Bengaluru Water Supply And Sewerage Board Tender

001 - Dismantling of Flexible pavements and disposal of dismantled materials and stacking serviceable and unserviceable materials separately By Mechanical MeansBituminous course. ---- Assessed available tender capacity should be (AN2.5)-B should be greater than the amount put to tender.( The supporting document for value of A should be mandatorily uploaded.Contractors should have registration in BWSSB or KPWD/KUWSDB, etc. as per KTPP act.The form of tender as per the proforma available bid document should be duly filled and uploaded in the e-procurement portal as a part of tender document which is mandatory.Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

002 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata.All kinds of soils. Depth upto 1.50 m ---- Assessed available tender capacity should be (AN2.5)-B should be greater than the amount put to tender.( The supporting document for value of A should be mandatorily uploaded.Contractors should have registration in BWSSB or KPWD/KUWSDB, etc. as per KTPP act.The form of tender as per the proforma available bid document should be duly filled and uploaded in the e-procurement portal as a part of tender document which is mandatory.Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

003 - Providing lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber rings (seals according to EN 681 & ASPM 425) The rubber seals joints pipe will have groves in interior of socket and exterior of the spigot. The rubber gasket shall be prefixed at the factory by the manufacturer rigidly with approved glue to have leak proof joint including conveying of pipe to work site and rolling and lowering into trenches, laying true to line, level and perfect linking at joints testing and commissoning including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of GSW pipes and specials, with rubber gaskets conforming to EN 681 and ASTM C-425 including cleaning the socket and spigot with soap solution and applying talcum powder for detecting crack, then applying glue and before inserting of rubber gaskets, jacking and fixing in perfect condition including the cost of soap solution, talcum powder and glue etc. and giving necessary hydraulic test to the required pressure of water head with all lead and lifts including costing of jointing materials and all necessary survey works for laying of sewers etc., and disposal of debris as directed etc., complete. (Contractor will make his own arrangements for procuring water for testing) with Rubber ring gasket joints .230mmdia SW pipe. ---- Assessed available tender capacity should be (AN2.5)-B should be greater than the amount put to tender.( The supporting document for value of A should be mandatorily uploaded.Contractors should have registration in BWSSB or KPWD/KUWSDB, etc. as per KTPP act.The form of tender as per the proforma available bid document should be duly filled and uploaded in the e-procurement portal as a part of tender document which is mandatory.Amount put to tender is excluding GST. Rates quoted shall be excluding GST.