Agricultural Produce Market Committee Tender

code04 - Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code05 - Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code06 - Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/m2 including pointing the joints with white cement and matching pigment etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code07 - Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg/m2, including pointing in white cement mixed with pigment of matching shade etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code08 - Providing & fixing 30mm thick factory made rigid foam Panelled Door Shutters made from M.S. tube of 19 gauge thickness, size 19x19mm for stiles and 15x15mm for top & bottom rails, covered with heat moulded PVC C channel of 5mm thick sheet & 30 x 50mm wide to form stiles & 5mm thick & 75mm wide PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick 20mm wide PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet fitted in the M.S. Frame, Sealed to the stiles & rails with 5x30mm PVC sheet beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75 mm Aluminium hinges. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code09 - Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long brackets of 15x15mm M.S Square tube, the entire door frame to be reinforced with 19x19mm M.S Square tube of 19 gauge. The door frame to be fixed to the wall using M.S. Screws of 65/80mm size etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code10 - Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces including cost of materials, labour, usage charges of machinery etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code11 - Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground to the appropriate disposal area etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code12 - Dismantling tile of tiles thickness 10 mm to 25 mm work in floors and roofs laid in cement mortar includ- ing stacking material to the appropriate disposal area etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code13 - Repairs to plaster in patches of 2.5 m2 and less in walls, ceilings 10 to 20mm thick in cement mortar 1:4 including cutting the patches in proper shape and replastering the surface of the wall including disposal of rubbish including curing cost of materials, labour, etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code14 - Providing and fixing W.C. pan with ISI marked black solid plastic seat and lid white vitreous china pedestal type water closet (European type W.C. pan) 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code15 - Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code16 - Providing and fixing One urinal basin with 5 litre white P.V.C. automatic flushing cistern white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code17 - Providing and fixing Internal work - Exposed on wall Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal dia Pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code18 - Providing and fixing PTMT Circular type 100 mm nominal dia grating of approved quality and colour.etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code19 - Providing and fixing 15 mm nominal bore brass bib cock of approved quality :etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code20 - Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.

code21 - Providing UNPLASTICISED PVC Pipes of SN4, 110mm dia. conforming to IS 16098:2013 with latest amendments ended with integral sockets with ISI mark and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commissioning, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of UPVC pipes (with cost of elastomeric sealing rings) and specials (excluding cost of specials) with jointing of approved type, with all labour, lead & lifts, including encasing the pipes alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor will make his own arrangements for procuring water for testing) etc.,complete with all leads & lifts, all incidental charges complete as per drawing and technical specification and as directed by the Engineer incharge of the work.