Bengaluru Water Supply And Sewerage Board Tender

A03 - Providing, filling and laying of sand bags filled with sand / clay for diversion of sewage during execution of work

A04 - Dewatering the sewage / storm water by using reqired HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump.20 hp pump

A05 - Excavating of ramming/jacking/driving pit and receiving pit of size 5.00m(length) x 3.00m (breadth), up to 6.00 m depth in all soil strata including shoring and strutting including cutting of Asphalt/CC/Macadam road surface and removing the excavated stuff with all lead and lifts. The work includes formation of CC/RCC of 1:3:6 with or without 20mm steel with suitable spacing. The work also to receive the impacts driving pushing operation of encasing pipe. The cost includes driving the horizontal bore by pushing/jacking methods (trenchless technology method) by using construction agencies' cranes, jacks, jacking materials, generator, welding machineries, compressor, jack hammer and other equipments etc., without interfering and causing any hindrance to the movement of traffic or any other vehicles, without any disturbances to the railway/road/canal formation etc., The cost also includes bailing / pumping of water where ever necessary without affecting any installation like water supply and sanitary pipeline/telephone cable, electric cables etc. The work comprises of water for curing, carriage and fixing charges, concrete up to plinth for erecting and conducting the hydraulic pushing arrangements apart from passing through and scooping the earth inside the pipes and pit and depositing and disposing the surplus earth to a designated/ approval place and levelling the site after completion of entire work as directed by Engineer in Charge. The rate is excluding the cost of MS pipes Size up to size up to size up to 5 mts X 5 mts - depth up to 7 mts

A06 - Installation of product pipe by manual jacking method - Manufacturing, providing, transporting, rolling, lowering, laying & jointing, testing, commissioning of ERW (Electric Resistance Welded), SAW (Submerged Arc Welded) MS pipe (Fe-410 grade) conforming to IS 3589-2001 with latest ammendments including perfect linking welding of joints to correct position including cost and conveyance of pipes and materials with all lead ,lift, cost of labour, loading and unloading of pipes for the following diameters with specified thickness of plate as noted below including bailing out of water wherever necessary for laying of carrier pipe of suitable dia including inside and outside of casing pipe painted with two coats of Anti corrossive tankmastic paint. Installation of steel pipe by Ramming / Jacking method to cross Railway track / NH /BDA /BBMP/ Other roads/Existing utilities / NALA crossings, filling the gap between casing pipe and carrier pipe with quarry grit using compressor with all necessary equipments, plants etc, complete. Suitable spacers of HDP/ MS or other similar material should be provided in between carrier & casing pipe to prevent carrier pipe forming metallic contact with casing pipe. Note : a. The cost of jacking is inclusive of cost M.S. casing pipe of specified thickness b. The cost of carrying pipe is separate and provision shall be made as per site requirement c. The cost of Jacking includes all leads lifts, cost of consumables, fuel charges, labour. d. The cost of jacking and receving pits shall be proposed seperatelly as per site requirement.Jacking of Jacking of 2200 mm dia & 20mm thick M.S. Casing Pipe