Archaeological Survey Of India Tender

Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in charge.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser, treads of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints as per direction of Engineer in charge

Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per m2 including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with alvanized steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer in-Charge

Reconstruction of coursed rubble stone masonry with cement mortar 1:6 with 60% old stones and 40% new stones including pointing finishing etc. complete

Providing and apply of wall care putty to the interior walls of the camp office including removing the old faded colour wash with sand paper and preparing the wall for re painting including labour and materials etc. complete

Providing and fixing of CPVC windows of three track along with mosquito net for the safety of the camp office including finishing etc. complete. providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC (Matching o RAL-9016) sections and with minimum TIO2(Titanium Dioxide) at GPHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets - grey colour having isolated drainage and reinforced with Galvanized iron profile through-out the window frame. The outer frame having an overall size of 10Smm width x 45mm height with reinforcement of 1mm thickness and Sash with overall size of 39mm x 75mm with GI reinforcement of 2mm and mesh sash of size 37mm x 58mm, Coextruded Glazing bead for fixing of glass shall be of size 20mm x 24 mm. Windows shall be provided with 6mm plain float glass, standard hardware& Multi point locking system with touch lock. Wall thickness of frame & sash shall be of 2mm-2.5mm. Maximum possible size - 2419mm x 2200mm. (The cost Is inclusive of all fixtures and separate charges for minor T&P's shall not be made)

Providing and fixing of mosquito net along with wooden frame of size 0.10 width x 0.05 thickness with beading along with fixing to the wall with nails etc complete.

Providing and fixing the sanitary items along with accessories plumbing materials along with fitting and water supply etc complete. 1. Wash Basin of size 550 x 400 mm with tap-02 Nos 2. Wash Basin of size 400 x 400 mm with tap-02 Nos 3. Floor mounted white vitreous Western WC-02 Nos 4. Diverter of Stainless steel-02 Nos 5. Jet gun with extendable flexible tube-02 Nos 6. Water over head shower of SS-02 Nos 7. Angle cock of SS-06 Nos 8. Mirror of Superior glass of good quality-04 Nos 9. Gezer if SIS marked-02 Nos 10. Towel Rain stainless steel-06 Nos 11. Soap dish stainless steel-02 Nos 12. Corner glass as per requirement at site-04 Nos 13. Waste jali for drain bathroom opening-04 Nos 14. 2" dia chlorinated chloride (CPVC) pipe-44 Mtr 15. Elbowz 2" dia CPVC-10Nos 16. Coupler 2" dia CPVC-10 Nos 17. Bend 2" dia CPVC-10 Nos 18. Control wall CPVC-01 Nos 19. FT to Joint PVC to CPVC -01 Nos 20. 1 ¼ dia chlorinated chloride (CPVC) pipe-30 Nos 21. Elbows 1 ¼ " dia CPVC-05 Nos 22. Coupler 1 ¼" dia CPVC-05 Nos 23. Bend 1 ¼" dia CPVC-05 Nos 24. Control wall CPVC-01 Nos 25. Skilled labour for attending plumbing work-8 Nos 26. Helper Unskilled labour -06 Nos 27. Construction of brick masonry chamber of approved size as per the requirement at the site. -02 Nos

Providing and fixing of M.S Grill to the windows with 12 mm square bars with 0.10 cms c/c along with 40 x 40 x 5 mm angle iron frame to the camp office including fabriction applying primer coat and painting of 2 cots with enamel painting etc. complete.

Providing and fixing aluminum partition along with existing frames and glass and new panels and rubber beadings including fixing charges etc. complete.

Providing and electrification of the camp office including removing the old line and relaying the new line etc., complete (Details enclosed) 1. PVC Electrical pipe 1" (10 feet length each)-24 Nos 2. PVC Electrical pipe 3/4" (10 feet lg each)-20 Nos 3. Junction Box 1"-36 Nos 4. Junction Box 3/4"-36 Nos 5. Metal Box 12 module -7 Nos 6. Metal Box 18 module -1 Nos 7. Metal Box 6 module – 3 Nos 8. Metal Box 4 module -4 Nos 9. Metal Box 3 module -10 Nos 10. Metal MCB Box 8 Module-1 Nos 11. Surface Box 12 Module-1 Nos 12. Surface Box 8 Module-2 Nos 13. Surface Box 6 Module-1 Nos 14. Surface Box 3 in 1 -1 Nos 15. Surface D.P-2 Nos-2Nos 16. MCB 32 Amp Double Coil-1 Nos 17. MCB 64 Amp Double Coil-1 Nos 18. MCB 20 Amp Single Coil-3 Nos 19. MCB 16 Amp Singel Coil-3 Nos 20. Wire 2.5 mm guage-5 Nos 21. Wire 1.5 mm guage -6 Nos 22. Wire 1 mm guage-1 Nos 23. 18 Module plate- 1 Nos 24. 12 Module plate-7 Nos 25. 6 Module plate-3 Nos 26. 4 Module plate-4 Nos 27. 3 Module plate-10 Nos 28. Surface box plate 12 module-1 Nos 29. Surface box plate 8 module-2 Nos 30. Surface box plate 6 module-1 Nos 31. Switch roma 6 Amps-50 Nos 32. Switch roma 16 Amps-10 Nos 33. 5 pin socket 6 amps-35 Nos 34. 5 pin socket 16 amps-10 Nos 35. PVC Round packing sheet-24 Nos 36. Angle holder-6 Nos 37. Insulin Tape-1 Box 38. Screws all sizes-1 Box 39. Gitti Pocket-5 Box 40. Sandle 3/4" & 1"-36 Nos 41. LED Pannel lights 12 Watts-23 Nos 42. Wall Mount fan-3 Nos 43. Cable 4 core UGD 25 mm-15 Mtr 44. Labour charges for concealing wiring fixing of the box insiede the wall by making grooves etc. complete-35 Nos 45. Socket with switch-35 Nos 46. Power Plug-8 Nos 47. MCB & DP Box-12 Nos 48. Panel Board fixing-1 Nos 49. Cable laying charges including digging and connections-20 Rmt

Providing and fixing of overhead tank in M.S Angle Iron frame structure including welding, one coat of red oxide and painting with suitable colour etc. complete.

Removal of debris accumulated at the back side of the camp office to keep the place hygiene including disposal of debris away from the monument by engaging tractor loading and unloading etc.

Providing and fixing of granite to the bathroom doors, windows etc to enhance the ambiance of the camp office etc. complete Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror |polished, remolded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facia and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch up, including Grubbing, curing, molding and polishing to edges to give high gloss finish etc. complete

Providing edge molding to 18mm thick Granite stone counters, vanities etc Including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in- charge.

Providing and fixing of angle iron of size of 50 x 50 x 6mm at the centre of the shed to support the tin sheet and to stop the entry of the snakes and rats inside the shed etc. complete.