Bagalkot Town Development Authority Tender

code 04 - Providing and laying Ductile Iron pipes of class ----- conforming to IS 8329:2000 with latest amendments, conveyiing to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations, cutting of pipes wherever necessary, jointing with DI specials (excluding cost of specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost to include soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials. (The contractor will make his own arrangements for water for testing. Earth work excavation in trenches to be measured and paid for seperately) Note: In sewerage projects for internal cement mortal lining ( CML ) of DI pipes, if High Alumina Cement ( HAC ) as recommended in Annexure B clause 16.3 of IS8329:2000 is considered in place of Slag or Sulphate Resistance Cement ( SRC ), the cost of pipes may be increased by 5-6% from the prices listed. For DI K7 pipes:300mm dia pipe (Common SR Vol-5 2021-22 Pg. No.85 It.no.1.5)

code 05 - Providing and laying Ductile Iron pipes of class ----- conforming to IS 8329:2000 with latest amendments, conveyiing to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations, cutting of pipes wherever necessary, jointing with DI specials (excluding cost of specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost to include soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials. (The contractor will make his own arrangements for water for testing. Earth work excavation in trenches to be measured and paid for seperately) Note: In sewerage projects for internal cement mortal lining ( CML ) of DI pipes, if High Alumina Cement ( HAC ) as recommended in Annexure B clause 16.3 of IS8329:2000 is considered in place of Slag or Sulphate Resistance Cement ( SRC ), the cost of pipes may be increased by 5-6% from the prices listed. For DI K7 pipes:200mm dia pipe (Common SR Vol-5 2021-22 Pg. No.85 It.no.1.3)

code 06 - Providing and laying Ductile Iron pipes of class ----- conforming to IS 8329:2000 with latest amendments, conveyiing to work site, rolling and lowering into trenches, laying true to line, level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations, cutting of pipes wherever necessary, jointing with DI specials (excluding cost of specials) and rubber gaskets, cleaning the socket and spigot end with soap solution, applying soft soap to the socket and spigot ends before insertion of rubber gaskets, jacking and fixing in perfect conditions etc. The cost to include soap solution, soft soap, waste etc. and giving necessary hydraulic test to the required pressure as per ISS with all lead and lifts and cost of all jointing materials. (The contractor will make his own arrangements for water for testing. Earth work excavation in trenches to be measured and paid for seperately) Note: In sewerage projects for internal cement mortal lining ( CML ) of DI pipes, if High Alumina Cement ( HAC ) as recommended in Annexure B clause 16.3 of IS8329:2000 is considered in place of Slag or Sulphate Resistance Cement ( SRC ), the cost of pipes may be increased by 5-6% from the prices listed. For DI K7 pipes:100mm dia pipe (Common SR Vol-5 2021-22 Pg. No.85 It.no.1.1)

code 07 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For Suilce Valve of PN 16.0 and 300mm (Common SR Vol-5 2021-22 Pg. No.72 It.no.26.7)

code 08 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For Suilce Valve of PN 16.0 and 200mm (Common SR Vol-5 2021-22 Pg. No.72 It.no.26.5)

code 09 - Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of ductile iron (DI) conforming to IS- 1865 and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 only. The stem sealing should be with toroidal sealing rings (minimum 2 “ O “ rings). Body and bonut should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) For Suilce Valve of PN 16.0 and 100mm (Common SR Vol-5 2021-22 Pg. No.72 It.no.26.3)

code 10 - Providing and fixing of Extension spindle rods,PN 10 /16 suitable for Gate valve of following dia for open and closing application, Extension Spindle lengths shall be available on required sizes as per site conditions, spindle shall be of fixed type, suitable size of MS Square bar epoxy coated, bottom adaptor & Spindle cap (epoxy coated /galvanised) ductile iron grade of EN1563 EN-EJS-400-15 / IS1865 Spheroidal Graphite Iron Gr40. Protection tube of PVC, Top and Bottom cover / Bottom Connector shall be made by PVC, Bolt shall be made by Zinc coated steel 8.8 Split pin shall be made by Electro galvanized, this set up should help to have a buried application of Gate Valves etc., as per the directions of the Engineer-in-Charge. 50 - 150mm dia (Common SR Vol-5 2021-22 Pg. No.78 It.no.47.1)

code 11 - Providing and fixing of Extension spindle rods,PN 10 /16 suitable for Gate valve of following dia for open and closing application, Extension Spindle lengths shall be available on required sizes as per site conditions, spindle shall be of fixed type, suitable size of MS Square bar epoxy coated, bottom adaptor & Spindle cap (epoxy coated /galvanised) ductile iron grade of EN1563 EN-EJS-400-15 / IS1865 Spheroidal Graphite Iron Gr40. Protection tube of PVC, Top and Bottom cover / Bottom Connector shall be made by PVC, Bolt shall be made by Zinc coated steel 8.8 Split pin shall be made by Electro galvanized, this set up should help to have a buried application of Gate Valves etc., as per the directions of the Engineer-in-Charge. 200 - 450mm dia (Common SR Vol-5 2021-22 Pg. No.78 It.no.47.2)

code 12 - Supply and fixing of fixed height surface box H-4057 MD-KU with PP 40% GF Lid, Housing of PA+, Locking clip of PP with Notched bolt M 12 x 130 hexagon head A2-70 for service connection valves, design derived from DIN 4057, should be supplied with Support tile I (FSL, FSS, SI). Should be able to receive class AA traffic loads. (Common SR Vol-5 2021-22 Pg. No.79 It.no.52)

