Bangalore Electricity Supply Company Limited Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 84,400Document Cost
Refer DocumentsTender Fee
₹ 1,250
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
BESCOM/2024-25/BD/WORK_INDENT294Tender No
BESCOM/2024-25/BD/WORK_INDENT294Tender Authority
Bangalore Electricity Supply Company Limited ViewPurchaser Address
-Website
http://https://bescom.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
code04 - Do Lintle beam all around,Roof beam all around and Roof beam in between column.
8.4
10873
91334.88
... More
code05 - Do Roof slab
31.5
10210
321621.3
... More
code06 - Do Chajja all around inside
5.5
9878
54332.85
... More
code07 - Do Screed concrete
16
6951
111224
... More
code08 - Supplying,fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/ welding joints,tying with binding wire/soft annealed steel wire and other ancilary operations complete as per drawing and technical specification. additional lift charges for 1st Floor
3900
93
362856
... More
code09 - Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand)With Non modular bricks including cost of all materials,labour,scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. additional lift charges for 1st Floor
41
11416
468059.28
... More
code10 - do Parapet wall all around
7.5
11525
86443.875
... More
code11 - Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) including cost of all materials,labour,scaffolding and usage charges of machinery & other incidental charges complete as per the direction of engineer incharge of work. additional lift charges for 1st Floor Racks Support wall
75
1102
82680
... More
code12 - Providing and fixing with 25mm thick polished Cuddapah slabs using cement mortar 1:6, including cost of materials, labour, curing, polishing complete as per specifications.Cuddapah slab
55
672
37008.4
... More
code13 - Providing 12 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials,labour,curing complete as per specifications and as per directions of Engineer-in-charge.additional lift charges for 1st Floor Ceiling
210
335
70543.2
... More
code14 - Providing 15 mm cement plaster with cement mortar 1:3(1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corners wherever required smooth rendering,providing and removing scaffolding,including cost of materials,labour,curing complete as per specifications and as per directions of Engineer-in-charge.additional lift charges for 1st Floor Walls
550
362
199628
... More
code15 - Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/ stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials,labour,curing complete as per specifications and as per directions of Engineer-in-charge.additional lift charges for 1st Floor
240
446
107078.4
... More
code16 - Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.additional lift charges for 1st Floor
567
190
107911.44
... More
code17 - Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, usage charges complete as per specifications. additional lift charges for 1st Floor Door frames
0.25
143596
35899.24
... More
code18 - Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door shutters covered with cross bonded wooden sheets (core veneer) hot pressed and fastened on both sides of the door useing liquid phenol formaldehyde resin as per IS specifications 2202 (part-I) 1991. from manufacturer complete as per spcification. -do- 35 mm thick one side teak and one side commercial additional lift charges for 1st FloorDoor Shutters
10.5
4052
42555.24
... More
code19 - Providing & fixing of 3 track 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 108mm width 45mmheight with reinforcement of 1mm thickness and Sash with overall size of 39mm 75mm with GI reinforcement of 2mm and mesh sash of size 37mm 58mm. Coextruded Glazing bead for fixing of glass shall be of size 20mm 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm 2.5mm. Maximum possible size 2419mm 2200mm. (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) (The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made) additional lift charges for 1st Floor Windows
16.5
7003
115555.44
... More
code20 - Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free with gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the ventilator frame. The frame having overall size of 39mm 39mm with GI reinforcement of 1mm thickness. Louver clip in Aluminium (powder coated in white) will be used on the frame along with plastic parts for fixing the 4 mm pin head glass. Wall thickness of frame shall be 2mm.Maximum possible size 1000mm 1000mm.(The cost is inclusive of all fixtures and separate charges for minor T&Ps shall not be made)additional lift charges for 1st Floor Ventilators
10.5
5064
53180.4
... More
code21 - Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete.additional lift charges for 1st Floor Flooring & Skirting
220
1222
268840
... More
code22 - Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge. additional lift charges for 1st Floor Same as ceiling and inside plastering quantity
770
104
80080
... More
code23 - Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls 1.25 L/10 m2 over and including one coat of Special primer applied 0.75 L/10 m2 with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. (The gloss should be 50 60 degree angle with 10 years life). additional lift charges for 1st Floor Same as ceiling, inside & outside plastering quantity(vide item number 12,13&14)
1020
164
167606.4
... More
code24 - Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied PU wa terproofing membrane that is highly elastic with elongation greater than 400 and tensile strength greater than 2MPa as per ASTM D412. The waterproofing membrane to be applied in 2coats 1.6 kg/m2 to achieve final DFT (Dry Film Thickness) of 1mm including prime coat of epoxy primer 150 g/m2 and protection with 120gsm Geo-textile over the wa terproofing membrane. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification. additional lift charges for 1st FloorRoof slab
