Bagalkot Town Development Authority Tender

supplying and laying double wall corrugated DWC HDPE pipe including all necessary connecting sockets /Coupling /Tees ?bends/End caps of same materials in nexisting trench as per IS 14930 part II suitable for drawing UG Cables 040mm OD/32 mmID 7.20.1 cutting6.6.5SCHEDULE OF RATES FOR ELECTRICAL WORKS 2014-15 (INCLUSIVE GST)

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 4 core 16 sqmmSCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 6.4.4

Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 6.5.1 6 sqmm to 16 sqmm In existing trench/duct.

Supplying and fixing angle iron frame work fabricated out ofM.S. angle iron.. and M.S. flat … with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. 75x75x6mm SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.41.3

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the following sizes. 16 sqmm SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 6.17.6

Supplying and making straight through cable joint with epoxy resin including ferrules and other jointing materials for PVC insulated and PVC sheathed steel tape, wire armoured aluminium conductor 4 core cable of 1.1 KV grade of the following sizes.SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 6.12.2 10/16Sqmm

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only)19/20mmSCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 6.11.1

Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable.SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No6.7

Supplying ......... amps rated 3phase with neutral bus bar using required capacity electrolytic aluminium strips covered with heat shrinkable coloured PVC sleeve, mounted on phenolic/FRP/DMC insulator which are mounted on powder coated 40x6mm M.S.flat frame work in existing panel board. The bus bar shall have suitable holes for termination of incoming and outgoing cables as per IS specification with necessary bolts, nuts and washers etc., complete.100Amps 4x30x6mm Aluminium Strips SR 2019-20 Bengalore Circle Item No 5.40.1

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.48

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20"x20"x2.5" SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.6.6

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32Amps SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.7.2

Supplying and fixing HRC fuse units base on existing switch/ panel board. 32 to 63 Amps SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.9.2

3phase energy metersupplying afixing and wiring electronic 10 to 40 amps three phase 4 wire class -1 Accuracy Energy meter a)groupA item-26-a) page39 SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 6.33

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947. 40 Amps SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.13.2

Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Double Arm Bracket with 2000mm Standard 40/50MM dia SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 4.7.6

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440v A.C. 50 Hz 12/24v D.C. SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.38

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of Overload and Short circuit with thermal Magnetic/Micro processor release and Earth Fault as per IS-13947. ( Icu = Ics) SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.14.1 100Amps 25kA.

Supplying, fixing and wiring Earth Leakage Miniature Circuit Breaker (ELMCB) 240/450V up to 300mA sensitivity on existing wood/panel board.32-40 Amps 4 pole SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 5.20.3

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with W System Powerconsumption. LED Efficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. SCHEDULE OF RATES FOR ELECTRICAL WORKS 2019-2020 Item No 12.8.6 LED Streetlight 150 Watts