Bangalore Electricity Supply Company Limited Tender

code04 - FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin - without frames consisting of 25mm thick PLPB table top, 25mm thick PLPB with edge bomded End table, 18 mm thick PLPB with edge bonded Modesty, Wire manager - ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg, as per specifications, drawings and as directed by Engineer in charge. Main Table: 1500 mmW X 750 mm D X 750 mm ht (Edgebinding table top) Side Table' 900mm W X 450 mm D X 750 mm ht.

code05 - FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin - without frames consisting of 25mm thick PLPB table top, 25mm thick PLPB with edge bomded End table, 18 mm thick PLPB with edge bonded Modesty, Wire manager - ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg, as per specifications, drawings and as directed by Engineer in charge. Main Table: 1500 mmW X 750 mm D X 750 mm ht (Main table and side table with Post formed table top)

code06 - CUBICLE WORKSTATIONS Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated, tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mm W) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway-one middle raceway (600 mm W) below table top per workstation and continous raceway at the skirting level, Wire manager - ABS plastic grommet one number per table, Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt, cantilever bkt, separator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge. T TYPE 2 wings 3 C) Size: 1500 mm W X 120 mm D X 1200 mm ht

code07 - do- L TYPE 1 wing 3 C) Size: 1500 mm W X 120 mm D X 1200 mm ht.

code08 - Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double grove section 2.683 kg/m and bottom member 114.3mmx44.45mm 3.18mm thick weight 2.646 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be throughly cleaned free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.using aluminium section anodized to 12-15 microns

code09 - Supplying and installing at site Steel Storage Racks of Size: 36”x 15” x 7’6” (w x d x h) made out of slotted angle rack supports of size 38 x 40 x 3mm with 6 shelves made out of 18G CR sheets with 4 side bend and additional rib at the bottom. The shelves shall be fixed to the slotted angles using Corner plates with suitable bolts and nuts and heavy duty bushes at bottom. applicable with plated bolts all round. With bushes at the bottom. The rack shall be finished with sprayed enamel paint of approved quality and shade.in enamel paint with all lead, lift and applicable taxes as per design and drawing and direction of Engineer in charge of work.

code10 - Supplying and installing at site Steel Storage Racks of Size: 36''x15'' x 2'6'' (w x d x h) made out of slotted angle rack supports of size 40mm x 40mm and thickness 14G with 3 shelves made out of 18G CR sheets with 4 side bend and additional rib at the bottom. The shelves shall be fixed to the slotted angles using Corner plates with suitable bolts and nuts and heavy duty bushes at bottom. applicable with plated bolts all round. With bushes at the bottom. The rack shall be finished with sprayed enamel paint of approved quality and shade.in enamel paint with all lead, lift and applicable taxes as per design and drawing and direction of Engineer in charge of work.

code11 - Supplying Revolving low back chairs with moulded cushion seat with fabric upholstery and mesh back with ABS protection at back with moulded ABS handles with revolving chromed steel base, twin wheel castors, gas lift, tilting bolt, chair of size Height 105cm, Length 58cm, Width 58cm & including transportation charges, loading & unloading & with all applicable taxes

code12 - Supplying and installing at site Steel Almirah of Size: 914mm(w) x 457mm(d) x1372mm (h) manufactured using high quality CR sheets of 18G for doors and 20G for body and shelves with 2 shelves making 3 compartments including providing good quality Godrej locks with spare keys. With handles. Welded and fabricated with good finish and coated with sprayed enamel paint of approved quality and shade with all lead, lift and applicable taxes as per design and drawing and direction of Engineer in charge of work.

code13 - Supplying Multi seater public 3 seating chair with perforated seat and back with chrome handles and chrome legs & including transportation charges, loading & unloading & with all applicable taxes

code14 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade, multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS-694:1990 & confirming to GTP of GROUP-A.1.5 sqmm

code15 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade,multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS-694:1990 & confirming to GTP of GROUP-A. 2.5 Sqmm

code16 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V Grade,multistrand Copper with low conductor resistnce single core wire in open or concealed system of wiring as per IS-694:1990 & confirming to GTP of GROUP-A. 4.0 Sqmm

code17 - Supplying and fixing of modular switch/socket/stepped electronic fan regulator/ dimmer/ telephone socket etc on existing modular switch plate Is 3854 and IS 1293 using Group A materials 6Amps 3way socket

code18 - Supplying and fixing of modular switch/Socket/stepped electronic fan regulator/dimmer/telephone socket etc on existing modular switch plate as per IS 3854 and IS 1293, GROUP A 6 Amps one way

code19 - Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 6 Moduler.

code20 - Supplying and fixing superior quality modular switch mountingpolycarbonate plate with necessary supporting back plate withrequired nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box 8 Moduler.

code21 - Supplying, installing, testing and commissioning of Diesel Generator set with following specifications. Power rating as per standard reference condition as per-BS 5514/ISO 3046/ ISO 8528 & IS 1002/ISO 3046 Generator set specifications. Engine: Diesel generating set are rated at 1500RPM and conform to ISO 8528 specifications. The engines are radiator cooled, four stroke and multi cylinder, conforming to ISO 3046. The scope of supply includes: Electrical starter motor12V DC Battery charging alternator, Bosch fuel system with mechanical governor, A1 Class. Spin-on lube oil filter, Spin-on dual fuel filter with water separator, Turbocharger, Charge air cooler, Silencer (Hospital grade), Dry type air cleaner, Shutoff coil, Flywheel and flywheel housing, First fill of lube oil and coolant, Safety for low lube oil pressure, Safety for high water temperature, Permissible overload of 10% for one hour in 12 hours of operation Capacity of Fuel Tank: Fuel tank suitable for 8 hours of operation 62.5KVA/50kw

code22 - Supply, Erection, testing and commissioning of AMF panel suitable for .....kVA DG set. The panel is of cubical type base/floor mounting control panel with hinged doors, undrilled bottom gland plate, aluminium Bus Bar with the accommodation for .....A 4 pole contactor for alternator with thermal O/L relay,..... A 4 pole contactor for mains, HRC fuse for short circuit protection, Microprocessor based AMF module with supply failure timer, Restoration timer, 3 impulse automatic engine start/stop logic, Mains/generator voltage, ....capacity bypass switch and frequency sensing, PCC 1301controller with water temperature/Lube oil pressure/ engine speed, Voltage/ampere/Frequency/ kVA, Running-hour count, No of starts, Fault indication, over / under speed, Fails to start, Low oil pleasure, High engine temperature, Under/over voltage, over current, Earth fault relay, with indications for Mains on, Load on Mains, Battery charger on Push buttons AMF module by pass Mode, Battery charger unit with inbuilt Auto/Manual and Flat/Boost facility. The complete set shall have sufficient safety and adhere to NEC, NBC 2016, IEC, CPWD specifications, PCB norms and KSGEI Acts and Rules.62.5 KVA

code23 - Supplying and furnishing window curtains stiched out of approved quality fabric of price range Rs. 150/sqm as per design to fit windows of size 1.80 mtr x 1.50 mtr with allround extra covering width of 15cm including suitable supporting system for curtains made out of heavy gauge stainless steel clamps, steel tube of 25mm diameter with ornamentals fenails (end caps) the curtains shall be hung at top using stiff canvas cloth and stainless steel rings punched to curtains cloth. the supporting system shall be fixed to the wall using good quality screws with fibre gattas. the cost shall include cost of all materials,labour charges for fixing furnishing etc., complete as per direction of Egineer incharge of work