Bengaluru Metropolitan Transport Corporation Tender

code04 - FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. 15.86

code05 - FIRE HYDRANT SYSTEM Supplying Installing, testing and commissioning of 63mm mm dia Double headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 7 Kgf/cm 2 of pressure with blank cap and wheel as per IS 5290 etc. complete Make : WINCO/NEW Age ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.93

code06 - Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick @ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m, 100mm Nominal bore 5.40mm thick@ 14.40 Kg/m,150mm Nominal bore, 5.40mm thick @ 21.20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41- Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, usage charges of machinery complete as per specifications. 15.118.2

code07 - Do- Galvanized Iron Pipes 80 mm dia. 15.118.5

code08 - Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :16.1 Gun Metal ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 18.16.1

code09 - SITC of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903.complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.95

code10 - SITC of Hose cabinet made out of 18 gauge M.S.sheet with double glass door with locing arrangement and painted with two coats of Fire red Enamel paint at outer ise of the Box and two coats of white enamel paint at inner side of the box is to accomodated 2 Nos. of Fire hose box size 20"x24"x10" ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.97

code11 - Fire duct Shutter fabricated out of MS sheet & frame of 18 SWG CRCA with 2 doors & 4 mm thick glazed glass with water proof beading. Door shall be of size 900mm x 1200mm min. with suitable rubber beeding & locking arrangement. Quoted rate shall be includes all fasteners etc, and complete shutter shall be powder coated of approved colour both inside with white and red out side. ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work.

code12 - SITC of Hose reel cain M.S.Pressed reel of 600mm dia cn swign which allows 180- degree swing conforms to IS 884/85 including cost of materials., complete as per specificaiton with all lead and lift, loading unloading, labour, hire charges of machineries and all such incidental charges necessary for successful completion of work and as per directions of the Engineer-in-charge of the work ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.99

code13 - Supplying Installing, testing and commissioning of 19mm dia 36.50m length hose with rubber lining smooth bore, reinforced of natural/ synthetic fibres, a rubber cover finish shall be smooth, fluted or fabric marked with minimum thickness of 1.50mm and to with stand a working pressure of 10Kgf/sqcm confirms & tested as per IS 444 ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.1

code14 - Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way - 150 mm dia M.S. Pipe ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 18.19.2

code15 - SITC of Gun metal AIR RELEASE VALVE SIZE OF 25mm dia ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.94

code16 - Supply, Installation testing and commissioning of approved make heavy quantity (Class ‘C’) confirming to as per IS 1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc., Including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S. angle supports work includes two coats of metal primer and two coats of Red enamel paint etc., - 150 mm dia ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.104.1

code17 - Supply, Installation testing and commissioning of approved make heavy quantity (Class ‘C’) confirming to as per IS 1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc., Including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S. angle supports work includes two coats of metal primer and two coats of Red enamel paint etc., - 100 mm dia ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.104.2

code18 - Supply, Installation testing and commissioning of approved make heavy quantity (Class ‘C’) confirming to as per IS 1239 Such as Tees elbows check nuts unions, Flanger, Nipples etc., Including cutting welding, Trending fixing on walls, cealing (Using 41-Tech pipe/M.S. angle supports work includes two coats of metal primer and two coats of Red enamel paint etc., - 80 mm dia ---- etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.104.3

code19 - Supply, installation, testing and commissioning of addressable peer to peer Networkable analogue addressable type fire alarm control panel with minimum 1500 Character / 240X64 Pixel / 7inch Touchscreen graphic LCD display. The panel should be equipped with sufficient numbers of loop with 20% spare capacity, with each networkable intelligent fire alarm Control Panel having SLC with capacity of min 126 /240 detectors/ devices in any combination with key pad, dual flash-based microprocessor technology, inbuilt USB Port for upload and down load the configuration tools, RS232 serial port for direct PC or modem connection, inbuilt NAC's, min 20 programmable Zonal LEDs and operates on 240V AC + 10% with 50 Hz with built in charger. The panel shall have fire, fault relays, option of BMS integration MODBUS/ BACKNET, graphical software for provision of TCP/ IP modules, Remote Access, Class 'X' wiring with provision of both class 'A' and class 'B' wiring in the SLC circuit, user friendly with communication facility to monitor & control the FACPs from a single window. The panel shall be suitable for minimum of 5000 event record facility, event fetch from FACP facility and the single panel shall be suitable for min 2000 fire zones and 200 Panels/ Nodes in one network with all other accessories required to successfully run the system. (The System cost shall be included of all necessary cards, modules, Panel enclosure, CPU and associated accessories to complete the system design). Approval: VDS/UL/EN-54 St 4 Loop Panel etc., complete with all lead & lift, as per specifications and as per directions of the Engineer in charge of the work. 15.66.2

