Bangalore University Tender

code04 - Point wiring using copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (P. No. 5 of 105 I. 2.1.2) (PWD ELE. SR 2023-24) Medium Point above 3mtrs upto 6 mtrs from tapping point to outlet via switch box.

code05 - Point wiring using copper wire with switch: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5 Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multistrand PVC insulated copper wire (confirming to IS-694: and latest amendments) with a 6Amps flush type SP control switch shall be fixed on the existing plastic sheet/gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. (P. No. 5 of 105 I. 2.1.3) (PWD ELE. SR 2023-24) Long Point above 6mtrs upto 10 mtrs from tapping point to outlet via switch box.

code06 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P. No. 5 of 105 I. 2.3.2) (PWD ELE. SR 2023-24) 1.5 Sq mm Earthing

code07 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P. No. 5 of 105 I. 2.3.3) (PWD ELE. SR 2023-24) 2.5 Sq mm Main circuit for lighting point

code08 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. (P. No. 5 of 105 I. 2.3.4) (PWD ELE. SR 2023-24) 4 Sq mm For heating point

code09 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (P. No. 8 of 105 I. 3.4.3) (PWD ELE. SR 2023-24) 4 - 5 way

code10 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (P. No. 8 of 105 I. 3.4.5) (PWD ELE. SR 2023-24) 8 way

code11 - Supplying and fixing surface/flush mounting unbreakable PVC modular box suitable for mounting modular switch plates with due groove cutting in Brick/C.C wall, including necessary rawl plugs, Machine/NF screws etc., complete. (P. No. 8 of 105 I. 3.4.6) (PWD ELE. SR 2023-24) 10-12 way

code12 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (P. No. 8 of 105 I. 3.5.3) (PWD ELE. SR 2023-24) 4 Module

code13 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (P. No. 8 of 105 I. 3.5.5) (PWD ELE. SR 2023-24) 8 module

code14 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. (P. No. 8 of 105 I. 3.5.6) (PWD ELE. SR 2023-24) 10-12 module

code15 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P. No. 9 of 105 I. 3.6.1) (PWD ELE. SR 2023-24) 6Amps one way Switch

code16 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P. No. 9 of 105 I. 3.6.3) (PWD ELE. SR 2023-24) 6Amps 3way socket

code17 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P. No. 9 of 105 I. 3.6.4) (PWD ELE. SR 2023-24) Stepped fan Regulator

code18 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P. No. 9 of 105 I. 3.6.7) (PWD ELE. SR 2023-24)16Amps one way switch

code19 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P. No. 9 of 105 I. 3.6.9) (PWD ELE. SR 2023-24) 32 Amps DP Switch

code20 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. (P. No. 9 of 105 I. 3.6.10) (PWD ELE. SR 2023-24) 16Amps universal socket

code21 - Supplying push button operated direct online starter with an antiweld silver cadmium oxide contactor with replaceable fixed and movng contacts and bimetallic thermal overload relay help in anticorrosion treated sheet steel or iron clad elcosure and fixng the same to suitable capacity wires for capacity wires for 230/440 V 1/3 phase motor upto 5 HP. (P. No. 14 of 105 I. 5.1) (PWD ELE. SR 2023-24)

code22 - Supplying fully automatic star delta starter unit push button type with suitable wires, 3 contactors, one adjustable thermal timer mounted on a common base plate held in steel enclosure for use on 400/440 V 3 phase and wired after fixing to the existing wooden board for motor. Upto 12.5 HP for Borewell (P. No. 14 of 105 I. 5.2.1) (PWD ELE. SR 2023-24)

code23 - Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copper with low resistance conductor confirming to table 3 class 5 of IS:8130 - 1984 and virgin grade PVC insulation and powder coating extruded PVC sheathed suitable for working voltage upto 1100volts as per IS-694:1990 & confirming to GTP of Group -A. 3Cx 6 Sq mm. P. No. 7 of 105 I. 2.6.3) (PWD ELE. SR 2023-24)

code24 - Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. (P. No. 43 of 105 I. 11.3.2) (PWD ELE. SR 2023-24) LED light fitting 1x4'-20/22 Watts

code25 - Supplying of ......feet - PVC Batten with integrated LED tube.....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. Power Input: 220-240V @ 50/60Hz & Power factor greater than 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. (P. No. 43 of 105 I. 11.3.3) (PWD ELE. SR 2023-24) LED light fitting 1x4'-20/22 Watts LED light fitting 1x4'-36/40 Watts

code26 - Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fittings indoor on the wall / ceiling / rafters / girders with necessary supporting frame, using 23/0.0076” twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/Ceiling/Rafter (P. No. 56 of 105 I. 13.7.1) (PWD ELE. SR 2023-24)

code27 - Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value greater than or equal to 4.2 CMM / Watt, Three Blades of blade leaf 1.05 mm thick Aluminium Alloy sheet, Class B motor insulation, Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 deg C over and ambient of 40 0C by resistance method at 245 volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210 Micro Amp, Power input, watt& current , Air Delivery & FanSpeed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty. 48” Sweep 5 Star (1200 mm) for student rooms & dining hall (P. No. 30 of 105 I. 6.4.1) (PWD ELE. SR 2023-24) )

