Agricultural Produce Market Committee Tender
Karnataka, also known as Karunadu, is a state in the southwestern region of India. Karnataka was formed originally as Mysore State on 1st November 1956 and currently is the biggest state in south India. Its capital and largest city is Bengaluru. It covers an area of 191,791 km2 (74,051 sq mi) and is the sixth largest state by area comprising 31 districts. Karnataka is also a state of multiple languages; Kannada being the official and most widely spoken language in Karnataka. Other languages spoken in the state include Tamil, Telugu, Malayalam, Kodava, Konkani and much more.Karnataka tenders are issued by the government of Karnataka, public & private sector organisations. The state government issues majority of the Karnataka tenders, which are for goods and services including construction, road and bridge construction, IT services, engineering services, medical services, educational services amongst many others. Bidassist is one of the largest eprocurement portals, which offers all government tenders from across the world in one place. Bidassist offers information on all Karnataka tenders and other state and authority tenders in no time. Bidassist is a platform where users can look for various Karnataka tenders as well as other tenders.
Costs
EMD
₹ 23,80,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
APMC/2020-21/OW/WORK_INDENT4817Bid Award Id
ViewTender No
APMC/2020-21/OW/WORK_INDENT4817Tender Authority
Agricultural Produce Market Committee ViewPurchaser Address
-Website
http://www.arthapedia.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Plain cement concrete M10 mix with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing including cost of materials, labour, HOM complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH Specification No. 408
741.42
-
3011648.04
Providing and laying plain/reinforced cement concrete for side drains using M20 nominal mix concrete with OPC at 300 kgs. with 20mm and down size granite metal coarse aggregates at 0.69 cum and fine aggregates at 0.43 cum machine mixed, well compacted for walls and bottom including centering, shuttering, cost of materials, HOM of machinery, curing etc., complete excluding cost of steel as per MORTH specification No. 1500, 1700, 2200. including cost of materials, labour, HOM complete as per specifications. Wall & bottom thickness 10cm complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1193.62
-
7912506.98
Providing and laying Plain / Reinforced Cement Concrete design mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.70cum and fine aggregates @ 0.47cum, with superplasticizer @3lts confirming to IS9103-1999 Reaffirmed-2008,Open Foundation complete as per Drawing and Technical Specification including cost of all materials, labour, HOM curing, form works, scaffolding and centering complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH Specification No. 1500,1700 & 2100
251.92
-
1241461.76
KSRRB M2200-5.12. Providing and laying Design mix M25 with OPC @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008 including cost of materials, labour, HOM, curing, form works, scaffolding and centering complete as per specifications. - i) Upto 5m height
492.9
-
2590189.5
Providing and Placing Reinforced / Prestressed cement concrete in super-structure as per drawing and Technical Specification complete as per specifications. B. RCC with OPC design mix M25 @ 340kgs, with 20mm and down size graded granite metal coarse aggregates @0.7cum and fine aggregates @ 0.47cum, with superplastisiser @3lts confirming to IS9103-1999 Reaffirmed-2008, including cost of materials, labour, HOM, curing, form works, scaffolding and centering complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH Specification No. 1500,1600, 1700 & 2300 IS 456
196.73
-
1247268.2
Providing T.M.T. steel Fe 500 reinforcement for R.C.C. work including straightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per disign (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH Specification No.1600 & 2200
130
-
8932300
Filling availble excavated earth (excluding rock) in sides of foundations upto plinth in layers not exceeding 20cms. In depth compacting each deposited layer by ramming after watering including cost of all labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
499.79
-
100457.79
Providing and laying 100mm thick pre-cast cover slabs over drains of width not exceeding 800 mm using M20 concrete reinforced with steel @ 6.00 kg/Sqm, slabs jointed in CM 1:3 proportion and nicely finished including providing holes in the Cover slabs wherever necessary for easy drainage of surface water including of labour, materials, HOM, curing, lcomplete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH specifications No. 1500, 1700
5189.65
-
5698235.7
Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 300.5 complete as per Specifications. MORTH Specification No. 301 etc. complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
6901.9
-
281597.52
Compaction of original ground with maximum of 6 passes of 8 to 10 tonnes power roller including filing in depression occuring during rolling including cost of all labour, HOM of machinery complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
45657.45
-
273944.7
Construction of Embankment with Material Gravel/ Murrum. Construction of embankment with approved material Gravel/ Murrum with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement Table 300-2 complete as per specifications (which includes of cost of gravel/murrum, watering charges & campacion by vibratory roller) complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH Specification No.305
24152.87
-
13984511.73
Construction of granulor sub base Grading V as sub base and drainage layer by providing close graded material spreading in uniform layers with motor grader on prepared surface mixing with mixing in a mechanical mix plant at OMC with rotavator at OMC and compacting with vibratory roller to achieve desired density clause 401 of MORT and H including cost of labour HOM of machinery complete complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. .
