Bengaluru Water Supply And Sewerage Board Tender

code04 - Supply and potting of cable potting Kit for the Siemens sensor cable

code05 - Supply of Siemens approved make Battery for the Siemens make Bulk flowmeter transmitter "SITRANS F M Accessory MAG 8000 Internal Battery P1039 with connector, 2D Cell (3.6 V, 33AH)" rate including transportation and scrape batteries

code06 - Supply of Siemens approved make Rechargable Battery for the 2G module transmitters "SITRANS F M Accessory MAG 8000 rechargable Battery with connector, (4 V, 33AH)" rate including transportation and scrape batteries.

code07 - Supply of Siemens approved make Antenna for the 2G module transmitters "SITRANS F M Accessory MAG 8000 )" rate including transportation and scrape batteries.

code08 - Supply and installation of MAG 8000 transmitter remote replacement kit

code09 - Shifting of transmitter panel with all points accessories from one location to other location as per direction of Engineer in charge.

code10 - Dismantle, transport, re-instal and commission the bulk flow meters with the following works: (1). Removing of sensor probes from the existing pipe lines (2). Dismantling of the sensor cables from the sensor probes on feeder main / branch lines. (3). Removing of the pedestal panel along with all its accessories like totalizer unit, batteries, GSM modem and display unit from the existing location and stacking the same into baggage. (4). Transportation of the pedestal panel along with all its accessories to the new location indentified by the concerned engineer. (5). Errection of the sensor probes to the new line identified by the concerned engineer. The hot tapping method should be used while installing the sensor probes and supply, fixing of ball vale to the pipe. (6). Transmission of the data from the flow meter to the central server and integrating it to the software applications.

code11 - Supply, installation and commissioning of 300mm dia EMF meter 230V input power supply operated, with power operated RTU & outdoor panel board.

code12 - Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer-in-Charge.

code13 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density

code14 - Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. [Mix 1:3:6 Using 20 mm nominal size graded crushed coarse aggregates]

code15 - Removing & Resetting existing Heavy Duty Cobble/Interlocking stones/Pavers of thickness 60/75/80/100mm using Cement and 40mm thick sand bed ( average thickness ) and compacting with plate vibrator to achieve final desired compaction & setting of paver to its final level , including cost of materials, labour and usage charges of machinery complete as per specifications. (The cost of new paver/stones required shall be added separately)

code16 - Charges for Monitoring of EMF meters, Data Loggers - Which includes charges for maintaining Flow/ data transmiter Healthiness, Communication, Battery performance, Data availability upto dedicated mail server, Submission of Monthly progress reports, Manpower, Rectification of EMF meter in case of sensor cable damages Other Tools and tackles, Machinery etc. (cost Excluding Spares) M/s. Siemens make flowmeters installed under D2A & D2B projects. - 413 Meters X 08 months = 3304 Nos

code17 - Removing and resetting of precast kerb stones fixed with CM 1:3 fixed and finished in line as per direction of Engineer in charge.