All India Institute Of Speech And Hearing Tender

Removing MS Windows/ ventilators and other works wherever required as per the directions of the engineer-in-charge

Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 5.0Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructu/re including cost of materials, labour charges, scaffolding, curing complete as per specifications

Providing and laying in position plain cement concrete of mix 1:2.:4 with cement @ 240kg with 20mm and down size: graded granite metal coarse aggregate @0.69cum and fine aggregates @ 0.459 cum, machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted, in foundation plinth & cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications

Providing 15mm thick cement plaster in single coat with cement mortar 1:3, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches, cost of labour, complete as per specifications

Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per the specification. Area to be considered

Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface to give an even approved shade after thoroughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications. - with primer

Providing and fixing Veneer paneling, over the 50mm x 35mm sal wood frame work at spacing not exceeding 60Dmm c/c fixed to the wall and top covered out of 4mm thick approved quality Veneer, fixed over 12mm thick ply of approved brand, termite and water resistant, finished with melamine polish, complete including cost and conveyance of all materials, labour for all items of work HOM etc., complete as per specification

Modular Partition Providing and fixing modular partition consisting of 75mm thick MS CRCA frames powder coated, tile based system frame, 8mm thick MDF covered with Fabric of approved colour for Top file finish, 5mm thick clear ordinary glass both side Middle tile finish, or 8mm thick MDF covered with Fabric of approved colour for Middle tile finish, 9mm thick Laminate tile of approved colour for Botom tile finish, Continuous skirting level raceway will be provided. as per specifications, drawings and as directed by Engineer in charge - 75mm thick frames tile based system (Frame with Glass)

FREE STANDING TABLE FOR CABIN - WITHOUT FRAMES Providing and fixing Free Standing Table for Cabin- without frames consisting of 25 mm thick PLPB table top , 25 mm thick PLPB with edge bomded End table,18 mm thick PLPB with edge bonded Modesty, Wire manager -ABS plastic grommet one number per table Hardware-Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge - Main Table : 1500 mmW x 750mm D x 750 mm ht (Post formed table top) Side Table : 900 mm W x 450mm D X 750 mm ht

Providing and fixing conference table consisting of 25 mm thick PLPB table topedge bounded, 25 mm thick PLPB with edge bonded End table,18 mm thick PLPB with edge bonded Modesty, Hardware- Minifix assembly and screw leg., as per specifications, drawings and as directed by Engineer in charge 4800 mmX 2400mm X 750 mm Ht (20 seater) - U shaped with a top width of 600 mm

Storage Unit - wooden - One side laminate Providing and fixing woode storage unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9 mm PLY with edge bound for rear portion with Hafele fitting hinges, Hafele locks,Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge PLY STORAGE 900 mm W X 430 mm D X 750 mm Ht

Storage Unit - wooden - One side laminate Providing and fixing woode storage unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9 mm PLY with edge bound for rear portion with Hafele fitting hinges, Hafele locks,Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge. PLY STORAGE 900 mm W X 430 mm D X 1200 mm Ht

Storage Unit - wooden - One side laminate Providing and fixing woode storage unit one side laminate with 18 mm PLY/PLPB with edge bound for body, 18mm PLY/PLPB with openable shutters and individual locking system for shutter, 9 mm PLY with edge bound for rear portion with Hafele fitting hinges, Hafele locks,Minifix assembly, screw legs, Handles and tower bolt. complete as per specifications, drawings and as directed by Engineer in charge. PLY STORAGE 900 mm W X 430 mm D X 2100 mm Ht

Specification for uPVC Openable Door/window/Ventilator Providing& fixing of Openable window made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum Ti02(Titanium Dioxide) at 6PHR with TPV(Thermo Plastic Vulcanized) and lead free with gaskets -grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the openable frame. The frame having overall size of 60mm x 55mm with Gl reinforcement of 1mm thickness and openable sash with overall size of 6Dmm x 75mm and Gl reinforcement of 1.5mm thickness. Glazing bead for fixing of glass shall be of size 2Dmm x 34 mm. Windows shall be provided with 5mm plain float glass, Standard hardware with friction hing & Multi point locking system with Handle. Wall thickness of frame & sash shall be of 2mm- 2.5mm

Providing & fixing of glazed 3 Track - 2 Panel Sliding Door made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles through out the window. The sliding outer frame having a overall size of 60x45 mm with reinforcement of 1 mm thickness, super sas with overall size of 39x75 mm with reinforcement of 1.5mm thickness. Glazing bead for fixing of glass shall be of size 20x18 mm and coestruded with gasket. Fiber Glass mesh shall be provided in mesh shutter. Window/Door shall be provided with 6 mm plain float glass, stgandard hardware & multi point locking system of patio espagnolette. Wall thickness of frame, mullion & sash shall be 2-2.2 mm

Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System in module size of 600 x 600 x 16mm with Exposed Grid. Tiles having Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ;,83%, Thermal Conductivity k = 0.052-0.057 w/m K, Colour White, Fire Performance UK Class 0 I Class 1 (BS 476 pt- 6 &7)with sand texture finished Dune and suitable for Green Building application with Recycled content of 39%. The tile shall be laid on 24 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm and a load carrying capacity of 15Kgs/sqm&pull out strength of minimum 100 Kgs. The T Sections should have a Galvanizing of 90 grams per Sqm and need to be installed with Suspension system of approved make

Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on existing flooring with a special roffe adhesive for flooring and skirting etc., complete including providing spacers at required interval and removing stains etc., complete

CUBICLE WORKSTATIONS Providing and fixing CUBICLE WORKSTATIONS consisting of wings made out of 75 mm thick MS CRCA powder coated ,tile based system for main and return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm w) and one soft board (600 mmw) per workstation, Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway- one middle raceway (600mmW) below table top per workstation and continous raceway at the skirting level, Wire manager- ABS plastic grommet one number per table,Table top - 25 mm thick PLPB with straight table top End Table 25 mm thick PLPB with straightedge bound Hardware-MS powder coated corner bkt, cantilever bkt, separator hook on bkt, L bkt and Table joint plate., as per specifications , drawings and as directed by Engineer in charge - L TYPE one wing 3C) Size : 1500 mmW x 1200mm D x 1200 mm ht

STRAIGHT WORKSTATION (Frame and separator) Providing and fixing STRAIGHT WORKSTATION consisting of back to back unit made out of 75 mm thick MS CRCA powder coated, tile based system for main sprine, Separator 25 mm tghick PLPB- BSL wooden separator for return spine, Top tile finish 8 mm thick MDF covered with Fabric of approved colour and one writing board (600 mm W) and one soft board (600 mmw) per workstation,Bottom tile finish 9 mm thick Laminate tile of approved colour, Raceway- one middle raceway (600mm W) below table top per workstation and continous raceway at the skirting level, Wire manager- ABS plastic grommet one number per table,Table top- 25 mm thick PLPB with straight table top Hardware_MS powder coated corner bkt,cantilever bkt,separator hook on bkt, L bkt and Table joint plate., as per specifications, drawings and as directed by Engineer in charge - Non Sharing workstation 1D) Size : 1200 mmW x 540mm D x 1200 mm ht (Non Sharing-Post formed table top) single unit

L-SHAPE EXECUTIVE TABLE: Providing, supply of L-shape table using 25mm and 18mm thick solid core antitermite prelaminated particle board with approved colour and design as directed by the incharge. Provision for single drawers and single cupboard, CPU right hand side of the table, made out of 18mm MDF with membrane pressing with 9mm Radius, double line groove cutting, with good locking arrangement, fixing with stainless steel handles, for both side – table top 8mm plain glass with all edges shall be polishing, with good locking arrangement, cup board door 18mm MDF board, provision for keeping CPU, 18mm Telescopic key board channel, all edges should be 2mm and 0.8mm thick machine glue edge banding with necessary fixtures, bushes, screws, etc., complete. The rates including all types of taxes, loading, unloading, conveying and all other incidental charges. MR Size: 1. 1800mm(L) x 900mm (W) x 750mm (H) 2. 900mm(L) x 450mm (W) x 750mm (H)

Supply and fixing of 25mm dia PVC pipe with all fixing materials like bends, gatta, screws and clamp etc

Supply and fixing 6module of GI/modular box along with modular base & cover plate for modular switches in recess etc. as required. Make: MK Blange

Supplying and fixing of 5/6amps modular switch on the existing modular plate & switch box including connections but excluding modular plate etc. as required Make: MK Blange

Supplying and fixing of 6pin 15/16amps modular switches on the exxisting modular plate & switch box including connections but excluding modular plate etc. as required Make: Blange

Supplying and drawing 1x1.5sq mm sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required. Make: Havells

Supplying and drawing 2x2.5sq mm sizes of FRLS PVC insulated copper conductor single core cable in the existing surface/recessed steel/PVC conduit as required Make: Havells

Groove cutting for wall, fixing of 25mm dia PVC pipe

2modular face plate for fixing of new working and telephone jack connection

Removing of old DB box and old electrical fixtures

Supply and laying of 2pair copper conductor 0.65sq mm PVC insulated telephone cable make: Finolex

Supplying and fixing of 6pin 15/16amps modular socket outlet on the existing modular plate & switch box including connections but excluding modular plate etc. as required Make: MK roma

Supply and fixing of 2MD step regulator Make: MK blange

Supply and fixing of 16way metal DB box with door and neutral and earthing connection separate bus bar Make: legrand

Supply and fixing of 02pole 25amps MCBs Make: Legrand

Supply and fixing of single pole 16amps MCBs Make: Legrand

Supply and fixing of outdoor metal bus bar box with 04nos alluminium bus bars and 04pole 63Amps MCBs-1no

Supply and fixing of 04pole 63Amps MCBs: 01no

Supply and laying of 10sq mm X 04Run copper conductor FRLS flexible wire Make: Havells including PVC pipe and Junction box, gatta, bends screws etc

Providing and fixing S hook for installing ceiling fan including all masonary and finishing work as per requirement