Bengaluru Water Supply And Sewerage Board Tender

code04 - Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete.Work shall be carried out as per the instructions of Engineerin- charge of works as per the standard procedure. CSR 2023-24 Vol-6, P.No-158, I.No- 1 ---- Amount put to tender is exclusive of GST

code05 - 11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering without Load Break Switch (HT Metering Box Fabricated out of 3 mm MS Sheet duly epoxy powder coated) as per revised Specification ---- Amount put to tender is exclusive of GST

code06 - Erection of HT metering Cubicle on Platform. ---- Amount put to tender is exclusive of GST

code07 - Load Break Switch with Panel ---- Amount put to tender is exclusive of GST

code08 - 11 KV, 25 KA, 630 A, HT Outdoor Three Panel Vaccum CircuitBreaker complete as per specification. One incoming and 2 outgoing ---- Amount put to tender is exclusive of GST

code09 - Supplying, installing, testing and commissioning of 11/0.4 KV 3 Phase 50 cycle oil immersed, naturally cooled, outdoor type transformer connected delta on H.T. side and star on L.T. side, dehydrating silica gel breather on eye level, rating and diagram plate, two earthing terminal, lifting lugs, oil level gauge, drain valve with plug, temperature not exceeding 50ºC on load, oil filling hole with plug, four unidirectional roller, arcing horns, explosion vent, terminal arrangement bushing on H.V. side and cable box on LV side, first filling of oil upto desired level and transformer installing on existing structure with all required materials arrangement as required ISI marked & as per IS specification, hand operated off load tap changer switch above 100 KVA, oil conservator with drain valve, plug 63 KVA and above.Copper wound,315KVA as per IS-1180(Part-1):2014 and BEE 5 STAR RATING ---- Amount put to tender is exclusive of GST

code10 - 11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975. 95SQmm ---- Amount put to tender is exclusive of GST

code11 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 240Sqmm ---- Amount put to tender is exclusive of GST

code12 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975. 185Sqmm ---- Amount put to tender is exclusive of GST

code13 - 11KV HT - Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable.3x95 Sqmm. ---- Amount put to tender is exclusive of GST

code14 - Epoxy Terminating Kit (Pothead) suitablefor 1.1 kV, LTUG Cable 3.5 x 400/500 Sqmm. ---- Amount put to tender is exclusive of GST

code15 - Providing and fixing G.I. chain link fabric fencing of required width in meshsize 25x25 mm made of G.I. wire of dia 3 mm including strengthening with2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. ---- Amount put to tender is exclusive of GST

code16 - Providing and fixing Steel work in built up tubular (round, square orrectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer,including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes including cost of materials, labour, usage charges of machinery complete as per specifications and as per directionsof the Engineer-in-Charge ---- Amount put to tender is exclusive of GST

code17 - GI/Copper strips for grounding connections, using necessary fixingmaterials as required.50 x 6 mm GI strip. ---- Amount put to tender is exclusive of GST

code18 - GI/Copper strips for grounding connections, using necessary fixingmaterials as required.50 x 6 mm copper strip. ---- Amount put to tender is exclusive of GST

code19 - GI/Copper strips for grounding connections, using necessary fixingmaterials as required.600 x 600 x 3 mm GI Plate ---- Amount put to tender is exclusive of GST

code20 - GI/Copper strips for grounding connections, using necessary fixingmaterials as required.600 x 600 x 3 mmCopper Plate ---- Amount put to tender is exclusive of GST

code21 - Digging of Pit for providing GI Pipe type Earthing.Hard Soil. ---- Amount put to tender is exclusive of GST

code22 - GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg ---- Amount put to tender is exclusive of GST

code23 - Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each. ---- Amount put to tender is exclusive of GST

code24 - Good Quality Salt for grounding purposes packed in 50 Kg gunny bag. ---- Amount put to tender is exclusive of GST

code25 - Providing & fixing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete as per design drawings (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of Engineer in charge.0.63 mm thick with zinc coating not less than 275 g/ m ---- Amount put to tender is exclusive of GST