2833.81
-
5270886.6
Providing, laying, spreading and compacting graded stone aggregates to wet mix macadam specifications including pre mixing the material with water at OMC Mechanical mix plant carriage of mixed method of tipper to site, laying in uniforms layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired basically complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH specification No. 406
7065.58
-
12958273.72
Providing and applying primer coat with SS bitumen emulsion on prepared surface of granular Base such as WMM including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
28262.3
-
960918.2
Providing and laying dense graded bituminous macadam using crushed aggregates of specified grading, premixed with VG30 grade bituminous binder and, transporting the hot mix to work site, laying to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to acheive the desired cpmpaction as per MORTH table 500-10 complete in all respects complete as per specifications. with all leads & lifts and as directed by the Engineer incharge of the work. using 40/60 TPH capacity H.M.P. with Machanical paver Gr-II (50mm-75mm) with 4.6% VG-30 Bitumen.
1413.12
-
10544701.44
Providing and applying tack coat using 80/100 grade bitumen (VG-10) on the prepared black topped surfaces at 2.5 kg per 10 sqm heating bitumen in boiler fitted with spray set (excluding cleaning of road surface) including of cost of all materials, labour, HOM of machineries complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH Chapter 5.
28262.3
-
395672.2
Providing and laying semi dense bituminous concrete using crushed aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with a paver finisher to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 508 complete in all respects complete as per specifications. Using 40/60 TPH capacity with Mechanical paver Gr-II (25mm to 30 mm) wth 6% VG-30 Bitumen complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
706.56
-
5616445.44
Construction of dry lean cement concrete mix M5 with OPC cement @150kgs, with 25mm and down size graded granite metal coarse aggregate at 0.86cum and fine aggregates @0.58cum Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600-1, cement content not to be less than 160 kg/cum optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mps at 7 days mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing complete as per specifications. with OPC at 150 kg/cum and coarse aggregate 0.86cum, fine aggregate 0.58cum using Concrete Batch mix Plant at 75 cum/hr capacity with Slip form paver with electronic sensor.MORTH Specification No. 601 complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
4.55
-
16084.25
Cement Concrete Pavement :- Construction of unreinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with OPC cement design Mix M30 at 360 kg per cum, with 25mm and down size graded granite metal coarse aggregate at 0.69 cum and fine aggregate and fine aggrigates at 0.46 Cum with superplastisizer at 3 lts conforming to IS ;383, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH Specification No. 602
7.58
-
36505.28
Construction of cement concrete kerb with top and bottom width 115 and 165 mm respectively, 250 mm high in M-20 grade PCC on M-10 grade foundation 150 mm thick, foundation having 50 mm projection beyond kerb stone, kerb stone laid with kerb lying machine, foundation concrete laid manually, all complete as per Clause 400.8 complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. A. Using Concrete Mixer MORTH Specification No. 408
846
-
292716
Road Marking with Hot Applied Thermoplastic Compound with Reflectrising Glass Beads on Bituminous Surface, Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads at 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. MORTH Specification No. 803
587.09
-
251861.61
Painting two coats on New Concrete Surface - Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfaces complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
338.4
-
27748.8
Providing and laying of a reinforced cement concrete pipe duct, 300 mm dia, across the road (new construction), extending from drain to drain in cuts and toe of slope to toe of slope in fills, constructing head walls at both ends, providing a minimum fill of granular material over top and sides of RCC pipe as per IRC:98-1997, bedded on a 0.3 m thick layer of granular material free of rock pieces, outer to outer distance of pipe at least half dia of pipe subject to minimum450 mm in case of double and triple row ducts, joints to be made leak proof, invert level of duct to be above higher than ground level to prevent entry of water and dirt, all as per IRC: 98 - 1997 and approved drawings complete as per specifications. Case - I : Single row for one utility service complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1448.85
