Bangalore Development Authority Tender

BAMC4 - Maintain existing 250 watts. S.V. Lamp fittings/metal halide fittings by replacing the fused out lamps, chokes, ignitors, Condenser holders & protected glass etc., if any in the existing HPSV fittings using a ladder jeep for a period of one year (should replace as and when the componeents fails for any no. of times & should see that the S.V Lamp/ Metal halide fittings burns through the contract period i.e, 365 days with all lead & lift , loading & unloading charges as per instructions of Engineer in charge.

BAMC5 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70Percentage, maximum light intensity should be between 60 degrees to 70 degrees. CCT greater than 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire greater than IK08. Power Factor greater than0.9 with mains, Surge Protection Min 5KV along with Over voltage/Over load, short circuit/ miss wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencygreater than130lm/w, nominal CRI greater than75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. As per KPWD specification and direction of the engineer in charge of work.LED Streetlight 90 Watts

BAMC6 - Fixing of halogen / Metal halide/ SVL/IL/ LED flood light fittings over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. as per KPWD Norms and direction of the Engineer in charge of work.

BAMC7 - Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL/LED street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts ,nuts and wiring using suitable capacity wires etc complete.as per KPWD Norms and direction of the Engineer in charge of work. Using 32mm dia G.I.pipe

BAMC8 - Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. as per KPWD Norms and direction of the Engineer in charge of work. 300x450x214mm

BAMC9 - Wiring for lighting/power circuit using one of FRLS PVC insulated 1100v grade, multistrand Copper with low conductor resistance single core cable in open or concealed system of wiring with specified IS 694:1990 & confirming to the attached As per KPWD specification and direction of the engineer in charge of work. GTP 2.5 Sqmm

BAMC10 - 1.1kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wire as per IS 694:2010. As per BESCOM specification and direction of the engineer in charge of work. PVC wire 4 Sqmm

BAMC11 - 1.1kV Class HR (Heat Resistant) PVC Insulated & Sheathed Aluminium Single Core Lead wire as per IS 694:2010. PVC wire 10Sqmm (As per BESCOM specification and direction of the engineer in charge of work.

BAMC12 - Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross 3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. 50 63 Amps DP As per KPWD specification and direction of the engineer in charge of work.

BAMC13 - Fabricating supplying and mounting MS box made out … SWG suitable for floor / wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped with tamper proof locking arrangements, with suitable size clamps with necessary cable entry pipe with gland and box should be finished with 7tanks treatment with powder coated paint and finally finished with approved colour etc., complete. 16 SWG As per KPWD specification and direction of the engineer in charge of work.

BAMC14 - Supplying and fixing of solar lux level street light control switch single phase including suitable capacity contactor. As per KPWD specification and direction of the engineer in charge of work.8 KW )

BAMC15 - Supplying and fixing Micro processor based electronic timer (without contactor) Din mounting using necessary bolts, nuts and washers etc. 3x120 sec settings.As per KPWD specification and direction of the engineer in charge of work. b) Group 'A'

BAMC16 - Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC 3 Rating and as per IS 13947As per KPWD specification and direction of the engineer in charge of work. a) 65Amps

BAMC17 - Supply and fixing of Transformer Distribution Box for 250KVA TC with MCCBs.As per KPWD specification and direction of the engineer in charge of work.

BAMC18 - Transformer Repairs Scope: Repairs and Reconditioning of 11KV class single coil/multi coil Conventional (Aluminium wound) and 3/4/5 Star Rated failed Distribution Transformers of various Capacities and Conversion of CSP to Conventional bolt & nut type on lumpsum percentage (Percentage) basis (Material, Labour & Salvage) 7 DTC's including Oil and transportation (Lumpsum) at Transformer repair cente: 250KVA, Aluminium Wdg 3/4/5 Star As per BESCOM specification and direction of the engineer in charge of work.

BAMC19 - Jungle Clearing: 3 Mtr Corridor (1.5 Mtr on either side of line)Trimming of trees and branches and clearing as per IE Rules.