Bengaluru Water Supply And Sewerage Board Tender

code04 - Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2 " O " rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10: (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete. For sluice Valve of PN 16.0 and 300mm dia

code05 - Providing, fabricating and fixing at site various diameter MS MJ ends to suit CI / DI pipe as per the sketch . The cost is inclusive of all materials,i.e, rubber 'O' rings, flanges, bolts and nuts, consumables, hire charges, tools and tackles, welding equipments, lead and lifts, etc. complete as per the instructions of Engineer in charge For CI/DI Pipes of 200mm dia

code06 - For CI/DI Pipes of 300mm dia

code07 - Providing, fabricaing and fixing at site various diameters of MS Flanges as per IS standards to fix sluice valves as per sketch. The rate to include cost of all materials, labour, consumables, hire charges for tools and tackles, weldiing equipments etc. complete as per instructions of theEngineer in charge for: Flanges of 300mm dia & 16mm thick

code08 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specifications including premixing the Materials with water at OMC in Mechanical Mix Plant carriage of Mixed Materials by tipper to site, laying in Uniform layeras with Paver in Sub base / Base course on well prepared surface & compacting with Vibratory roller to achieve the desired density complete as per Specifications MORTH Specifications

code09 - Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50m, and lift upto 1.50m, Including cost of all labour complete as per specifications .

code10 - Removal of Unserviceable soil with disposal upto a suitable distance as directed by the Engineer in charge of work