-
2502163.95
Earthwork excavation and forming in embankment by manual means in all types of soils (When earth is taken from bank cutting or from soil deposits) including breaking of clods, spreading to required line and level, forming, and cost of all labour complete as per specifications. ( excluding watering and compaction of earth ) complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
211.5
-
37224
Earthwork in surface excavation for levelling and lowering the ground manually (Other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables) excavated surface levelled and neatly dressed, disposed earth to be levelled including breaking of clods and neatly dressed complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
821.4
-
204528.6
Earthwork excavation for foundation of buildings, culverts, watersupply,sanitary items and electrical conduits either in pits or in trenches 1.5 M and above in width in all types of soil not exceeding 1.5m in depth including dressing the bottoms of pits and trenches stacking the excavted soil clear from edges of excavation complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
5119.09
-
1530607.91
Earthwork excavation for foundation of buildings, culverts, watersupply,sanitary items and electrical conduits either in pits or in trenches 1.5 M and above in width in all types of soil not exceeding 1.5m in depth including dressing the bottoms of pits and trenches stacking the excavted soil clear from edges of excavation complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
741.96
-
236685.24
Earthwork excavation for foundation of buildings, culverts, watersupply,sanitary items and electrical conduits either in pits or in trenches 1.5 M and above in width in Hard soil exceeding 1.5m in depth including dressing the bottoms of pits and trenches stacking the excavted soil clear from edges of excavation complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
6.02
-
2823.38
Filling in foundation with granite / trap broken metal 100mm. and down size, with approved sand including hand packing, ramming, watering, including cost of all materials and labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
110.39
-
213604.65
Providing and laying in position plain cement concrete of mix M7.5 with OPC cement @180Kgs, with 40mm and down size graded granite metal coarse aggregate @ 0.85Cum and fine aggregate @ 0.57Cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1309.05
-
6568812.9
Providing and constructing granite / trap / basalt Size stone masonry in foundation with cement mortar 1:6, using hammer dressed size stones and bond stones at 2 m. apart in each course including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
733.07
-
3525333.63
Providing and constructing granite / trap / basalt size stone masonry in basement with cement mortar 1:6, edges of stones chistle dressed in courses not less than 15 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
280.41
-
1633388.25
Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @320Kgs, with 20mm and down size graded granite metal coarse aggregate @ 0.69 cum and fine aggregate @ 0.460 cum, with superplastisiser @3ltrs confirming to IS 9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for all works in foundation for footings, pedestal, retaining walls, return walls, ( any thickness) including attached plasters, columns,pillars, posts, struts, buttresses,bed blocks, anchor blocks,& plinth etc., including cost of all materials, labour, HOM of machinery, curing, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
162.27
-
914391.45
Providing and laying in position REINFORCED cement concrete of mix M25 with OPC cement @340Kgs using 20mm and down size graded granite metal coarse aggregate @ 0.70Cum and fine aggregate @ 0.47cum with super plastisiser @ 3Ltrs confirming to IS 9103-1999 reaffirmed-2008 using 20mm and down size graded granite metal, concrete laid in layers not exceeding 15 cms. thick, well vibrated for all works in foundation and plinth and ground floor level for Roof Slab,Staircases, lintels, Retaining walls, Return walls, including attached palsters, columns piers, abutments, pillars, posts, studs, butresses, strings or lacing courses, parapets, coping bedblocks, anchorblocks, plain window cills, fillets etc. including cost of all materials, labour, HOM of machinery, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
1770
-
10239450
