Archaeology And Museums Department Tender

Dismantling Madras terrace jack arch roof including rafters and stacking the materials with a lead upto 50m and removing the debris to a distance upto 200m.

Providing fresh lime plaster to brick masonry of 10mm lime mortar (slaked lime : sand) 1:2 proportion as base coat and finishing coat of 10mm of lime mortar (slaked lime : sand) 1:1 proportion including rounding or chamfering corners, arrises, junctions, etc wherever required smooth rendering, including jute netting, lead charges for lime and sand, lift charges above 3mt height providing and removing scaffolding, grinding machine, cost of materials, labour, curing etc., The dashing of the first coat to be done using a strong whipping motion at right angles to the face of the wall. The plaster shall be trowelled hard and tight forcing it into joints to obtain a good bond and surface rubbed smooth with a plaster’s trowel complete as per specification and IS 2394 (1984). Curing shall be started 24 hrs after finishing the plaster. The plaster shall be kept wet for a period of 7 days etc complete asper direction of the Engineer in charge of the work.

Repairing door and window frames with available wood to the required size.

Repairing and fixing shutters (panelled or glazed) to doors, windows, ventilators and cupboards.

KSRB 15-17.1 : Applying priming coat over new wood surface and / or wood based surface with white lead paint priming including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications.

KSRB 15-17.6 : Providing and applying painting two coats (excluding priming coat) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning surface of all dirt, dust, and foreign matter, sand papering including cost of materials, labour, complete as per specifications.

Providing and finishing external walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. (P.No. 124, I.No. 15.104 of CSR 2015-16).

KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs.

KSRB-6.2.3: Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 5.0 Newton per sqmm (table moulded) with cement mortar 1:3 for basement and superstructure including cost of materials, labour charges, scafflolding, curing complete as per specifications.

Providing and laying Madras terrace as per design and direction with one course of special made (7"x 2.5"x 1.5") Bricks wire Cut quality plan sized brick on edge set in 1:3 lime M ortar one course of flat Brick in same size (Header) and allowed to set for 15 days in getal curing to providing and apply 1:3 lime bat cobba of avarage 6" thick with suitable slope to drain mouth etc., rammed as per instruction at the rate of 2 working shits per sqm of one helper cured jently and clay/suitable flooring tiles laid over the surface set in 03:1:3 lime mortar etc., complete with all lead and lift and asper the direction of incharge Engineer in the work. (Excluding Wooden Materials)

Providing lime concrete terracing on roofing, for weather proof course, average thickness 100mm, laid to slope with 25mm nominal size brick jelly and 50% lime surkhi mortar 1:2 (one lime putty two surkhi ) rammed and finished with gur and Belgiri treatment rounding off junctions with parapets including cost of materials, labour complete as per specifications.

KSRB-10.2: Providing and laying in position Yelahanka tiles of size 250 x 250 mm of approved quality and make, over a bed of cement mortar 1:3 an average thickness 25mm over weather proof course and pointed with cement mortar 1:3 mix with red oxide including curing cost of materials, labour complete as per specifications.

KSRB 9.4-1 : Providing Teak wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps ), but including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.33.

KSRB 8.6-8 : Providing and fixing on wall surface. 40 kg / sq.cm H.D.P.E. rain down water pipes 110mm outer dia. approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, complete as per specifications. dia 110mm

Fixtures for doors and windows including cost of materials, labours etc., complete

Replacing Glasses

Removing debris such as brick bats,concrete,earth wastage materials etc., beyond 5km outside the monument through vehicle including hire cherges of vehicle, crew charges, labour charges for loading & unloading etc., complete as dircted by the higher authorities. (Data Rate)

KSRB 15.2.2 Providing ruled pointing to stone slab pavements, with Lime mortar 1:3, 20mm deep, after raking joints, nicely lining, including cost of materials, labour, curing complete as per specifications.

PROVIDING TRAPEZOIDAL PROFILED SHEET Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses.

Providing and installing of approved make pre painted Galvalume iron Accessories, like, plain, ridges, plain gutter, plain flashing, corner Trim, etc. The total coated thickness (TCT) of the sheet shall be 0.47 mm +/- 0.02 tolerance mm Zinc-Alu Alloy coating AZ 150 gsm as per ASTM 1397/755 -550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling / self tapping screws of 25 mm length. (width upto 500-600 mm only), to be fixed over the existing purlins, rafters, channels and trusses.

Electrification works (DDO)

Water Supply works (DDO)