Bengaluru Water Supply And Sewerage Board Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Bengaluru Water Supply And Sewerage Board - BWSSB Tender
Electrical and Electronics
Electrical Works
Opening Date27 Nov 2024
Closing Soon5 Dec 2024
Tender Amount₹ 1,55,75,811.9
Costs
EMD
₹ 2,34,000Document Cost
Refer DocumentsTender Fee
₹ 3,900
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
BWSSB/2024-25/EL/WORK_INDENT1788Tender No
BWSSB/2024-25/EL/WORK_INDENT1788Tender Authority
Bengaluru Water Supply And Sewerage Board ViewPurchaser Address
-Website
http://kppp.karnataka.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
code04 - Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. ---- Tenderer should quote the rate excluding GST
2051.1
147
301511.7
code05 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer inCharg ---- Tenderer should quote the rate excluding GST
6
4478
26868
code06 - Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. G.I. pipes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge ---- Tenderer should quote the rate excluding GST
199
183
36417
code07 - Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. ---- Tenderer should quote the rate excluding GST
20
2633
52660
code08 - Providing and fixing ball bearing for rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. ---- Tenderer should quote the rate excluding GST
4
403
1612
code09 - Extra for providing mechanical device chain and crank operation for operating rolling shutters: Exceeding 10.00 Sqm and upto 16.80 Sqm in the area including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer inCharge ---- Tenderer should quote the rate excluding GST
20
987
19740
code10 - Extra for providing 2 HP Mild Steel Auto Reverse Shutter Gearbox for operating rolling shutters including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. ---- Tenderer should quote the rate excluding GST
1
24686
24686
code11 - Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer in charge, (area of grill to be measured) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. ---- Tenderer should quote the rate excluding GST
2.5
617
1542.5
code12 - Providing and fixing T iron frames for doors, windows and ventilators of mild steel Tee sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer: Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 5x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. ---- Tenderer should quote the rate excluding GST
500
124
62000
code13 - Providing and fixing M.S. rivets of sizes in position including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge ---- Tenderer should quote the rate excluding GST
70
201
14070
code14 - Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 40 x 40 x 6 mm ---- Tenderer should quote the rate excluding GST
40
305
12200
code15 - 75 x 150 x 75 x 6 mm C channel ---- Tenderer should quote the rate excluding GST
20
926
18520
code16 - Providing and fixing corrugated G.S. sheet roofing including vertical or curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontalor vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge0.63 mm thick with zinc coating not less than 275 g per sqm ---- Tenderer should quote the rate excluding GST
91
879
79989
code17 - Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 sq. decimeter: 0.63 mm thick ---- Tenderer should quote the rate excluding GST
8
350
2800
code18 - Providing and fixing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete as per design drawings.
1.60 mm thick with zinc coating not less than 350 g per sqm ---- Tenderer should quote the rate excluding GST
22
2063
45386
code19 - Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 m3in volume and stock piling at designated locations and disposal of dismantled materials and stacking serviceable and unserviceable materials separately ---- Tenderer should quote the rate excluding GST
15.05
563
8473.15
code20 - Dismantling of kerb stones by mannual means ansd disposal of dismantled materials with all lead and lifts ---- Tenderer should quote the rate excluding GST
30
22
660
code21 - Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings and bridges and such simillar works in all kinds of soils, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, excavated surface leveled and sides neatly dressed disposing off the excavated stuff or sorting and stacking the selected stuff for reuse in a radius of 50 m and lift upto 1.5 m including cost of labour, tools and other appurtenaces required to complete the work.
in all kinds of soils Depth upto 1.5 m ---- Tenderer should quote the rate excluding GST
175.5
242
42471
code22 - Depth exceeding 1.5m, but not exceeding 3 m ---- Tenderer should quote the rate excluding GST
175.5
259
45454.5
code23 - In ordinaryorsoft rock without blasting upto 1.5 m depth ---- Tenderer should quote the rate excluding GST
175.5
363
63706.5
code24 - Depth exceeding 1.5 m, but not exceeding 3 m ---- Tenderer should quote the rate excluding GST
50
425
21250
code25 - hard rock (blasting prohibited) Depth upto 1.50 m ---- Tenderer should quote the rate excluding GST
80
1014
81120
code26 - Depth exceeding 1.5 m, but not exceeding 3 m ---- Tenderer should quote the rate excluding GST
30
1120
33600
code27 - Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails and bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work etc., and all other appurtenances complete in the following strata. All kinds of soils. Depth upto 1.50 m ---- Tenderer should quote the rate excluding GST
90
262
23580
code28 - Dewatering Pump 10 HP ---- Tenderer should quote the rate excluding GST
150
230
34500
code29 - Providing, filling and laying of sand bags filled with sand or clay for diversion of sewage during execution of work. ---- Tenderer should quote the rate excluding GST
200
64
12800
code30 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paverorgrader in sub base or base course on well prepared surface and compacting with vibratory roller to achieve the desired density.