code20 - Supply, installation, testing and commissioning of analogue addressable Smoke Sensor detector and standard base (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) 15.69

code21 - Supply, Installation, Testing & Commissioning of Analogue Addressable loop powered Sounder & Beacon with inbuilt isolator and having Min 15 distinct sound patterns/ multitone to indicate Exit doors and direct occupants for safe and fast evacuation and 100dB output with minimum 1Hz Frequency flash rate designed for IP65 requirements and approved to operate in 10 C to +55 C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation. (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device)Sounder cum Strobe 15.68

code22 - Supply, install, test and commissioning of Analogue addressable Manual Call Point (Resettable Type) with inbuilt isolator and LED indicator, designed for IP44 requirements and approved to operate in 10C to +55C temperature, complies with the essential requirement of the EMC Directive to be supplied with Barriers, Junction Box, Glands and other mounting accessories for proper installation. (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) Manual Call Point 15.73

code23 - Supply, install, test and commissioning of Analogue addressable Monitor Cum Control (Input/Output) module (1+1) with inbuilt relay and isolator with LED indicator, approved to operate in 10C to +55C temperature, complies with the essential requirement of the EMC Directive to be supplied with Junction Box, Glands and other mounting accessories for proper installation. In case of Manufacturer with single Input or Output module need to supply One quantity of each for line item. (For Detectors/Device without inbuilt isolator, Fault Isolator or Isolator base to be provided with each detector/device) 15.72

code24 - Supplying and drawing of 2 Core X 1.5 Sqmm copper conductor armoured cable 15.105

code25 - Supplying Installing, testing and commissioning of Public address system (Two way comminication type) as per requirement of Fire Force authority and which Generally comprise of Supplying Installing, testing and commissioning of Approved make 6 W.wall mounted speaker with talk back facility with store enamel painted M.S.Sheet hosing etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. 15.107

code26 - Supplying Installing, testing and commissioning of P.A.System console panel with push button with speaker and indictoron Accomdated in M.S.Cabinet with painting including cost of materials, labour, usage charges of machinery complete as per specifications 40 Zone cansole. 15.108.3

code27 - P.A.System amplifier 250W RM S out put with complete wiring and controls accessable form front 15.109

code28 - Supplying Installing, testing and commissioning of MIKE suitable to I.A.System. Complete 15.11

code29 - Providing and Fixing Fire force board size of 3'x2' made out to Acrylic sheet of 3mm thick and fixing with Stainless Steel finished studs etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. 15.106

code30 - Providing's Escape Singage Photoluminescent rigid plastic, 2 mm thickness, Printed on High Quality glass paint with UV resistance, 5 years warranty, Material Used - Non Radiocactive, non-phosphorous, non toxic and lead free. Available in different types & sizes, Time after removing the light source (in minutes) 60 minutes, Luminescent intensity (milicandelas *per square meter - mcd/sqm) : 30 mcd/sqm. Luminescent Intensity greater than 0.32 mcd/sqm, Period of Light Decay* (In Minutes) :3100, including cost of materials, labour, usage charges of machinery complete as per specifications. 15.74

code31 - Providing and Fixing evacuation plan of size A4 made out to Acrylic sheet of 3mm thick and fixing with Stainless Steel finished studs etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. 15.75

code32 - Providing and Fixing evacuation plan of size A3 made out to Acrylic sheet of 3mm thick and fixing with Stainless Steel finished studs etc. complete including cost of materials, labour, usage charges of machinery complete as per specifications. 15.76

