Bengaluru Water Supply And Sewerage Board Tender

002c - for Depth exceeding 3.0 m, but not exceeding 4.50 m ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

003 - Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. 400mm dia RCC Np3. ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

004 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005a - Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.H: 1.2m dia for 1.30 mt depth manhole NMH 15 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005b - for 1.40 mt depth manhole NMH 6, 14 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005c - for 1.50 mt depth manhole NMH 4, 5, 7, 12, 16 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005d - for 1.60 mt depth manhole NMH 8, 10, 11, 17 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005e - 1.70 mt depth manhole NMH 2, 3, 9 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005f - for 1.80 mt depth manhole NMH 13, 18 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005g - 2.20 mt depth manhole NMH 19 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005h - for 2.70 mt depth manhole NMH 1 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005i - 2.80 mt depth manhole NMH 20 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

005j - for 3.50 mt depth manhole NMH 21 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

006 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

007 - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/m2 using mechanical means ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

008 - Providing and laying Bituminous Macadam with 120 tph capacity hot mix plant batch type using crushed aggregates of specified grading premixed with bituminous binder VG-30 @ 3.3% by weight of mix, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

009 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

010 - Providing and installing at site of work P.V.C. pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proof including jointing of approved type with all labour charges and all lift charges, handling charges including encasing the pipe around to a depth not less than 15 cms with gravel or selected earth available from the excavation etc. complete ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

011 - Supply and delivery at site special moulded variety PVC bend as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC BEND ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

012 - Supply and delivery at site special moulded variety PVC reducer as per IS 7834/ 1987 and fabricated as per IG124/ 1984 with ISI mark with its latest amendments 110 mm dia PVC REDUCER ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST

013 - Dewatering the sewage / storm water by using reqired HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump 10HP ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST