Bagalkot Town Development Authority Tender

code04 - Driver :-Labour-The Minimum Wages as per prescibed with EPF and PF shall be first week of every month.The Tenderer should provide consumables like gumboot,Gloves,Mask,Soap,Sanitiser,Uniforms,Raincoat,Medical expenses etc complete as per the directions of site engineer.The Tenderer shall report day to day working diaries to the officer incharge of work containing the list of workers engaged in Unit in Each shift along with receipts and Vouchures related to wages-

code05 - Storekeeper :-Labour-The Minimum Wages as per prescibed with EPF and PF shall be first week of every month.The Tenderer should provide consumables like gumboot,Gloves,Mask,Soap,Sanitiser,Uniforms,Raincoat,Medical expenses etc complete as per the directions of site engineer.The Tenderer shall report day to day working diaries to the officer incharge of work containing the list of workers engaged in Unit in Each shift along with receipts and Vouchures related to wages.

code06 - Operation and maintaenance of streetlighting systems including supply and replacement of all components/ materials such as lamps, chokesballasts, starter, condensers, ignitors, side holders wire etc., complete for the street lighting as per the specifications mentioned below, with engaging of personnels for street lights Switching ON/OFF including preparing of master register for each ward/division. direct, tapping bimetal and all other nature of faults etc,., to be attended by the contractor at his cost only poles with 250Watt sodium vapour lamp fitting streeet light complete with luminaries, control gears and all accessories. .. etc., complete with all lead and lift as per the directions of site engineer ( Rates as per letter no:DMS/Tech/S.L/186/09-10 Dated 20-02-2010)

code07 - Operation and maintaenance of streetlighting systems including supply and replacement of all components/ materials such as lamps, chokesballasts, starter, condensers, ignitors, side holders wire etc., complete for the street lighting as per the specifications mentioned below, with engaging of personnels for street lights Switching ON/OFF including preparing of master register for each ward/division. direct, tapping bimetal and all other nature of faults etc,., to be attended by the contractor at his cost only poles with 150 Watt Sodium vapour lamp fitting streeet light complete with luminaries, control gears and all accessories. .. etc., complete with all lead and lift as per the directions of site engineer ( Rates as per letter no:DMS/Tech/S.L/186/09-10 Dated 20-02-2010)

code08 - Operation and maintaenance of streetlighting systems including supply and replacement of all components/ materials such as lamps, chokesballasts, starter, condensers, ignitors, side holders wire etc., complete for the street lighting as per the specifications mentioned below, with engaging of personnels for street lights Switching ON/OFF including preparing of master register for each ward/division. direct, tapping bimetal and all other nature of faults etc,., to be attended by the contractor at his cost only poles with 36/40 watts fluoresecent tubelight streeet light complete with luminaries, control gears and all accessories. .. etc., complete with all lead and lift as per the directions of site engineer ( Rates as per letter no:DMS/Tech/S.L/186/09-10 Dated 20-02-2010)

code09 - Wiring for lighting/power circuit using one of PVC insulated 1100V grade, stranded Aluminium wire single core in open or concealed system of wiring.10 sqmm(PWD Banagalore Electrical 2019-20l SR PgNo:7 Ino:2.7.3)

code10 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990-3C x 2.5 mm2

code11 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990-3C x 1.5 mm2

code12 - Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.-100 A

code13 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.-50-63 A TPN

code14 - Supply and fixing of 3pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947.-40 A

code15 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter

code16 - Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 A three phase 4 wire whole current class-1 Accuracy Energy Meter.

code17 - Supplying and fixing Electronic Trivector Meter (ETV) suitable for operation LT operation and -CT operated meter in polycarbonate body in class 0.5 accuracy as per IS 14697 and completely wired.

code18 - Supplying and fixing Microprocessor based Electronic timer (without contactor, Din Mounting using necessary bolts, nuts and washers etc.,.) 3-120sec setting.

code19 - Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers.

code20 - Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets.-200 mm x 200 mm x 98 mm

code21 - Supplying & fixing LED Drivers suitable for 5700K LED fitting Outdoor Fixtures. Operating voltage range from 180V to 265V, 50Hz AC power Supply-25W 5700K suitable for outdoor LED fitting.

code22 - Supplying & fixing LED Drivers suitable for 5700K LED fitting Outdoor Fixtures. Operating voltage range from 180V to 265V, 50Hz AC power Supply-70W 5700K suitable for outdoor LED fitting.

