Bengaluru Water Supply And Sewerage Board Tender

004 - Providing lowering laying, jointing, testing and commissioning offollowing diameters glazed stone ware pipes, conforming to IS 651:1992,(with 5th revision) in all respects jointing with EPDM rubber rings (sealsaccording to EN 681 & ASPM 425) The rubber seals joints pipe willhave groves in interior of socket and exterior of the spigot. The rubbergasket shall be prefixed at the factory by the manufacturer rigidly withapproved glue to have leak proof joint including conveying of pipe towork site and rolling and lowering into trenches, laying true to line,level and perfect linking at joints testing and commissoning including loading and unloading at both destinaions and cuts of pipes wherevernecessary including jointing of GSW pipes and specials, with rubbergaskets conforming to EN 681 and ASTM C-425 including cleaningthe socket and spigot with soap solution and applying talcum powderfor detecting crack, then applying glue and before inserting of rubbergaskets, jacking and fixing in perfect condition including the cost of soapsolution, talcum powder and glue etc. and giving necessary hydraulic testto the required pressure of water head with all lead and lifts includingcosting of jointing materials and all necessary survey works for laying ofsewers etc., and disposal of debris as directed etc., complete. (Contractorwill make his own arrangements for procuring water for testing) withRubber ring gasket joints ---- Amount put to tender is exclusive of GST and rates quoted shall be exclusive of GST

005 - Providing and constructing "WIRE CUT BRICK MACHINEHOLECHAMBERS"usingPortland/Pozzolana cement, conical in shape at top,with CC 1:3:6 foundation using 40mm and down size graded metal ofapproved quality and with an offset of 0.15M alround the chamber. Construct Brick masonry in CM 1:4, 340 mm thick, with wirecut bricks ofapproved quality, plaster inside and out side with CM 1:3, 12mm thick,except for the conical surface outside where the plaster thickness shall be20mm. Slope inside to be 1:6 in the concrete towards central drain andfinished smooth. Fixing of pipes in CC 1:2:4 with graded metal of 20mmand down size. Providing and fixing SFRC Machinehole frame and cover(Heavy Duty) conforming to IS:12592 with latest amendment, in CC 1:2:4.Providing and fixing footsteps made of 12mm dia. steel bars (Fe-500)with 3mm thick plastic encapsulation (IS-10910). The footsteps shall befixed 30cms apart and on CC block embeded to masonry wall. The wholeworks include watering, curing, barricading, danger lighting, pouringtar over MH frame and cover, cost of tar, shoring, strutting, de-watering,engraving Machinehole number with flow direction on the inner conicalsurface etc. as per the drawing etc. as per technical specifications and for the following diameters and depth etc. for 1.2mm dia 1.0 M depth & SFRC cover & frame ---- Amount put to tender is exclusive of GST and rates quoted shall be exclusive of GST

006 - Between 1.00 to 2 mtr depth (0.1 Mtr intervals) ---- Amount put to tender is exclusive of GST and rates quoted shall be exclusive of GST

007 - Refilling available earth around trenches/pipelines, cables in layersnot exceeding 20 cms in depth, compacting each deposited layer byramming after watering with a lead upto 50 m , and lift upto 1.5 m.Including cost of all labour complete as per specifications ---- Amount put to tender is exclusive of GST and rates quoted shall be exclusive of GST

008 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification includingpremixing the Material with water at OMC in mechanical mixplant carriage of mixed Material by tipper to site, laying in uniform layers with paver/grader in sub-base / base course onwell prepared surface and compacting with vibratory roller toachieve the desired density. ---- Amount put to tender is exclusive of GST and rates quoted shall be exclusive of GST

009 - Providing and laying in position Cement Concrete for levelling course forall works in foundation. The granite/trap/basalt crushed graded coarseaggregates and fine aggregates as per relevant IS Codes machine mixed, laid inlayers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges ofmachinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates ---- Amount put to tender is exclusive of GST and rates quoted shall be exclusive of GST

010 - Removal of Unserviceable Soil with Disposal upto a suitabledistance as directed by the Engineer incharge of work ---- Amount put to tender is exclusive of GST and rates quoted shall be exclusive of GST