Agricultural Produce Market Committee Tender

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per specifications and as per directions including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations and other similar works etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with super plasticisers laid in layers, well compacted using needle vibrators. The cost includes all lead & lifts, cost of all materials, quality confirming to the requirements of relevant IS codes , labour, Usage charges of machinery, curing and all other appurtenances required to complete the work as per technical specifications. (The cost of steel reinforcement, dowel bars & formwork to be paid separately)M25 Design Mix Using 20 mm nominal size graded crushed coarse aggregates including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, aping/welding joints, tying with binding wire / soft annealed steel wire and other ancilary operations complete as per drawing and technical specification including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 coarse sand) With Modular bricks including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mortar 1:6 (1 cement : 6 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing and laying Polished Glazed Vitrified tiles with thickness 10 mm in floor with different sizes with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 600x600 mm including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing and laying Polished Sadarahalli Grey Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 20 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing & fixing of 2-track x 2panel sliding windows made out of multi chambered UPVC Matching to RAL9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead free, gaskets grey colour having isolated drainage and reinforced with Galvanized Iron profile through-out the window frame. The outer frame having an overall size of 50mm width x 42mmheight with reinforcement of 1mm thickness and Sash with overall size of 31mm X 57mm with Gi reinforcement of 1mm for the frame and 1.5 mm for the sash. Coextruded Glazing bead for fixing of glass shall be of size 21.5mm x 9.5 mm. Windows shall be provided with 5mm plain float glass, standard hardware& single point locking system with touch lock. Wall thickness of frame & sash shall be of 1.8+-0.2 mm. Maximum possible size 1519mm x 1519mm. (The cost is inclusive of all fixtures and separate charges for minor T&P's shall not be made) including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners ll necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S angels 40x40x6 mm for diagonal braces including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing, Laying and Fixing CPVCpipes conforming to IS 1239:1990 with latest amendments complete with CPVC fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including testing for water tightness, with all lead and commissioning (contractor will make his own arrangements for procuring water for testing) For Heavy Duty CPVC pipe of 20mm dia including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Supply and delivery at site GM (copper alloy) gate valves confirming to Class I as per IS 778 with latest amendments, 1 No. screwed in bonnet inside screw, rising spring spindle integral seat screwed females ends confirming to IS 554 1990 body hydraulically tested 1.5HP seat standard tested 1 HP with IS mark. For 20 mm dia GM (Copper alloy) Gate valves including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing and fixing PVC (S.W.R) Gully Trap 10cms x 10cms with all fitting arrangements & all necessary accessories complete including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Water purification plants: Providing, Installation and Commissioning of automatic Water purification plant (RO+UF) with all accessories piping, product water tank on single phase power supply as per the enclosed detailed Technical Specifications including cost of material, loading and unloading and as directed by the Engineer in charge. (Ref detailed specification enclosed seperatly). Note 1The above rates mentioned are only for the preparation of estimate purpose. 2. All items are to be of BSI /NFS standards,with BSI / NFS mark Tenders to be invited for procurement. No direct payment should be made under any situation or condition or on any account. 5. After commissioning of plant necessary testing to be done for the satisfactory of Engineer Incharge. Note Refer the ANNEXURE F for Detailed Specification of Each compone For250 LPH Cabin Type including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two coats) over and including water thinnable priming coat with cement primer after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two coat applied @ 1.67 ltr/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m) with paint of approved quality to give an even shade, after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth,including cost of materials labour With all and lift complete as per specifications and as per directions of Engineer in charge of the work

Total

Assistant Engineer