210
849
178432.8
... More
code25 - Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied 0.90L/10 m2 over an under coat of primer applied 0.75 L/10 m2 of approved brand and manufacture to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, sand papering and knotting , cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge. additional lift charges for 1st Floor
8
143
1148.16
... More
code26 - Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied 0.90L/10 m2 over an under coat of primer applied 0.80 L/10 m2 of approved brand and manufacture including preparing the surface after thorougly cleaning oil, grease, dirt and foreign matter, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.additional lift charges for 1st FloorWindows and ventilators
26.5
144
3830.84
... More
code27 - Providing and fixing 1mm thick M.S. sheet door with frame of 40406 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using flats 30x6mm for diagonal braces and central cross piece including cost of materials, labour, usage charges of machinery complete as per specifications and as per directions of the Engineer in Charge additional lift charges for 1st Floor
13
4411
57351.84
... More
code28 - Providing and fixing 100mm wide venitian blinds of window fashion fabric of Taiwan make, with 50mm thick powder coated channel with balance, imported, acrylic self alignable mechanism and equally placed spacers, imported tilting mechanism for easy tilting operation,with nylon imported thread and beadings, 100mm wide imported washable reusable fabric placed with top hanger and bottom with 100mm long bottom plate connected to nylon imported bottom link chain. The rate is inclusive of drilling holes for fixing channels to the wall, fixing threads and beadings and link chains, hard ware fixtures etc., complete as per drawing, specifications.
18.9
1500
28350
... More
code29 - FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top , 25 mm thick PLPB with edge bomded End table,18 mm thick PLPB with edge bonded Modesty, Wire manager -ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and Including 12mm thick tempered glass of selected make as per the directions of the Engineer incharge Main Table : 2000 mmW 900mm D 750 mm ht (Post formed table top) Side Table : 1200 mm W 450mm D 750 mm ht. (for EE AEE Table).
2
40000
80000
... More
code30 - Mid Back Revolving Chairs The chair shall come with the dimensions of 76.3cm (W) 76.3cm (H) 85.597.5cm (H). The seat height shall be 42.554.5cm. The back size shall be 47.5cm (W) 58.0cm (H). The seat size shall be 47cm (W) 48cm (D). The seat and back shall be made up of 1.2 0.2cm thick hot pressed plywood and upholstered with fabric upholstery covers and molded polyurethane foam. The back foam is designed with contours lumbar support for extra comfort. The seat has extra thick foam on front edge to give comfort to popliteal area. The High Resilience Polyurethane foam is molded with the density of 452 Kg/m3 and hardness load 162 Kgf as per IS: 7888 for 25 compression. The one piece armrests are molded from black co-polymer Polypropylene. The chair shall be 360 degree revolving type and shall be designed with upright position locking with tilt tension adjustment. The seat/back tilting ratio shall be 1:3. The ptwin wheel castors shall be injection molded in black nylon. And as approved by the Engineer in Charge.
30
7500
225000
... More
code31 - Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 g/m2 (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25100.50 mm of equired length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45150.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wg and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, all as per manufactus, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum moisture resistant board
61
1142
69720.56
... More
code32 - Providing and fixing tiled false ceiling of specified materials of size 59595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized 120 grams/ m2, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 2438 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and crossT of size 2425 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main Tat 600 mm center to center to form a grid of 1200 600 mm and secondary crossT of length 600 mm and size 2425 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200600 mm panel to form grids of 600600 mm and wall angle of size 24240.3 mm and laying false ceiling tiles of approved texture in the grid including, GI slotted cleats of size 27 37 251.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GIadjustable rods with galvanised butterfly level clips of size 85 30 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T- sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 g/m2 (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending
61
1544
94184
... More
code33 - Supplying and installing at site Steel Storage Racks of Size: 36 15 7 6 (w d h) made out of slotted angle rack supports of size 38 40 3mm with 6 shelves made out of 18G CR sheets with 4 side bend and additional rib at the bottom. The shelves shall be fixed to the slotted angles using Corner plates with suitable bolts and nuts and heavy duty bushes at bottom. applicable with plated bolts all round. With bushes at the bottom. The rack shall be finished with sprayed enamel paint of approved quality and shade.in enamel paint with all lead, lift and applicable taxes as per design and drawing and direction of Engineer in charge of work.