code28 - Fixing a ceiling / Wall mounting fan of all capacities and all types to the existing S hook with fan regulator to the existing board together with wupplying and fixing a 5 amperes ceiling rose, necessary length of 23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring completely. (P. No. 57 of 105 I. 13.10) (PWD ELE. SR 2023-24)

code29 - Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC supply complete. (P. No. 30 of 105 I. 6.2.1) (PWD ELE. SR 2023-24) 12" Sweep (300mm)

code30 - Supplying of 1440 rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC supply complete. (P. No. 30 of 105 I. 6.2.2) (PWD ELE. SR 2023-24) 15" Sweep (450mm)

code31 - Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps ceiling rose with sufficient length of 23/0.0076 inch PVC insulated twin core wire of approved make. (P. No. 57 of 105 I. 13.14) (PWD ELE. SR 2023-24)

code32 - Supplying & Fixing Regular MCB distribution boards on wall/wood board/flush mounting using required clamps, bolts, nuts etc,.with provision for fixing suitable type capacity MCB's single phase/3 phase /double door with powder coated painting made out of 14 SWG MS enclosure.16 Way SP & N Double Door (P. No. 18 of 105 I. 5.19.10) (PWD ELE. SR 2023-24)

code33 - Supplying and fixing miniature circuit breakers/isolators on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross - 3 with short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. (P. No. 17 of 105 I. 5.18.4) (PWD ELE. SR 2023-24) 6-32 Amps MCB Double Pole

code34 - Supplying and fixing miniature circuit breakers/isolators on existing MCB distribution boards using necessary fixing materials and 'C' type curve, indicator ON/OFF, energy cross - 3 with short circuit breaking capacity of 10K and complete wiring as required. (P. No. 18 of 105 I. 5.18.9) (PWD ELE. SR 2023-24) 50-63 Amps MCB Tripple pole and N

code35 - Supply of LED Streetlight 120 Watts luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencygreater than130lm/w, nominal CRI greater than75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. (P. No. 46 of 105 I.11.8.5) (PWD ELE. SR 2023-24)

code36 - Supplying and fixing Using 25 mm dia G.I Pipe mm dia class GI Pipe bracket upto 2.7 mtrs long terminated with reducing collar of 40x25mm to which extra pipe of 175 mm length is fixed for fixing SV street light fitting of all capacities on rail/RCC/wall /tubular pole sing suitable clamps, bolts , nuts and wiring using suitable capacity wires. (P. No. 56 of 105 I.13.1.1) (PWD ELE. SR 2023-24)

code37 - Fixing SVL flood light fitting over existing pole including clamps, bolts, nuts and wiring using suitable capacity wires. (P. No. 56 of 105 I.13.5) (PWD ELE. SR 2023-24)

code38 - Supplying, Wiring & Fixing Earth electrode for Grounding conduits,I.C.cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr. Long buried in a pit..The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size asper ISI specification 7.3.3 of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc, the pipe shall have 16 through holes of 12mm dia. (P. No. 54 of 105 I. 12.56) (PWD ELE. SR 2023-24)

code39 - Supplying and running of GI/Copper strips for grounding connections, using necessary fixing materials as required. 25x3mm GI strip (P. No. 54 of 105 I. 12.58.7) (PWD ELE. SR 2023-24)

code40 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal magnetic /Micro processor release and earth fault as per IS-13947 FOUR POLE. (P. No. 17 of 105, I. No. 5.15.9) (PWD ELE. SR 2023-24) 100 Amps 25 kA.

code41 - Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts and wiring complete. Protection of overload and short circuit with thermal magnetic /Micro processor release and earth fault as per IS-13947 FOUR POLE. (P. No. 17 of 105, I. No.5.15.11) (PWD ELE. SR 2023-24) 160 Amps 25 KA

code42 - Fabricating supplying and mounting MS box made out 14 SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessarycable entry pipe with gland and box should be finishedwith 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. (P. No. 20 of 105, I. No.5.42.1) (PWD ELE. SR 2023-24)

code43 - Supplying, fixing and wiring 3 Phase Digital Ammeter /Voltmeter. (Without CT) (P. No. 19 of 105, I. No .5.29) (PWD ELE. SR 2023-24)

code44 - Supplying and Fixing of LED type panel board indicating lamp with required colour suitable for 220v A.C. 50Hz 12/24v D.C. Group A. (P. No. 19 of 105, I. No .5.38) (PWD ELE. SR 2023-24)

code45 - Supplying, fixing and wiring 50/5 to 400/5Amps 5VA burden Current Transformer. Class 0.5 accuracy with Tape Wound. (P. No. 19 of 105, I. No. 5.36) (PWD ELE. SR 2023-24)

code46 - Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. 100 Amps 4x30x6mm Aluminium Strips (P. No. 20 of 105, I. No .5.40.1) (PWD ELE. SR 2023-24)

code47 - Supplying and fixing angle iron frame work fabricated out of MS angle iron and MS flat 40x40x6mm with bolts washers etc and painted with 2 coats of red oxide and then two coats of approved paint (P. No. 20 of 105, I. No .5.41.1) (PWD ELE. SR 2023-24)

code48 - Supplying of 1.1 KV LT UG cable XLPE or Heat esistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity as per IS-3975 4 core 16 sq mm PB to Starter (P.No. 13 of 81, Sl. No. 201, I. 32.05) (ESCOM SR 2023-24)