Bangalore University Tender

code04 - Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08percentage and conforming to IS- 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1-4 (1 cement - 4 coarse sand), jointing with grey cement slurry at 3.3 kg/ m2 including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm (P.No. 60, 9.12.2, V-2, SR-2021-22) I.R dated 21.10. 2023

code05 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS - 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1-4 (1 Cement- 4 Coarse sand), Jointing with grey cement slurry at 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc., complete. (P.No. 60, 9.11, V-2, SR-2021-22) I.R dated 21.10. 2023

code06 - Providing skirting, dadooing, rises of steps with white glazed tiles 6mm thick on 10mm thick cement plaster 1-3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. (P.No. 65, 9.38, V-2, SR-2021-22) I.R dated 21.10. 2023

code07 - Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead AND lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement AND formwork shall be paid separately) Mix 1-3-6 (M10) Using 20 mm nominal size graded crushed coarse aggregates (P.No. 15, 2.1.4, V-1, SR-2021-22) I.R dated 21.10. 2023

code08 - Chicken Mesh (P.No. A-15, 114, V-2, PWD SR-2021-22)

code09 - Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1-5 (1 cement - 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1-6 (1 cement - 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge. (P.No. 42, 8.8, V-2, SR-2021-22) I.R dated 21.10. 2023

code10 - PVC pipe - OD 110mm and 6 Kg/sqcm, sanitary lines (P.No.34, V-5,3713, PWD SR-2021-22)

code11 - PVC pipe - OD 75mm and 6 Kg/sqcm, sanitary lines (P.No.34, V-5,3711, PWD SR-2021-22)

code12 - S.C.I. gully or nahani grating 100 mm dia (P.No. A-28, V-2, 516 , PWD SR-2021-22)

code13 - Providing AND fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width x 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware AND Multi point locking system with touch lock. Wall thickness of frame AND sash shall be of 2mm-2.5mm. Maximum possible size-2419mm x 2200mm. (The cost is inclusive of all fixtures and separate charges for minor TANDP s shall not be made) (P.No. 112, 12.90, V-2, SR-2021-22)

code14 - Providing AND fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm x 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size - 1000mm x 1000mm. (The cost is inclusive of all fixtures and separate charges for minor TANDPs shall not be made) (P.No. 110, 12.85, V-2, SR-2021-22)

code15 - Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern AND C.P. flush bend with fittings AND C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required - W.C. pan with ISI marked white solid plastic seat and lid (P.No. 123, 14.3.1, V-2, SR-2021-22)

code16 - Finishing walls with 100percentage Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali AND fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives, New work (Two coats applied at 1.43 litre/ 10 m². Over and including priming coat of exterior primer applied at 0.90 litre/10 m² with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (P.No. 46, 8.30, V-2, SR-2021-22)

code17 - Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete (external work). 20mm nominal OD pipe (P.No.122, 13.31.3, Vol-2 SR-2023-24) (P.No. 120, 13.33, V-2, SR-2021-22)