All India Institute Of Speech And Hearing Tender

Removing of existing old or broken wash basin / urinals and disposing it with all cost and conveyance labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work

Dismantling cement concrete flooring or plain cement concrete work including removing and conveying the debris to distance upto 200m (within average thickness of 15 cms). including cost of materials, labour, HOM complete as per specifications

Earthwork excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5 m and above in width, in ordinary soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specification

Earthwork excavation for foundation of buildings, culverts, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5 m and above in width, in hard soil not exceeding 1.5m in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50m after breaking of clods complete as per specification

Excavation by manual means for foundation of buildings, water supply & sanitary lines and electrical conduits etc., either in pits or in trenches 1.50m and above in width, in soft rock / ordinary rock not exceeding 1.50mtrs in depth including stacking the excavated stuff clear from edges of excavation with lead upto 50mt including cost of explosives, labour, HOM complete as per specifications

Filling available excavated earth (excluding rock) in sides of foundation up to plinth in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with lead up to 50 m & lift up to 1.5 m, including cost of all labour complete as per specification and directions of the engineer-in-charge

Providing and fixing to wall, ceiling and floor un-plasticised ISI marked 110mm PVC pipes 10kg/sqcm working pressure chemp plast / waving or equivalent make with pipe fittings, wall clips, makinggood the wall, ceiling and floor including cost of materials, labour charges, HOM of equipments and testing complete as per specifications

Providing and fixing ISI marked 25mm dia Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 25mm nominal OD pipes

Providing and fixing 40mm dia Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 40mm nominal OD pipes

Providing and fixing 50mm dia Chorinated Poly Venyl Chloride (CPVC) pipes conforming to IS 15778 having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings, this includes jointing of pipes and fittings with one step solvent cement, trenching, refilling & testing of joints complete. (external work). - 50mm nominal OD pipes

Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 50mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications

Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 40mm nominal bore including cost of all materials, labour and HOM of equipments with all leads complete as per specifications

Providing and laying in position plain cement concrete of mix 1:2.:4 with cement @ 240kg with 20mm and down size: graded granite metal coarse aggregate @0.69cum and fine aggregates @ 0.459 cum, machine mixed, concrete laid in layers not exceeding 15cms thick, well compacted, in foundation plinth & cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications

Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 320kgs, with 20mm and down size graded granite metal coarse aggregates @0.69cum and fine aggregates @ 0.46cum, with superplastisiser @3lts confirming toIS9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in ground floor level for roof slabs, staircase, lintels, and beams retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window cills, fillets etc., including cost of all materials, labour, HOM curing, complete but excluding cost of reinforcement as per specifications

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specifications

Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for flat surface such as suspended floors, roofs (applicable for this work estimate), landings, balconies and likes, thickness above 200 mm, including cost of all materials, labour complete as per specifications specification

Providing T.M.T. Steel reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and (or welding wherever required) tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design tying with binding wire as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specification No 4.6.3 for TMT bars Fe 550

Providing 20mm thick cement plaster in single coat with cement mortar 1:3, to stone masonry & concrete surface ( for raft slab & walls in this work estimate) including rounding off corners wherever required, smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specification

Providing and fixing top manhole cover of size 60 cms x 60 cms using angle iron of size 32 mm x 32 mm x 6 mm with M.S Sheet 14 Gauge supported with 12mm square rods all-round & diagonals including cost of primer coat & 2 coats of paint, materials, labour, HOM of machinery complete as per specifications

Providing rough cement plastering 15mm thick in single coat with 1:4 cement mortar to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications

Providing and fixing colour glazed tiles of size 300x450mm for walls with borders of size 300x100mm, set in cement mortar 1:3 pointing with white cement mixed with matching colour pigment, including curing , cleaning etc., complete. The work includes cost of all materials, labour charges for all items of work, hire charges for equipment, etc., complete as per specification

Providing and fixing ceramic tiles of size 30 x 30cms for flooring, treads & landing, laid on a bed of 20mm thick cement mortar 1:3 mix and spacer jointing filled with epoxy of matching colour pigment, including curing, cleaning etc.,complete. The work includes cost of all materials, labour, curing complete as per specification

Providing and fixing polished granite sink of size 60cms x 75cms of 23cm thick, the sink portion shall be 15cm in depth of shapes oval / round / square over brick masonry in cement mortar 1:6 including cost and conveyance of all materials, labour for all items of work, HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc., complete as per specification and directions of the Engineer-in-charge of the work

Providing and fixing white vitreous china clay, water closet Orissa pattern (make: Cera/Parryware/Hindware ) of size 580 x 440mm with integral type footrests, 100mm S or P trap, 10 litre low level, P.V.C flushing cistern (all are approved make ) with fittings, C.I / M.S brackets, 32mm diameter flush pipe fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Providing and fixing white vitreous china clay, water closet European type (make: Cera/Parryware/Hindware ) ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Providing and fixing white vitreous china clay, surgeon type wash basin (make: Cera/Parryware/Hindware )size 660x460mm with a pair of 15mm C.P brass pillar taps with pair of elbow operated levers, C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Providing and fixing white vitreous china clay, flat back, lipped front urinal basin (make: Cera/Parryware/Hindware ) of 430x260x350mm in the range of four with 10 litres PVC automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G.I. clamps complete painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications

Providing and fixing 7.5 cms to 15.00 cms dia NP grating 100 mm dia

Providing and placing on ISI standard terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications

Providing and constructing burnt brick masonry with approved quality of modular bricks of standard size of class designation 5.0Newton per sqmm (table moulded) with cement mortar 1:6 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications

