Bagalkot Town Development Authority Tender

"KSRRB 500-2. Cleaning the existing black topped surface with brooms, soft brushes and finally dusting with old gunny bags and / or compressed air to receive bituminous treatment including cost of all materials, labour, HOM of machineries complete as per specifications. MORTH / Chapter 5 MORTH Chapter 5, ( P.158, I.No.21.2) "

"KSRRB 500-7Providing and applying tack coat using 80/100 Bitumen(VG10) on the prepared black topped surfaces at 2.50kg per 10 sqm, heating bitumen in boiler fitted with spray set (excluding cleaning of road surface) including cost of all materials, labour, HOM of machineries complete as per specifications.MORTH Chapter 5, ( P.158, I.No.21.7) "

KSRRB:500-11: Providing and laying bituminous machadam on prepared surface with crushed coarse aggregates as per design mix formula for base/binding course including loading of aggregates with F.E.loader hot mixing of stone aggregates and bitumen in hot mix plant 40 tonne capacity, transporting the mixed materials in tipper to paver and layinmg mixed materials with paver finisher to the required level and grade, rolling by power roller to achieve the desired density. 50/75 mm compacted thickness with 3.3% bitumen but excluding cost of primer/tack coat with lead upto 1km including cost of all materials, labour,HOM of machineries complete as per specifications. MORTH/chapter 5 -Do- using 40/60 TPH capacity H.M.P with mechanical paver Gr-II(50mm to 75mm)with 3.4% VG-30 Bitumen (I.No.21.11.6, P.NO.159)

"KSRRB M 500-18. Providing and laying semi dense bituminous concrete 25 mm thick with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder at 4.5 to 5% mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tendem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects as per specifications. -Do- using 40/60 TPH capacity H.M.P with mechanical paver Gr-II(25mm to 30mm)with5% VG-30 Bitumen (P-160 I-21.20.6) "

"KSRRB 800-1. Painting two coats after filling the surface with synthetic enamel paint in approved shades on new plastered concrete surfaces, with materials, labour complete as per specifications. MORTH Chapter 8 (I No. 24.1 P.N.180 PWD SR-2018-19) "

KSRRB M800-13.Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface:- Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications. MORTH Specification No. 803 ( I.No.24.15, P.No.182)

KSRRB MS00-35. Supply and lnstalltion of Moulded Shank Raised Pavement Markers made of polycarbonate and ABS(Acrylonitrile Butadiene Styrene) moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to Specifications of Category A of MORTH Circular No RW/ NH/33023/10-97- DO Ill Dt 11.06. 1997. The height, width and length shall not exceed 50 mm, 1DO mm and 102 mm and with minimum reflective area of 13 Sqcm on each side and the slope to the base shall be 35 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 mm and height not less than 30 mm) from the body is to be a minimum value of 500 Kg. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer's recommendation and complete as directed by the engineer ( I.No.24.41, P.No.187)

"Retro-Reflectorised Traffic Signs Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of high intensity grade sheeting vide Clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 em x 45 em x 60 em, 60 em below ground level as per approved drawing. 600 X 450 mm - TYPE XI"

KSRRB MS00-10 Painting new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade complete as per specifications. ("ii) English and Roman - Hyphen and the like not to be measured and paid for"half letter shall be counted as half)" MORTH Specification No. 803

"KSRRB M300-53. Construction of embankment with approved material Gravei/Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300-2 complete as per specifications, including cost of gravel/ murrum, watering charges & compaction by vibratory roller to 95% of modified proctors density. MORTH Specification No. 305"