Pipe delivery ---- Tenderer should quote the rate excluding GST
40
2559
102360
code31 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The graniteortraporbasalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead and lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications.
Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates ---- Tenderer should quote the rate excluding GST
35.2
6243
219753.6
code32 - Providing and laying in position Ready Mixed or Batch Mixed concrete as per IS 10262 mix design procedure for Cement Concrete works in all types of Structures other than Road works, using coarse aggregate and fine aggregate derived from natural sources, Ordinary Portland Cement (OPC) at 75percentage and GGBS at 25percentage proportion, admixtures to accelerate or retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the Engineer in charge.
pump foundation ---- Tenderer should quote the rate excluding GST
19.25
6632
127666
code33 - Supply and placing the Design Mix of M 30 Grade for Self Compacting Concrete corresponding to IS 456 2000 (Re affirmed 2021) and relevant IS codes using Batching plant, Transit mixer and concrete pump with 12.5 mm size graded machine crushed hard metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, cement substitutes like fly ash, GGBS, etc., fine aggregate (sand), coarse aggregate, Admixture, water etc., to site including and sales and other taxes on all materials including all operational, incidental and labour charges, but excluding cost of steel and its fabrication and formwork charges for finished item of work with minimum cement content as per IS code including pumping and curing etc complete for finished item of work (RCC slabs, Beams, Columns, Lintels, Water Tanks, RCC Walls in Buildings). Upto 5m height
Raft equal 12 x 8 x 0.3, Wall equal 40 x 3 x 0.3, slab equal 5 x 8 x 0.3, collum equal 21.6, panel equal 7 x 8 x 0.3 equal 115.2Cum ---- Tenderer should quote the rate excluding GST
120
8200
984000
code34 - Supplying, fitting and placing TMT FE 550 or 550D Steel Reinforcement
including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, lapingorwelding joints, tying with binding wire or soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. Buildings ---- Tenderer should quote the rate excluding GST
18
89457
1610226
code35 - Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m ---- Tenderer should quote the rate excluding GST
100
266
26600
code36 - Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ---- Tenderer should quote the rate excluding GST
20
433
8660
code37 - Mobile Hydraulic Crane 5 t capacity ---- Tenderer should quote the rate excluding GST
60
828
49680
code38 - Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kgorm3 and minimum compressive strength of 4.00 Normm2 conforming to IS 2185 (Part I) 2005 and constructed with CM 1:4 as per IS 2572:2005 including cost of all materials, labour, scaffolding and curing, usage charges of machinery etc complete as per specifications. ---- Tenderer should quote the rate excluding GST
160
1310
209600
code39 - Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge) ---- Tenderer should quote the rate excluding GST
160
366
58560
code40 - Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brickor stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer in charge. ---- Tenderer should quote the rate excluding GST
160
429
68640
code41 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge ---- Tenderer should quote the rate excluding GST
280
100
28000
code42 - Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per specifications and as per directions of Engineer in charge ---- Tenderer should quote the rate excluding GST
160
26
4160
code43 - Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. equalBrick wall (40x4) conctrete wall ---- Tenderer should quote the rate excluding GST
280
137
38360
code44 - Finishing walls with textured exterior paint of required shade :New work (Two coats applied at 3.28 Lor10 Sqm) over and including priming coat of exterior primer applied at 2.20kgor10 Sqm to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer in charge Brick wall ---- Tenderer should quote the rate excluding GST
160
283
45280
code45 - Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed at 2 L per 50 kg of cement or as per direction of Engineer incharge. ---- Tenderer should quote the rate excluding GST
96
800
76800
code46 - Lettering with black Japan paint of approved brand and manufacture to give an even shade including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer in charge. ---- Tenderer should quote the rate excluding GST
10000
4
40000
