Bangalore University Tender

KSRB15-3-13 : Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (Item No. - 15.21, Page No. 116 ) PWD SR 2018-19

KSRB 15-5.1: Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4 to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications. (P.No.117, I:15.30, PWD SR:2018-19)

KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No.KBS 14.16, 14.17 - Colour glazed tiles 30x45 cms 6mm thick with border of size 30 x 10 cms. (Item No. - 14.41.3, Page No. 108 )

KSRB 14.14-5: Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1:3 mix, flush pointing with white cement using colour pigment , including cost of materials, labour, curing, complete as per specifications. - for Ceramic Tiles 400 x 400mm on a bed of 20mm thick (Item No. - 14.36.3, Page No. 108 )

KSRB 15-15.2 : Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer (P.No.119, I:15.51.2, PWD SR:2018-19)

KSRB 15-15.2 : Providing and applying painting in two coats with plastic emulsion paint of approved brand onceiling surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer (Item No. - 15.51.3, Page No. 119 ) PWD SR 2018-19

KSRB 15-18.3: Providing and applying enamel metal paint one coat (excluding priming coat) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil , grease, dirt, and foreign matters, including cost of materials, labour, complete as per specifications. (P.No.123, I:15.75, PWD SR:2018-19)

KSRB 15-17.7: Providing and applying painting one coat (excluding priming coat) on new wood surface and /or wood based surface with enamel paint to give an even shade after cleaning the surface of all dirt, dust and foreign matter, sand paper smooth, including cost of wood filler and materials, labours, complete as per specification. (P.No.121, I:15.61.1, PWD SR:2018-19)

Providing and fixing Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete (external work). 25mm nominal OD pipe (P.No.99, I:13.87.3, PWD SR:2018-19)

KSRB 2-2.2 : Earthwork excavation for foundation of buildings, water supply, sanintary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5m. In depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m. after breaking of clods complete as per specifications. Specification. No.KBS 2.1(b) / 2.3.5 (P.5/I.2.4) PWDSR -2018-19.

KSRB 13-73.4 Providing and fixing to wall, ceiling and floor high density polyethlylene pipes 6.00Kgf/sq.cm working pressure 110mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of machinery and testing complete as per specifications. Specification no. KBS 13.2.15.2/13.9. (P.No.96, I:13.73.5, PWD SR:2018-19)

Constructing brick masonry inspection chamber 600x600mm, and 450mm depth, ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 600x600mm internal dimensions, total weight of cover with frame to be not less than 38 kg ( weight of cover 23kg and weight of frame 15 kg) R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal, foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications. Specification No. KBS 600x600mm and 450mm depth ( clear inside dimension ) for single pipeline, using table moulded non-modular bricks of class designation 50 in cement mortar 1:5, C.I cover withframe (light duty) 600x600mm (Item No. - 11.50.1, Page No. 70 ) (P.75/I.11.50.2) PWDSR - 2018-19.

KSRB 2.4 :Refilling availuable earth around pipe lines, cables in layers not exceeding 20cms in depth, compacting each deposited layer by ramming after watering with lead upto 50m and lift upto 1.5m including cost of all labourcomplete as per specifications. (P.7/I.2.11)

KSRB 13-6.1-1: Providing and fixing in position brass bib cock of approved quality 15mm nominal bore including cost of materials, labour and HOM of equipments with all leads complete as per specifications. Specification no. KBS 13.2.2/13.3 (P.No.93, I:13.23, PWD SR:2018-19)

KSRB 13-6.2-2: Providing and fixing in position brass stop cock of approved quality 20mm nominal bore including cost of materials, labour and HOM of equipments with all leads complete as per specifications. Specification no. KBS 13.2.2/13.3 (P.No.93, I:13.27, PWD SR:2018-19)

KSRB 13-6.6-3 : Providing and fixing unplasticised PVC connection pipe with brass union 15mm dia nominal bore 450mm length of PVC connection including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No. KBS (P.No.94, I:13.47, PWD SR:2018-19)