Providing and applying two coats with plastic emulsion paint of approved brand and shade on ceiling internal wall surface to give an even approved shade including scrapping, primer coat after thoroughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, and scaffolding etc., complete as per specifications & directions of the Engineer-in-charge

Providing and fixing factory made single leaft rigid GRP Sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using U.V-stabilized Isopthalic Gelcoat and on layer of 45 gsm E-Glass Chopped strand Mat (CSM), impregnated with orthopthalic polyster resin. The thickness of the skins shall not be less than 1.5mm. Expanded Polystyrene (EPS) structural foam panel of 29mm thickness and a density of 20 Kg/m3 shall be used as core material. Wooden reinforcements made of Seasoned Salwood block of cross section not less than 28mmx32mm and also necessary salwood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles, etc, shall be provided. A structural adhesive compatible with EPS foam shall be used for bonding the core material, the Salwood reinforcement and the skins. The material and process for manufacturing the door shutters shall confirm to RV/TIFAC Composites Design centre Standards and specifications and the door shutters tested in confiramation to IS 4020-1994. The finish of shutter will be plain colour White/Ivory/Beige/Light Grey or any other colour using high quality pigments. Exclusing cost of fixtures and inclusive of supply of shutters to respective work spot

Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM). U.V-stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0 mm. The doorframe consists of four segmens, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement of 6 locations fro high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/Plaster with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size S shaped M.S. flat hold fast shall be provided with the frame

Providing & fixing of glazed 3 Track - 2 Panel Sliding Door made out of multi chambered uPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron profiles through out the window. The sliding outer frame having a overall size of 60x45 mm with reinforcement of 1 mm thickness, super sas with overall size of 39x75 mm with reinforcement of 1.5mm thickness. Glazing bead for fixing of glass shall be of size 20x18 mm and coestruded with gasket. Fiber Glass/SS mesh shall be provided in mesh shutter. Window/Door shall be provided with 6 mm plain float glass, stgandard hardware & multi point locking system of patio espagnolette. Wall thickness of frame, mullion & sash shall be 2-2.2 mm

Providing and fixing MS grill for ventilator, angular for sunshade and truss for head room covering and OHT Platfrom safety railings using MS square flats or M.S. Square rods or combination of M.S flats and square rods as per approved design, & drawing including cutting steel sections and welding the same to required pattern with coat of red lead primer and one coat enamel painting, including cutting and making good the masonry, cost of materials, fixtures, labour and HOM of machinery complete as per specification

Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses

Constructing brick masonry inspection chamber 450mmx450mm and 450mm depth (clear inside dimension )for single pipe line using table moulded non-modular bricks of class designation 50m in cement mortar 1:5, C.I.cover with frame (light duty) 450x450mm internal dimensions, total weight of cover with frame to be not less than 38kg(weight of cover 23kgand frame 15kg)RCC top slab with cement concrete1:2:4, foundation concrete 1:5:10, with 40mm downsize metal, inside plastering 12mm thick in CM 1:3,finish smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specification

Providing, fabricating, assembling and fixing in position aluminium partitions using sections in combination of plain, single grove and double grove as per requirements for the frames of overall size 101.6mm x 44.45mm, 3.18mm.thick having section weight, plain sections 2.40kg/m single grove section 2.541kg/m. and double grovesection 2.683 kg/m and bottom 46 kg/m; aluminium louvres of size 77.6mmx27.6mm 1.7mm. thick section weight 0.483kg/m; bottom portions provided with 12mm. thick prelaminated sheet both side of approved colour lamination exterior grade; aluminium sections of mat finish or glossy finish using section, spacing of vertical member shall not exceed 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames, the assembled frame should be stiffened with corner angles stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns or masonry on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistling and making good with cement mortar to match the surface, providing and fixing bottom panel filled with the materials to a height of 0.9m. from floor level; and 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with lower sections, the glass and panels fitted with glazing clips of 19mmx17.3mm. with thickness of 0.9mm. weight 0.124kg/m; aluminium sections pre-treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable size holes and fixing with cement mortar, with necessary opening for fixing of doors of standard size (excluding cost of door opening) All the frame should be throughly cleaned free from rust,scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications. using aluminium section anodized to 12 - 15 microns

FOR CRACKS IN ROOFTOP/WALL SURFACES Providing Water proofer Capable of bridging cracks upto 2mm to 8mm in the Roof/wall surface using Spray Applied Liquid Water proffer at the rate of 0.20 ltr/sqm. Primer & chemical mortar shall be applied before applying this spray liquid water proofer. The area shall be cleaned by high pressure water jet/wire bush or by mechanical means to make it free from loose particle, dust dirt etc. _ for crack filling

Stainless steel hollow pipes 14 gauge 50mm/40mm dia

Fixing SS hand rails and welding wherever required as per the directions of the engineer-in-charge

Removing old hand wash, window and other works wherever required as per the directions of the engineer-in-charge Mazdoor light

Supply and installation of 2HP submersible pump (Kirloskar/Beacon/KSB/M&P)

Supply (2) and installation (1) of motor starter panel including 32 amps 2 pole MCB

Supply and installation of automatic micro controller water level controller including 40 mtr control wiring for over head and sump tank with 3 level sensor

Supply and installation of 32 amp 3 pole MCB type change over switch for motor selection

60*60*30 powder coated 16guage metallic panel box

Supply and fixing 3 x 4 sq mm flat submersible cable

Supply and lying of DWC pipe with 2 ft depth trench, excavation and refilling

Wiring for circuit/sub main wiring along with earth wire with the 2 x 4 sq mm + 1 x 4 sq mm sizes FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit with all necessary materials like bends, junction box, Gatta and screws