code33 - Supply and installation of 2 Kg C02 Gas Type Fire Extinugisher Squeeze grip type, used Unused Mechanism, Squeeze Grip, Gross Weight 9.1 Kg. empty Weight 7.1 Kg. Can Height 595MM Diameter 108MM, Discharge Time less than 8 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 88, Can Construction : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness: 4.0MM lSI Approved, 1 Year Warranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete 15.33

code34 - Supply, installation in position, testing and commissioning of 4.5Kg C0 Gas Type Fire Extinugisher, Trolley Mounted, 2 Easy Weight Management used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg empty Weight 14.6 Kg. Can Height 860MM Diameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8 & C Fire, 8 Rating 138, Can Constuctin : Hot spinning/Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External coating of Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved 1Year Warranty. with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete 15.33

code35 - Supply and installation of 2 kg Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge, Gross Weight 3.6 Kg, empty weight 1.6 Kg, Can Height 344MM, Diameter 108MM, Discharge Time less than 8 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 2 meters, applicable on Class A,8,C and electrically started Fire, A Rating 1A, 8 Rating 88, Can construction : Deep drawn & Co., Mig welded, valve Construciton :Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete IS 15683, CE Approved 15.6

code36 - Supply, installation in position, testing and commissioning of 6kg Fire Extinguisher Mono Ammonium Phosphate Powder 90, Stored Pressure Type, Pressure Gauge, Gross Weight 9.40 Kg, empty weight 3.4 Kg, Can Height 480MM, Diameter 160MM, Discharge Time less than 13 Sees, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,B, C and electrically started Fire, A Rating 3A, B Rating 21B, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 1.60MM, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, usage charges of machinery complete as per specifications. complete IS 15683 and CE Approved 15.8

code37 - Supply and installation of 9kg Fire Extinguisher Mono Ammonium Phos phate Powder 90, Stored Pressure Type, Pressure Gauge, Gross Weight 14.9 Kg, empty weight 5.90 Kg, Can Height 615MM, Diameter 175M M, Discharge Time less than 13Secs, Controllable discharge mechanism (Squeeze grip with easy snap safety seal), Range minimum 4 meters, applicable on Class A,B, C and electrically started Fire, A Rating 4A, B Rating 348, Can construction : Deep drawn & Co., Mig welded, valve Construciton : Forging and Mechining, Internal Coating of Can: Epoxy powder coating, External Coating of Can: Epoxy Polyster power coating, Sheet metal thickness: 2.00 M M, 5 years Warranty with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost cost of supporting materials like MS stand & accessaries if it is fixing n floor / MS brackets & accessories if it is fixing on wall,, labour, usage charges of machinery complete as per specifications. complete IS 15683 and CE Approved 15.9

code38 - Rectification and commissiong Existing COMMON Control panel for fire fighting system work includes cost of MCCB ,Relays ,contactors .internal wiring ,indicators Etc complete.

code39 - Servicing of Diesel Engine ,work includes cost of Dismantaling of Engine shaft , Alignment of shaft ,replacing of suitable bearings ,Fuel filters,Oil filters ,Air filters ,replacemant of coolent Oil ,greacing Etc., Supply Fixing 12 V DC 150AH BATTARY MAKE EXIDE WITH CABLE Etc., Complete

code40 - Supply, Erection, Testing & commissioning of Foot Valves of Following Dimensions: 150 mm dia Including all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and convene of all material and all other such incidental charges necessary for successful completion of works as per the detailed technical specification and direction of Engineer - in charge of this work. 15.133

code41 - Supplying, Installing, testing and commisioning electrically driven jockey pump of capacity 180.0 Lpm at 90.0m head end suction type bronze impeller pump oupled to electrical driven motor with suitable HP with all the necessary accessories, operating on 3Ph 50Hz, 400/440 V AC supply including foundation, bolts etc. complete. Including cost of materials, labour, usage charges of machinery complete as per specifications and control panel is not included 15.137

code42 - Replacement of 3 nos Pressure gauges and 3 nos pressure switches and replacement of existing Gauges ,switches arrengements At wall side Etc., complete