Bengaluru Water Supply And Sewerage Board Tender

No4 - 3.00 to 4.00 mtr. Depth.

No5 - Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey: RCC NP3 Class pipe of 400mm Dia.

No6 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cm in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m. Including cost of all labour complete as per specifications

No7 - Wet Mix Macadam (Plant Mix Method) Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

No8 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. (Vol. 1 SR 2023-24, P.No. 15, I. No. 2.1.4) Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates

No9 - Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing, barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de- watering, engraving Machinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia Circ. B M.H: a)0.90 Mtsdepth & SFRC cover & frame

No10 - 1.00 m depth

No11 - Upto 1 to 2m depth

No12 - 2.00 m depth

No13 - Upto 2 to 3m depth

No14 - Dismantling the damaged or collapsed Machinehole ,conical in shape, and reconstructing the same for the same dimensions, with machine made wire cut brick in CM 1:4 with ordinary portland cement etc. as per design and specifications. The existing ring, cover and CC beeding to be used. For 1.2M dia .a)3.50mtr depth

No15 - Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work

No16 - Conducting Topographical GIS survey for the proposed Water Supply / UGD scheme to the city / town with latest total station survey equipments. The work shall include collection of field data from local body, conducting detailed survey showing the all important land marks, existing water supply lines, sewer lines, all roads, levels, nature of roads, L-section survey for transmission main/ feeders/sub-feeder/ rising main from Jack well to WTP and WTP to OHT’s and distribution network inlcuding clearing the obstructions, with all survey staff required covering all the developed & newly developed layouts or L-section survey for Sub-Main/ Mains/Trunk Sewer/Rising main from wetwell to STP inlcuding clearing the obstructions, with all survey staff required covering all the developed & newly developed layouts with submission of Soft copy of drawings along with source file and Hard Copy in 3 sets for the following