Providing and fixing flush door shutter made out of solid core black board type, well seasoned chemically treated hard wood battens and internal frame with minimum 45 mm wide wooden frame all-round door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door using liquid phenol formaldehyde resin as per IS specification 2202 (Part-I) 1991. From manufacturer (Factory) complete as per specification. - 35mm thick both side teak (Item No. - 9.106.4, Page No. 65 PWD SR:2018-19 )

Providing and laying flooring using prepolished, water cut/gang saw 19mm thick granite laid with a bed of 20mm thick 1:4 cm & jointed with neat cement slurry mixed with pigment to mach shade of granite slabs including laying POP on finished surface and cleaning the surface, including the cost of all materials, mortar and labours etc., complete as per specification. using black granite / Multy red / ruby red / black / hassan green/River pink granite of width note less than 900mm (P.No.109, I:14.47.2, PWD SR:2018-19)

13.71 KSRB 13-11.1 : Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testig complete as per specifications. (for 1000 litre capacity) Specification No. KBS 13.22 (P.No.96, I:13.78, PWD SR:2018-19)

KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification No. KBS 7.12 (Item No. - 7.9, Page No. 34 PWD SR:2018-19)

KSRB-3.3 : Providing, injecting chemical emulsion forAnti-Termite Treatment along external walls where the apron is not provided using chemical emulsion at 3.19 Litre/sqm of the vertical surface of the substructure to a depth of 300mm. Including excavation of channel along the wall and redoing with chlorophyriphos emulsion concentrate 20% diluting in water to 1% concentration, including cost of chemicals, diluting in water to one percent concentration, labour, HOM of equipments, complete as per specifications. Specification No. KBS : 3.3.3 (Item No. - 3.3, Page No. 10PWD SR:2018-19 )

Providing and finishing external walls in two coats over one coat of 100% acrylic silicon glased primer primer with antifungal paint for top coat of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. (Item No. - 15.104, Page No. 127 PWD SR:2018-19)

KSRB 6-2.4 : Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 5.0 Newton per sqmm with cement mortar 1:4 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications. Specification No. KBS 6.2 (Item No. - 6.7, Page No. 29 PWD SR:2018-19 )

KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 (Item No. - 12.5, Page No. 79 PWD SR:2018-19 )

KSRB13-6.1-1 : Providing and fixing in position brass bib cock of approved quality 20 mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3 (Item No. - 13.24, Page No. 88 )

KSRB 11-2 : Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 (Item No. - 12.2, Page No. 79 )

KSRB 11-11.7 : Providing and fixing white vitreous china clay, angle back wash basin size 400x400mm with a single 15mm C.P brass pillar tap with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11 (Item No. - 12.29, Page No. 78 )

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. On the Pole of P1 Quarters. 32Amps (P. 24 I. 5.7.2) (PWD ELE SR 2019-20)

Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet.(P.5 I.2.2.1) (PWD ELE SR 2019-20). Short point upto 3Mtr from tapping point to out let via switch

Supplying and wiring adopting loop system in existing PVCConduit /casing capping casing capping using 2x1.5Sqmm(Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLSmulti strand PVC insulated copper wire (confirming toIS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, theother end of the wires shall be terminated with sufficientloose length in a wood/PVC round block. complete for eachoutlet.(P.5 I.2.2.2) (PWD ELE SR 2019-20). Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A.(P.5 I.2.3.4) (PWD ELE SR 2019-20) 4 sqmm

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand Copper with low conductor resistance single core wire in open or concealed system of wiring with specified IS-694:1990 & confirming to GTP of GROUP -A. (P.5 I.2.3.2,) (PWD ELE SR 2019-20) 1.5 sqmm

