Bengaluru Water Supply And Sewerage Board Tender

003 - Supplying S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work site, rolling and lowering into trenches, laying true to line and level including loading and unloading at both destinations and jointing of pipes and specials, perfect linking of joints with jack to correct position including cost of jointing materials, i.e, rubber rings conforming to IS: 5382 for S&S RCC pipes, with all leads and lifts as directed and giving necessary hydraulic test as per ISS to the required pressure and commissioning etc. complete. (Contractor will make his own arrangements for procuring water for testing). Before the execution of the work, the contractor shall carry out the survey. ( CSR 23-24 Vol - V, Sl.No: 16.3, Pg. No. 188 ) 300 mm dia ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

004 - Supplying lowering laying, jointing, testing and commissioning of following diameters glazed stone ware pipes, conforming to IS 651:1992, (with 5th revision) in all respects jointing with EPDM rubber rings (seals according to EN 681 & ASPM 425) The rubber seals joints pipe will have groves in interior of socket and exterior of the spigot. The rubber gasket shall be prefixed at the factory by the manufacturer rigidly with approved glue to have leak proof joint including conveying of pipe to work site and rolling and lowering into trenches, laying true to line, level and perfect linking at joints testing and commissoning including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of GSW pipes and specials, with rubber gaskets conforming to EN 681 and ASTM C-425 including cleaning the socket and spigot with soap solution and applying talcum powder for detecting crack, then applying glue and before inserting of rubber gaskets, jacking and fixing in perfect condition including the cost of soap solution, talcum powder and glue etc. and giving necessary hydraulic test to the required pressure of water head with all lead and lifts including costing of jointing materials and all necessary survey works for laying of sewers etc., and disposal of debris as directed etc., complete. (Contractor will make his own arrangements for procuring water for testing) with Rubber ring gasket joints 230mm dia ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

005 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5 m Including cost of all labour complete as per specifications ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007a - Providing and constructing “WIRE CUT BRICK MACHINEHOLE CHAMBERS” using Portland/Pozzolana cement, conical in shape at top, with CC 1:3:6 foundation using 40mm and down size graded metal of approved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks of approved quality, plaster inside and out side with CM 1:3, 12mm thick, except for the conical surface outside where the plaster thickness shall be 20mm. Slope inside to be 1:6 in the concrete towards central drain and finished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mm and down size. Supplying and fixing SFRC Machinehole frame and cover (Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4. Supplying and fixing footsteps made of 12mm dia. steel bars (Fe-500) with 3mm thick plastic encapsulation (IS-10910). The footsteps shall be fixed 30cms apart and on CC block embeded to masonry wall. The whole works include watering, curing , barricading, danger lighting, pouring tar over MH frame and cover, cost of tar, shoring, strutting, de watering, engraving achinehole number with flow direction on the inner conical surface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm diaCirc. B M.H 2.30 mt depth machinehole NMH1 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007b - 2.00 mt depth machinehole NMH2 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007c - 1.00 mt depth machinehole NMH1, NMH7 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007d - 1.10 mt depth machinehole NMH8 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007e - 1.20 mt depth machine hole NMH2, NMH9 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007f - 1.30 mt depth machine hole NMH3, 10, 11, 12 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007g - 1.40 mt depth machine hole NMH4 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007h - 1.50 mt depth machine hole NMH5 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

007i - 1.60 mt depth machine hole NMH6 ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

008 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

009 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement & formwork shall be paid separately)Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates. ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

010 - Removal of unserviceable soil with disposal upto a suitable distance as directed by the engineer incharge of work. ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.

011 - Dewatering the sewage / storm water by using reqired 5 HP submersible pump for the diversion of storm / sewage during the execution of work. Considering for one Pump:5HP ---- Amount put to tender is excluding GST. Rates quoted shall be excluding GST.