code47 - Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass or stainless steel screws etc. complete as per architectural drawings and directions of engineer in charge: Pre laminated particle board with decorative lamination on both sides including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge. ---- Tenderer should quote the rate excluding GST
1.69
983
1661.27
code48 - Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber or neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in charge . (Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5 mm thickness (weight not less than 12.50 kgorSqm) including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Tenderer should quote the rate excluding GST
15.28
1171
17892.88
code49 - Filling the gap in between aluminiumor stoneor wood frame and adjacent RCCorBrickor Stoneor woodor Ceramicor Gypsum work by providing weatherorstructural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer in charge complete, complying to ASTM C920, DIN 18540 F and ISO 11600 Upto 10 mm depth and 10 mm width including cost of materials, labour, usage charges of machinery complete as per specifications. ---- Tenderer should quote the rate excluding GST
49.4
159
7854.6
code50 - Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sectionsor appropriate sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubberor neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing or paneling, C.P. brass or stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge. Glazing, paneling and dash fasteners to be paid for separately For shutters of doors, windows and ventilators including providing and fixing hingesor pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber or neoprene gasket required Fittings shall be paid for separately Polyester powder coated aluminium minimum thickness of polyester powder coating 50 micron including cost of materials, labour, usage charges of machinery complete as per specifications ---- Tenderer should quote the rate excluding GST
142
582
82644
code51 - Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- Tenderer should quote the rate excluding GST
3
990
2970
code52 - Providing and fixing chromium plated brass handles of 100or125 mm with necessary screws etc. complete ---- Tenderer should quote the rate excluding GST
2
237
474
code53 - Supply of brand new horizontally spilt case horizontal mounting type centrifugal pump with bronze impeller and capable of pumping filtered water contain 1 PPM suitable for coupling to motor on a common base plate. The pump should be as per ISI 1520of1960 or latest issue. The pump shall be provided with suitable necessary GI pipe stop cock, goose neck etc., on suction and delivery side of pump, cooling water disposal pipes. The pump shall give a discharge of minimum 450 m3orhr against a total head of 40m MWC and negative suction capacity of 5Mtr at rated speed of prime mover ---- Tenderer should quote the rate excluding GST
2
1046178
2092356
code54 - Supply of 1480Rpm,60KWor 75HP, duty S1, Induction motor horizontally mounting type screen protected drip proof with class B insulation for continuous duty squirrel cage induction motor capable to drive the above pump with sufficient margin of power and to operate on 3 phase, 50 Hz, 440 volts AC supply system. The motor shall confirm to relevant ISI 325. ---- Tenderer should quote the rate excluding GST
2
243601
487202
code55 - Accessories like Base Frame , Coupling, Foundation bolts, Pressure guages both on delivery and suction side of pump for each pump and other accessories etc. ---- Tenderer should quote the rate excluding GST
2
126137
252274
code56 - Supply of 250A LT panel, consist of 250A ACB incomer, 250A phase changeover switch, 2 nos 250A outgoing feeder to motor, 250A load selector switch, 2nos 100A outgoing feeder, 6nos 32A outgoing MCB, 3nos 40A outgoing MCB, 4nos 62A outgoing MCB, with Earth fault relay, digital ammeter, voltmeter, multifunction meter indoor type, cable entry bottom, aluminium cable gland plate. as per IS standards ---- Tenderer should quote the rate excluding GST
1
485000
485000
code57 - Supply of 75HP Digital soft starter consist of Motor protection relay, undervoltage, over voltage, phase reverse, under current, over current protections, floor mounted and cable entry bottom, indoor type panels ---- Tenderer should quote the rate excluding GST
2
375000
750000
code58 - Supply erection and commissioning of 75KVAR APFC panel and its allied works ---- Tenderer should quote the rate excluding GST
1
220000
220000
code59 - Erection and commissioning of pumpsets ---- Tenderer should quote the rate excluding GST
2
75000
150000
