm flat welded to ground rod as terminal & connected to equipment ground terminal using PVC Al wire as specified

ABC48 - Bentonite clay slurry for earthing in 50 Kg Bag

ABC49 - Guy Set Complete with No. 8 Strain Insulator & Concreting materials - Material Portion

ABC50 - Guy Set Complete with No. 8 Strain Insulator & Concreting materials - Labour Portion

ABC51 - Guy concreting with Boulders, Mud and Sand

ABC52 - Supply of LED Streetlight luminaire with pressure diecast aluminum housing body for optimal thermal dissipation. Lamp compartment comprising of anti-glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr @Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT Greater than 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than 0.9 with mains, Surge Protection Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50 or 60Hz application. Compliance to IS 10322/IEC60598, LM79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access streetlight with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Streetlight fixture with 120 W power consumption. LED Efficiency greater than 1301m/w, nominal CRI greater than 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO9001:2008. Housing with supplier wordmark/name shall be Engraved /Embossing on the diecast housing/ Body part. Warranty of 2Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source

ABC52 - Work of supply, erection and commissioning of indoor upto 250 Amps distribution panel as specified below: Supply, erection and commissioning of Indoor type upto 250 Amps MCCB distribution panel with outgoing copper bus bar, having, accessories like MCCB, incoming and outgoing entry bus bar, ammeter voltmeter, ammeter selector switch, LED indication lamp, and with suitable M.S box with required stand unit set. Suitable for Indoor type complete as per latest IS standard specification.