code 13 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Socketed D.I. Equal Tees 300mm X 300mm X 300mm (Common SR Vol-5 2021-22 Pg. No.56 It.no.3.5)

code 14 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Socketed D.I. Equal Tees 200mm X 200mm X 200mm (Common SR Vol-5 2021-22 Pg. No.56 It.no.3.3)

code 15 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Socketed D.I. Equal Tees 100mm X 100mm X 100mm (Common SR Vol-5 2021-22 Pg. No.56 It.no.3.1)

code 16 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 . All Socketed Bends 300mm diameter 450 (Common SR Vol-5 2021-22 Pg. No.55 It.no.1.19)

code 17 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 . All Socketed Bends 300mm diameter 900 (Common SR Vol-5 2021-22 Pg. No.55 It.no.1.20)

code 18 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 . All Socketed Bends 200mm diameter 900 (Common SR Vol-5 2021-22 Pg. No.55 It.no.1.12)

code 19 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 . All Socketed Bends 100mm diameter 900 (Common SR Vol-5 2021-22 Pg. No.55 It.no.1.4)

code 20 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Socketed D.I. Un-Equal Tees 300mm X 200mm (Common SR Vol-5 2021-22 Pg. No.56 It.no.5.13)

code 21 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Socketed D.I. Un-Equal Tees 300mm X 100mm (Common SR Vol-5 2021-22 Pg. No.56 It.no.5.11)

code 22 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Socketed D.I. Un-Equal Tees 200mm X 100mm (Common SR Vol-5 2021-22 Pg. No.56 It.no.5.5)

code 23 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All Socketed D.I. Reducers / Tapers 300 X 200 mm (Common SR Vol-5 2021-22 Pg. No.58 It.no.7.11)

code 24 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All D.I. Flanged MJ COLLAR MJ COLLAR 300.00 mm (Common SR Vol-5 2021-22 Pg. No.60 It.no.10.5)

code 25 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All D.I. Flanged MJ COLLAR MJ COLLAR 200.00 mm (Common SR Vol-5 2021-22 Pg. No.60 It.no.10.3)

code 26 - Suppling Ductile Iron Push on special confirming to IS 9523:2000 - All D.I. Flanged MJ COLLAR MJ COLLAR 100.00 mm (Common SR Vol-5 2021-22 Pg. No.60 It.no.10.1)

code 27 - Rubber Gasket SBR Quality 300mm dia. (Common SR Vol-5 2021-22 Pg. No.37 Sl.no.1271)

code 28 - Rubber Gasket SBR Quality 250mm dia. (Common SR Vol-5 2021-22 Pg. No.37 Sl.no.1270)

code 29 - Rubber Gasket SBR Quality 200mm dia. (Common SR Vol-5 2021-22 Pg. No.37 Sl.no.1267)

code 30 - Rubber Gasket SBR Quality 100mm dia. (Common SR Vol-5 2021-22 Pg. No.37 Sl.no.1264)

code 31 - Providing, fabricating, supplying and fixing at site various diameter MS MJ ends with dummy plates (END CAPS) to suit CI / DI spigots end as per the sketch. The cost is inclusive of all materials, i.e, rubber ‘O’ rings, flanges, bolts and nuts, dummy plates, consumables, hire charges, tools and welding equipments, lead and lifts, etc. complete as per the instructions of Engineer in charge. For CI / DI pipes of 300mm dia. (Common SR Vol-5 2021-22 Pg. No.76 It.no.41.5)

code 32 - Providing, fabricating, supplying and fixing at site various diameter MS MJ ends with dummy plates (END CAPS) to suit CI / DI spigots end as per the sketch. The cost is inclusive of all materials, i.e, rubber ‘O’ rings, flanges, bolts and nuts, dummy plates, consumables, hire charges, tools and welding equipments, lead and lifts, etc. complete as per the instructions of Engineer in charge. For CI / DI pipes of 200mm dia. (Common SR Vol-5 2021-22 Pg. No.76 It.no.41.3)

code 33 - Providing, fabricating, supplying and fixing at site various diameter MS MJ ends with dummy plates (END CAPS) to suit CI / DI spigots end as per the sketch. The cost is inclusive of all materials, i.e, rubber ‘O’ rings, flanges, bolts and nuts, dummy plates, consumables, hire charges, tools and welding equipments, lead and lifts, etc. complete as per the instructions of Engineer in charge. For CI / DI pipes of 100mm dia. (Common SR Vol-5 2021-22 Pg. No.76 It.no.41.1)

code 34 - Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/ trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately) M20 Design Mix Using 20 mm nominal size graded crushed coarse aggregates (Common SR Vol-1 2021-22 Pg. No.17 It.no.2.5.1)

code 35 - Laying of available burnt stone slabs 10 cms thick, rough chistle dressed on sand bed 7.5 cms to 8 cms thick and pointed with cement mortar 1:3, , including cost of materials, sand, labour, curing complete as per specifications.

code 36 - Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour with all lead & lift including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (Contractor will make his own arrangements for procuring water for testing) etc. for:PVC pipes 63mm dia., 6 kg/sqcm & class 3 (Common SR Vol-5 2021-22 Pg. No.134 It.no.1.4)