code60 - Erection and commissioning of LT panel and starter 2 nos ---- Tenderer should quote the rate excluding GST
1
140000
140000
code61 - Supply and installation of Electrical operated DI Sluice valve with actuator and accessories For sluice Valve of PN 16.0 and 300mm ---- Tenderer should quote the rate excluding GST
2
435000
870000
code62 - Supply and installation of Electrical operated DI Sluice valve with actuator and accessories For sluice Valve of PN 16.0 and 200mm ---- Tenderer should quote the rate excluding GST
2
305000
610000
code63 - Supply and installation of Electrical operated DI Sluice valve with actuator and accessories For sluice Valve of PN 16.0 and 150mm ---- Tenderer should quote the rate excluding GST
2
269000
538000
code64 - Providing and fixing of Singleor Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40or 50. All internal parts such as float, shell with appurtenances., all cover bolts of austenitic alloy or SS 304 steel, DN 50 float of HOSTAFLON or SS 304 and gaskers and seals of EPDM. Epoxy powder coating (EP P) inside and outside colour blue RAL5005. The valves should be designed for all the three functions i.e., 1. Large orifice for venting of large air volumes on start up. 2. Large orifice for intake of large air volumes. 3. Small orifice for discharge of pressurized air during operation for PN 10.0 etc complete For TP Air Valves of 100mm dia ---- Tenderer should quote the rate excluding GST
2
37079
74158
code65 - Providing and fixing of ductile iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nickel overlay micro finishedor Integral seat with body and disc in Ductile Iron in GGG 40or50 shaft of stainless steel and bearings of zinc free bronze and surface protection with epoxy liquid of GSK quality etc complete For PN 10.0 150mm dia ---- Tenderer should quote the rate excluding GST
2
30578
61156
code66 - Manufacturing, providing, transporting, rolling, lowering, laying, jointing and commissioning of ERW (Electric Resistance Welded)or SAW (Submerged Arc Welded) MS pipes of Outer dia (Fe 410 grade) conforming to IS 3589 2001 with latest amendments, including perfect linking and welding of joints to correct position, cost of the pipes, conveyance, lead, lift charges, cost of all labour and giving satisfactory hydraulic test as per IS 3589 2001 with latest amendments for test pressure and working pressure both at factory and site etc. complete as per detailed specifications inside with CM 1:1.5 lining of minimum 10mm thick for pipes up to 610mm OD and with minimum 12mm thick beyond 610mm OD and out side with minimum 25mm thick coating in CM 1:3 over 50 x 50mm weld mesh of 13 gauge, including loading and unloading of pipes for the following diameters and specified thickness of plate as noted below, including bailing out of water wherever necessary. (Contractor will make his own arrangements for procuring water for testing). Pipe of 323.9mm dia 8.7mm thick
Note: a) No Negative tolerance in respect of thickness is permissible. b) Basic Cost of MS Plate is considered as Rs.71,700or per MT c) The pipe costs are FOR destination anywhere in Karnataka ---- Tenderer should quote the rate excluding GST
30
8280
248400
code67 - Providing, fabricating and fixing at site various diameter MS MJ ends to suit CI or DI pipe as per the sketch . The cost is inclusive of all materials, i.e, rubber 'O' rings, flanges, bolts and nuts, consumables, hire charges, tools and tackles, welding equipments, lead and lifts, etc. complete as per the instructions of Engineer in charge For CI or DI pipes of 300mm dia ---- Tenderer should quote the rate excluding GST
2
4861
9722
code68 - Providing, fabricating and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire charges for tools and tackles, welding equipments etc. complete as per instructions of the Engineer in charge for:
Flanges of 150mm dia and 16mm thick ---- Tenderer should quote the rate excluding GST
12
1608
19296
code69 - Flanges of 200mm dia and 20mm thick. ---- Tenderer should quote the rate excluding GST
12
2688
32256
code70 - Flanges of 300mm dia and 20mm thick. ---- Tenderer should quote the rate excluding GST
12
4180
50160
code71 - Supply and installation of radar type level transmitter with remote Digital indictor with 4 20mA digital output for the GLR ---- Tenderer should quote the rate excluding GST
1
195000
195000
code72 - Supply and installation of Digital Pressure transmitter for the pump ---- Tenderer should quote the rate excluding GST
2
120000
240000
code73 - Supply and installation of Pressure guarge with digital output for the pump ---- Tenderer should quote the rate excluding GST
2
65000
130000