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (P.9 I.3.3.1) (PWD ELE SR 2019-20). 1-3Way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (P.9 I.3.3.2) (PWD ELE SR 2019-20). 4-5 way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (P.9 I.3.3.3) (PWD ELE SR 2019-20). 6 Way

Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (P.9 I.3.3.5) (PWD ELE SR 2019-20). 10-12Way

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. (P.9 I.3.5.1) (PWD ELE SR 2019-20).1-3 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. (P.9 I.3.5.2) (PWD ELE SR 2019-20). 4 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. (P.9 I.3.5.3) (PWD ELE SR 2019-20). 6 Module

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supportingback plate with required nos. of machine screws, bolts nutsetc., complete on the existing metal/PVC box. (P.9 I.3.5.5) (PWD ELE SR 2019-20). 10-12 Module

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A(P.10 I.3.6.1) (PWD ELE SR 2019-20). 6Amps one way.

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A(P.10 I.)3.6.3 (PWD ELE SR 2019-20). 6Amps 3way socket.

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A(P.10 I.3.6.4) (PWD ELE SR 2019-20). Stepped Fan Regulator.

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A(P.10 I.3.6.10) (PWD ELE SR 2019-20). 32Amps DP switch

Supplying and fixing of modular switch/ Socket/stepped electronic fan regulator/ dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293 GROUP A(P.10 I.3.6.11) (PWD ELE SR 2019-20). 6/16Amps universal socket

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.(P. 27 I.5.17.7) (PWD ELE SR 2019-20) 6-32Amps TPN

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 122 mm dia(P.40 I.6.1) (PWD ELE SR 2019-20)

Supplying and fixing PBBC/Bakelite straight or slant batten holder and wiring with 60w/230 volts lamps.(P. 20 I.4.2) (PWD ELE SR 2014-15)

Supplying of 1x4 feet - PVC Batten with integrated LED tube 20/22 W with high quality diffuser with Life of 25000 burninghours & 70% lumen maintenance with CRI > 80. PowerInput: 220-240V @ 50/60Hz & Power factor >0.9 along withCE approved. 2 years Warranty against any manufacturingdefect working under standard electrical condition.(P.64, I.12.3.2 ) (PWD ELE SR 2019-20)

Fixing all types and all capacities of fluorescent / false ceiling / spot light / CFL / LED fittings indoor on the wall / ceiling / rafters / girders using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps.(P. 79 I.14.7.1) (PWD ELE SR 2019-20). On wall / ceiling / Rafter / Girders

Supplying capacitor type ceiling fan complete with down rodblades, shackle, canopies etc., for operation on 230 volts,50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ball bearing system.(P. 46 I. 7.3.1) (PWD ELE SR 2019-20). 48"�Sweep�(1200mm)

Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired.(P.80 I.14.9) (PWD ELE SR 2019-20)

Supply of LED Streetlight luminaire with pressure die castaluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuserwith Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @Lumen Maintenance of 70%, maximum light intensity shouldbe between 60 degrees to 70 degrees. CCT > 5500K, IP66 optical and electrical compartment & impact resistanceof complete luminaire > IK08. Power Factor >0.9 withmains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatiblefor pole mouting with outer dia of 40mm to 50mm. UniversalVoltage driver to operate wide voltage range from 100V to270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approvedMCPCB. Top access street light with single screw to ensureease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Powerconsumption. LED Efficiency>130lm/w, nominal CRI >75.Luminaire manufacturer should have in-house facilityaccredited by NABL/CPRI & any Government certifiedagency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shallbe Engraved / Embossing on the die cast housing/ Bodypart. Warranty of 2 Years against any manufacturing defectworking under standard electrical conditions as mentionedabove should be given by LED manufacturer & Cree/Nichia/Lumileds/Osram make LED Source.(P No. 67 I. 12.8.3) (PWD ELE. SR 2019-20)LED Street Light 70 watts.

Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nutsand wiring using suitable capacity wires..(P.79 I.14.5) (PWD ELE SR 2019-20)