Archaeology And Museums Department Tender

complex mannur

rose mix

neem cake

pesticide

termite

Labour charges for maintenance of entire garden within the premises for one year of Outer and Inner Premises . The Maintenance of garden palace by horticulture gardener labourer’s as per the directions

KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

KSRB 11-7.3 : Providing and fixing white vitreous china clay, flat back, lipped front urinal basin of 430x260x350mm in the range of three with 7.5 litres PVC automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

KSRB 11-11.1 : Providing and fixing white vitreous china clay, flat back wash basin size 630x450mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11.

KSRB 11-10.1 : Providing and fixing white vitreous china clay, squatting plate with 5 litre P.V.C automatic flushing cistern including brass coupling C.I / M.S brackets, G.I flush pipe of standard size and C.P. brass spreaders painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

KSRB13-6.1-3 : Providing and fixing in position brass bib cock of approved quality 25mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications. Specification No.KBS 13.2.2 / 13.3

Supplying…..feet- PVC Batten with integrated LED tube………W with high quality diffuser with Life of 25000 burning & 70% lumen maintenance with CRI>80. Power Input:220 240 V@ 50/60Hz & Power factor>0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condidition. 12.3.2 LED light fighting 1 x 41 - 20/22 w

Fixing all types and all capacities of 1'x4' / 2'x2' LED Light fitting sindoor on the wall ceiling / rafters/girders with necessary supporting frame, using 23/0.0076" twin twisted PVC insulated wins, required Nos of round blocks and clamps.On wall / ceiling / Rafter /girders

Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resisteivtiy 14 Ohs/Kms (Max) as per IS-39756.4.2.4 core 10 sqmm)

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete. (As per Civil SR KSRB 1-2, P-7) (Page No.41, Item No.6.6.2 In Soil (hard) 6.6.2 In soil (hard)

Providing and laying in position 100 mm dia stone ware / PVC pipe in existing trench. (Page No.41, Item No.6.8 of PW, P & IWTD Electrical SR (2019-20)

Labour charges for laying of 1.1 KV class UG calbe in existing trench GI pipe / stoneware pipe / on wall / on pole as required.6.5.2.25 sqmm to 75 sqmm

Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25 mm on pole/wall/drain crossing with necessary clamping arrangements of UG cable of 1.1KV 6.9.1 40mm

Supplying and fixing L.T. cast Iron pot heads suitable for 1.1 KV class UG cable filled with necessary itumen/insulating, compound complete with terminals, clamps, bolts, nuts and wahsers etc. (6.10.1 10Sqmm

Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anit glare clear diffuser with injection moulded polycarbonate material, delivering, superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, Maximum light intensity would be between 60 degrees to 70 degress. CCT>5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor > 0.9 with mains, Surge Protection. Min 5 KV along with Over voltage /Overload, short circuit /miss/wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 adherence with RoHS. UL approved MCPCB. 9001:2008. Housing with supplier word mark / name shall be Engraved /Embossing on the die cast housing /body part. Warranty of 2 years against any manufacturing defeect workign under standard electrical conditions as mentioned above should be given by LED manufacturere & Cree/Nichia/Lumileds/Osram make LED Source. 12.8.3 LED Streetlight 70 watts

Supplying and Fixing…….mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using sutitable clamps, bolts, nuts and wiring using suitable capacity wires. 14.2.2. Using 32mm dia G.I.Pipe

Supplying and Fixing of LED Bulket