37
8200
303400
... More
code34 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.25 mm nominal dia Pipes
25
318
7950
... More
code35 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.32 mm nominal dia Pipes additional lift charges for 1st Floor
20
400
8000
... More
code36 - Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.40 mm nominal dia Pipes
20
536
10720
... More
code37 - Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step uPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work. 100 mm nominal dia Pipes
35
930
32550
... More
code38 - roviding and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require.White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
2
3082
6164
... More
code39 - Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete.Providing and fixing brass bib cock of approved quality :20 mm nominal bore
2
305
610
... More
code40 - Providing and fixing brass stop cock of approved quality require. 20 mm nominal bore C.P. brass pillar taps
2
305
610
... More
code41 - 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g
2
496
992
... More
code42 - Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
2
1220
2440
... More
code43 - Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. 1000 litres
1000
9
9000
... More
code44 - Supplying heavy gauge PVC conduit pipe ....... dia ....... mm thick confirming to IS 2509 with suitable size bends, junction boxes,adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and RCC wall/ stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.(PWD SR-2023-24 Vol-6,Part-3 P-2, I-1.1.3) 32 mm dia 2.5 mm thick
110
106
11660
... More
code45 - Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing uptowall surface complete. upto 50 mm conduit in brick wall
45
29
1305
... More
code46 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS- 694:2010. 1.5 mm2
220
26
5720
... More
code47 - do 2.5 mm2
400
42
16800
... More
code48 - do 4mm2
300
63
18900
... More
code49 - Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2 1.5Sqmm (Phase & Neutral) & 1 1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.Short point upto 3Mtr from tapping point to out let via switch box
8
269
2152
... More
code50 - do Medium point above 3Mtr upto 6Mtr from tapping point to out let via switch box
20
379
7580
... More
code51 - do Long point above 6Mtr upto 10Mtr from tapping point to out let via switch box
12
555
6660
... More
code52 - Supplying and flush mounting powder coated / galvanized metal boxsuitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall 6 Way
10
220
2200
... More
code53 - Supplying and flush mounting powder coated / galvanized metal boxsuitable for mounting modular switch plates. The box should be firmlyflush mounted after due groove cutting in Brick/Stone/C.C wall 8 Way
12
261
3132
... More
code54 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.6 Module
10
234
2340
... More
code55 - Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box.8 module
12
284
3408
... More
code56 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.6A One Way Switch
60
102
6120
... More
code57 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.Stepped Fan Regulator Two Module
8
357
2856
... More
code58 - Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket
12
171
2052
... More
code59 - Supplying & fixing miniature circuit breakers on existing MCBdistribution boards using necessary fixing materials and C Typecurve, indicator ON/OFF, energy cross-3 with Short circuit breakingcapacity of 10K and complete wiring as required confirming to IEC60898. 6-32 A SP
6
415
2490
... More
code60 - Supplying of .....feet -PVC Batten with integrated LED tube .... Wwith high quality diffuser with Life of 25000 burning hours & 70 lumen maintenance with CRI 80. Power Input: 220-240V 5060Hz & Power factor 0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. 11.3.2 LED light fitting 1 4 - 2022 W
16
690
11040
... More
code61 - Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076 twin twisted PVC insulated wires, required Nos of round blocks and clamps. On wall/ ceiling / Rafter / Girders
20
122
2440
... More
code62 - Supplying capacitor type ceiling fan complete with down rod blades,shackle, canopies etc, for operation on 230 V, 50 cycles. Single phaseAC supply conforming to ISS-374- 1979 and with double ball bearing system. 48 Sweep (1200 mm) Regular model
10
2984
29840
... More
code63 - Fixing a ceiling / Wall mounting fan of all capacities and all types tothe existing 'S'' hook with fan regulator to the existing board togetherwith supplying and fixing 5 A. ceiling rose, necessary length of23 / 0.0076 inch PVC insulated twin twisted copper wire and wiring
10
171
1710
... More
code64 - Extra length of GI pipe of class B 19mm dia for down rod
10
197
1970
... More
code65 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.
5
401
2005
... More
code66 - Supplying & Fixing Chemical earthling for grounding. Conduits, IC cut-outs & other equipments backfill compound which is non corrosive, thermally conductive, potential to permissible limits,superior Fault conduction capacity, non toxic, weather resistance & capable of achieving ohmic value less than one ohm.Using 4ft. Copper bonded rod with backfill compound
3
4528
13584
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%