code74 - supply and installation of Scada based control panel for the pump operations and valve control and data storage etc, ---- Tenderer should quote the rate excluding GST
1
850000
850000
code75 - Supply and installation of CCTV with 30days storage facility for the pump house ---- Tenderer should quote the rate excluding GST
1
298000
298000
code76 - Supplying, erecting, testing and commissioning of ON LINE UPS system suitable for operation on 230V, 50Hz, AorC supply, with isolation transformer all accessories complete and Excluding batteries and wiring complete 5KVA ---- Tenderer should quote the rate excluding GST
1
68383
68383
code77 - Supplying, installation, testing and commissioning of 12V DC, AH batteries in poly propylene container for U.P.S. Sealed maintenance free batteries
100 AH capacity ---- Tenderer should quote the rate excluding GST
6
12430
74580
code78 - 2 mm thick perforated cable GI tray with on existing MS angle support using necessary GI boltsornuts and washer or welding as required. 150 x 50 mm ---- Tenderer should quote the rate excluding GST
20
463
9260
code79 - 300 x 50 mm ---- Tenderer should quote the rate excluding GST
30
587
17610
code80 - 11 kV, 3 Core, XPLE HTUG Cable withpressure extruded inner sheeth, ROUNDWIRE ARMOURED as per IS 7098 (Part 2)Armouring wires dia and Resistivity as per IS 3975 CSR 2023 24 Vol 6 Sl.No 254I,No 36.01 95sqmm,95 Sqmm, (54 GI Wires 2.5 mm Dia) ---- Tenderer should quote the rate excluding GST
0.28
889666
249106.48
code81 - Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff ---- Tenderer should quote the rate excluding GST
0.28
61322
17170.16
code82 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS 1554 (Part1) or IS 7098 Part 1, Armouring strip thickness and resistivity as per IS 3975
150 Sqmm, 3.5 Core, (25 GI Strips 4 x 0.8 mm ---- Tenderer should quote the rate excluding GST
0.1
554655
55465.5
code83 - 70 Sqmm, 3.5 Core, (18 GI Strips 4 x 0.8 mm ---- Tenderer should quote the rate excluding GST
0.2
317912
63582.4
code84 - 25 Sqmm, 4 Core, (13 GI Strips 4 x 0.8 mm) ---- Tenderer should quote the rate excluding GST
0.18
179844
32371.92
code85 - Laying of cable in Existing TrenchorGI pipeorStone WareorRCC Hume pipe using WoodenorAluminum Rollers as directed by the departmental staff
2.5 to 25 Sqmm ---- Tenderer should quote the rate excluding GST
0.18
20886
3759.48
code86 - 35 to 95 Sqmm ---- Tenderer should quote the rate excluding GST
0.2
31139
6227.8
code87 - 120 to 240 Sqmm ---- Tenderer should quote the rate excluding GST
0.18
32278
5810.04
code88 - Providing M Sand : Supplying and filling in plinth, foundations or UG cable work with approved M sand including watering, ramming, consolidating and dressing. The rate includes the cost of material, labour charges, required tools and plants etc., complete. Work shall be carried out as per the instructions of Engineer in charge of works as per the standard procedure. ---- Tenderer should quote the rate excluding GST
18
1965
35370
code89 - Heavy Duty Copper Terminal Long Barrel
25 Sqmm Copper Terminal, Apprx Wt: 11 Gm ---- Tenderer should quote the rate excluding GST
16
27
432
code90 - Installation of Pre Insulated Lug CPTAU for 25 Sqmm ---- Tenderer should quote the rate excluding GST
16
160
2560
code91 - 70 Sqmm Copper Terminal, Apprx Wt: 38 Gm ---- Tenderer should quote the rate excluding GST
36
89
3204
code92 - Installation of Pre Insulated Lug CPTAU for 70 Sqmm ---- Tenderer should quote the rate excluding GST
36
160
5760
code93 - 150 Sqmm Copper Terminal, Apprx Wt: 98 Gm ---- Tenderer should quote the rate excluding GST
12
274
3288
code94 - Installation of Pre Insulated Lug CPTAU for 120 Sqmm ---- Tenderer should quote the rate excluding GST
12
160
1920
code95 - Full Threaded Bolt and Nut as per IS 1367 GI 16x50 mm ---- Tenderer should quote the rate excluding GST
0.1
132571
13257.1
code96 - Earth work excavation for pipelinesorcables by Manual means upto 600 mm trench width, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, removal of stumps and other deleterious matter, including dressing of excavated surfaces, disposing off or leveling the excavated earth or sorting and stacking the selected earth for reuse in a radius of 50 m. Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering and lift upto 1.5 m including cost of labour, tools, usageand other appurtenances required to complete the work. In all kinds of soils. Depth upto 1.50m ---- Tenderer should quote the rate excluding GST
165.6
486
80481.6
code97 - Operation and maintenance of the pump house with 1 no qualified technicians and 1 helper ---- Tenderer should quote the rate excluding GST
6
76000
456000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%