code23 - Supplying & fixing LED Drivers suitable for 5700K LED fitting Outdoor Fixtures. Operating voltage range from 180V to 265V, 50Hz AC power Supply-120W 5700K suitable for outdoor LED fitting.

code24 - Supplying & fixing LED Drivers suitable for 5700K LED fitting Outdoor Fixtures. Operating voltage range from 180V to 265V, 50Hz AC power Supply-150W 5700K suitable for outdoor LED fitting..

code25 - 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-397516 Sqmm, 4 Core, (11 GI Strips - 4 x 0.8 mm)

code26 - 10 Sqmm, 2 Core, (9 GI Strips - 4 x 0.8 mm)

code27 - 6 Sqmm, 2 Core, (24 GI Wire - 1.4 mm)

code28 - HDPE/PLB Pipe 40/33 mm

code29 - Rubber Hand gloves 15 kV, SEAMLESS Confirming to ISS (Sample to be verified for seamless before approval) for electrical purpose

code30 - Multimeter Electromechanical Type

code31 - Electrical Safety Helmet attached with Electronic Induction Tester

code32 - Hi Visibility Reflective Jacket

code33 - Safety shoes with Two Pair of socks

code34 - Safety Belt with Accessories

code35 - Polypropyline Rope of 26 mm Dia

code36 - PVC Insulation Tapes 19 mm wide and in rolls of 10 Mtr

code37 - Fabricating, supplying and erecting Swaged tubular Pole of height ...m having three sections, and providing two coats of red oxide paint and finished with two coats of enamelled paint of approved quality and colour and M.S. base plate of suitable size welded at the bottom of the Pole(as per IS) and 40 mm dia GI/flexible PVC pipe of 1m length fitted to the heavy gauge polycarbonate control box including 5 Way connector of size 167 x 125 x 82 mm for 7.5M Pole/ 200 x 160 x 98 mm for remaining length of Pole with front opening cover, with locking arrangements and suitable capacity MCB/DP switch, The Pole shall be erected in cement concrete work (1:2:4) including excavation and refilling of planting depth of the Pole to the ground level and the coping CC shall be upto 0.6m above ground level as per IS2713-7.9m (5m Hb,165.1 mm dia 4.85 mm thick x 2m Hm, 139.7 mm dia 4.50 mm thick x 2m Ht,114.3 mm dia 3.65 mm thick) as per IS 410 SP 32

code38 - Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete-Double Arm Bracket with 2000 mm Standard 40/50 mm dia

code39 - Supply and Installation / Fixing / Provision of Pole box with HRC Fuse / MCB provision and suitable connector / terminal for 3 Ph/ 1 Ph connections with Loop-In & Loop- Out terminals for 10 mm2 /25 mm2 3.5 C AI/Ar/Cu/Ar Cable and branch out 2.5 mm2 2 core AI/Cu PVC Insulated cable, enclosed in a Thermoplastic, Polystyrene enclosure, which should be shock proof, safe, IP65(Weather Proof), rust proof, dust proof, water proof having Internally Embedded Gasket with provision for cable entry through IP65 Thermoplastic, polyamide glands and/or grommets.-200 mm x 200 mm x 98 mm

code40 - Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for working voltage upto 1100 Volts as per IS-694:1990-3C x 1.5 mm2

code41 - Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output Rated life Burning Hrs 50000 hr at Lumen Maintenance of 70percentage , maximum light intensity should be between 60 degrees to 70 degrees. CCT greaterthan 5500K, IP66 optical and electrical compartment & impact resistance of complete luminaire greaterthan IK08. Power Factor greaterthan 0.9 with mains, Surge Protection- Min 5KV along with Over voltage/Overload, short circuit/ miss-wiring protection. Compatible for pole mounting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiencygreaterthan 1301m/w,nominal CRI greaterthan 75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008. Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source.LED Streetlight 150 W

code42 - LED Streetlight 25W

code43 - LED Streetlight 70W

code44 - LED Streetlight 120 W

code45 - Hiring of Ladder Mounted Four Wheeler Vechile (Bolero/Heavy Vechile) along with Valid License,Insurance,Third Party insurance,RTO Approved with safety fixtures for attending Street Light Complaints as per the directions of Site Engineer.