Bagalkot Town Development Authority Tender

004 - Supplying & Fixing hylum brand hand plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N.F. screws. complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

005 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials nd 'C' Type curve, indicator ON/OFF, energy cross - 3 with Short circuit breaking capacity of 10K & complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. a) 5-32 Amps SP

006 - Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials nd 'C' Type curve, indicator ON/OFF, energy cross - 3 with Short circuit breaking capacity of 10K & complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. f) 40 - 63 Amps TPN

007 - Supplying……… amps rated 3phase with neutral bus bar using required capacity electrolytic alluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/ FRP/ DMC insulator which are mounted on powder coated 40 x 6 mm MS Flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete. (6.38/49) 100Amps 4 x 30 x 6mm Alluminium Strips. complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

008 - Fabricating, supplying and Erection of… Mtrs long hot dip galavanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, including suitable boards, bakelite sheet and MCBs as per IS specifications suitable to withstand the wind speed of 1180kmph for. Mtrs pole having dimensions bottom .mm, top .mm with 3/4mm thick suitable base plate and 4nos of . long J bolts along with template and the pole shall be galvanized with not less than 65micron etc., (With out foundation - for foundation details refer prevaling Civil SR) 9 Mtrs - Top 70mm & Bottom 155mm dia (5.14.7/35). complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

009 - Supplying & fixing of Hot dip Galvanized M.S. bracket suitable to out door luminaries and mounted on octogonal pole using necessary bolts, nuts etc., complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. Single Arm Bracket with 1500mm standard

010 - Supplying & fixing of Hot dip Galvanized M.S. bracket suitable to out door luminaries and mounted on octogonal pole using necessary bolts, nuts etc., complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. Double Arm Bracket with 1500mm standard

011 - Supply of LED Street Light with pressure die at cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission index, delivering superior light output. Rated life burning Hrs. 50000 Hr at Lumen maintenance of 70%. CCT - 5500K, IP 66 optical & electrical compartment & impact resistance of complete luminarie IK 08. Poer Factor -0.9 with mains current should not be greater than 0.1A to 0.7A & surge protection - Min 4KV along compatible for pole mounting with outer dia of 40mm to 50mm. Universal voltage driver to operate wide voltage range from 100v to 270v 50/60 Hz application. Over load & short circuit protection ensures reliable operation inspite of problem in output side. Complaince to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHs. UL approved MCPCB. Top access street light with single with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with LED Streetlight 65/70 W System Powder consumption. LED Efficiency - 1301 mm/ w at 1 W & Fixture efficiency-801 m/ w with nominal CRI - 75. Luminaire manufacturer should have in house facility accerdited by NABL/ CPRI & any Govt. certified agency & Design & Development facility certified by ISO 9001 : 2008. Housing with supplier word mark/ name shall be engraved/ embossing on the die cast housingp/ Body part. Warranty of 5 yrs against any manufacturing defect working under standard electrcal conditions as mentioned above should be given by LED source manufacture. Suitable for B1/B2 Roads as per IS 1944 Part I & Part II. LED Street Light 65 Watts (26/4.35.2). complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

012 - Fixing Halogen/metal hallide/SVL/IL/ LED floodlight fitting over existing pole/ wall ceiling including clamps, bolts nuts and wiring using suitabl capacity wires complete

013 - Supplying of 1.1 KV LT UG cable having aluminium conductor PVC insulated, extruded, innear sheathed, galvanised, steel strip (except 2 c x 10 Sqmm wire armoured) confirming to IS 3975 : 1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS 1554 Part 1988 & confirming to the attached GTP of Group A complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. 4 Core 16 Sqmm

014 - Supplying of 1.1 KV LT UG cable having aluminium conductor PVC insulated, extruded, innear sheathed, galvanised, steel strip (except 2 c x 10 Sqmm wire armoured) confirming to IS 3975 : 1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS 1554 Part 1988 & confirming to the attached GTP of Group A (7.4/55). complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. 3.5 Core 25 Sqmm

015 - Supplying & drawing Flexible Multicore Cable Manufactured with electrolytic grade copper with flexible copper conductor confirming to table 3 class 5 of IS 8130 - 1984 and PVC insultaion and shealthed sutable for working voltage upto 1100 Volts. As per IS - 694:1990 & confirming to the attached GTP of Group A.2 core 2.5 Sqmm.complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

016 - Supplying and Fixing Microprocessor based astronomical timer Switch with using necessary bolts, nuts and washers etc., . complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

017 - Supply & fixing of 4pole power contractor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers & wiring etc., complete with AC - 3 Rating and as per IS - 13947. 60 - 70 Amps complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

018 - Supplying & fixing HRC fuse units base on existing switch/panel board. 63A to 125Amps complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

019 - Supplying and fixing HRC fuse link on existing switch fuse base. Upto 63Amps complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

020 - Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the matter board using 40mm dia 2.90mm thick GI pipe 2.5mtr long buried in a pit. The pit should be filled with equal proportion of salt and charcoal 150mm alround the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI Specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and checknuts etc., the pipe shall have 16 through holes of 122mm dia. . complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

021 - Supplying and running GI/Copper strips for grounding connections, using necessary fixing materials as required 8 SWG. complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

022 - Digging of trench of 0.6m deep x 0.50mtr wide refiling the trench to the required ground level and consolidating etc., complete. complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. In Soil (Ordinary)

023 - Digging of trench of 0.6m deep x 0.50mtr wide refiling the trench to the required ground level and consolidating etc., complete. complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. Asphalt Cutting

024 - Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe/ stoneware pipe/ on wall/ on pole as required. (7.8/61). complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. 6 Sqmm to 16 Sqmm

025 - Labour charges for laying of 1.1 KV class UG cable when supplied agency in existing trench GI pipe/ stoneware pipe/ on wall/ on pole as required. (7.8/61). complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. 25 Sqmm to 75 Sqmm

026 - Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1KV class (metal only) (7.14/62) 19/20mm. complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

027 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. 2.5sqmm

028 - Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work. 16sqmm

029 - Providing and fixing to wall, ceiling and floor high density polyethylene pipes 6.00 kgf/sq.cm working pressure of outside diameter raising mains & exposed distribution pipes with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM and testing complete as per specifications.

030 - KSRRB M2100-2.2. Earthwork in excavation for foundation of buildings Culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in ordinary soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with all lead after breaking of clods complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work

031 - KSRB 4.1.6 : Poviding and laying in position plain cement concrete of mix M20 with OPC cement @300kgs with 20mm and down size graded granite metal coarse aggregates @0.64cum and fine aggregates @0.43cum with super plasticiser @ 3 Its confirming to IS exceeding 15cm thick, well compacted, in foundation, plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No.KBS4.1,4.2

032 - KSRB 4.2.2 Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69 cum and fine aggregates @0.460 cum, with super plasticizer @ 3 liters confirming ro IS 9103-1999 reafirmed-2008, machine mixed, concrete laid in layers not exceeding 15cms thick, vibrated for all works in foundation for footings, pedastals, retaining walls, return walls, walls(ant thickness) including attached pilasters, columnspillars, posts, struts, buttresses bed blocks, anchor blocks and plinths etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.

033 - KSRB 4.9.2 : Providing T.M.T steel reinforcement for RCC work including straightening , cutting, bending, hooking, placing in position, lapping and / or welding where ever required, tying with binding wire and anchoring to adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid ) cost of materials, labour, HOM of machinery complete as per specification with all lead and lift and as directed by the Engineer-in-charge of work.Fe 500