Providing and laying in position REINFORCED cement concrete of mix M25 with OPC cement @340Kgs using 20mm and down size graded granite metal coarse aggregate @ 0.70Cum and fine aggregate @ 0.47cum with super plastisiser @ 3Ltrs confirming to IS 9103-1999 reaffirmed-2008 using 20mm and down size graded granite metal, concrete laid in layers not exceeding 15 cms. thick, well vibrated for all works in foundation and plinth and ground floor level for Roof Slab,Staircases, lintels, Retaining walls, Return walls, including attached palsters, columns piers, abutments, pillars, posts, studs, butresses, strings or lacing courses, parapets, coping bedblocks, anchorblocks, plain window cills, fillets etc. including cost of all materials, labour, HOM of machinery, curing complete as per specifications. GROUND FLOOR
1135.44
-
6833077.92
Providing and laying in position REINFORCED cement concrete of mix M25 with OPC cement @340Kgs using 20mm and down size graded granite metal coarse aggregate @ 0.70Cum and fine aggregate @ 0.47cum with super plastisiser @ 3Ltrs confirming to IS 9103-1999 reaffirmed-2008 using 20mm and down size graded granite metal, concrete laid in layers not exceeding 15 cms. thick, well vibrated for all works in foundation and plinth and ground floor level for Roof Slab,Staircases, lintels, Retaining walls, Return walls, including attached palsters, columns piers, abutments, pillars, posts, studs, butresses, strings or lacing courses, parapets, coping bedblocks, anchorblocks, plain window cills, fillets etc. including cost of all materials, labour, HOM of machinery, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. FIRST FLOOR
42.67
-
259348.26
Providing TMT steel FE 500 reinforcements for RCC work including straightening, cutting, bending, placing in position lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps and hooks shall not be measured and paid) cost of all materials labour, HOM of machinery complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
244.01
-
17427438.21
Providing TMT steel Fe-500 reinforcements for RCC work including straightening, cutting, bending, placing in position lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps and hooks shall not be measured and paid) cost of all materials labour, HOM of machinery complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. First Floor
4.4
-
317543.6
Providing and constructing burnt brick masonry for basement and superstructure with approved quality of non-modular bricks of standard size of class designation 35 with cement mortar 1:6 including cost of materials, labour charges, scaffolding, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. Ground floor.
1604.66
-
9420958.86
Providing and constructing burnt brick masonry for basement and superstructure with approved quality of non-modular bricks of standard size of class designation 35 with cement mortar 1:6 including cost of materials, labour charges, scaffolding, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. First Floor
268.01
-
1589567.31
Construction of partition wall 10 cms thick with ground moulded modular burnt bricks of class designation 3.5 Newton per sqmm with cement mortar 1:4 including providing and fixing plaster mesh manufactured out of hot dipped gelvanised iron of nominal thickness 0.35 mm. 100 mm. wide as per I.S. 2212/1991 at 7.5 m. c to c including cost of materials, labour charges, scaffolding, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
108.2
-
75523.6
Providing and constructing precast concrete solid blocks with compressive strength not less than 5 Newton per Sqmm with cement mortar 1:4 masonry (quoin, Jamb, closer blocks ) with solid concrete blocks of size 40x20x20cms conforming to I.S: 2185/1965 in superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
351.54
-
318143.7
Providing and removing centering, shuttering,strutting, propping etc., and removel of form work for foundations, footings, bases of columns for mass concrete including cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
4270.92
-
1118981.04
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for vertical surface such as walls at any thickness, including attached pilasters, buttresses, plinth and string courses cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
94.94
-
34178.4
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
4826.55
-
1409352.6
Providing and removing centering, shuttering, strutting, propping etc., for edges of slabs and breaks in floor including cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
230.51
-
185099.53
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1 m in depth including cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. FIRST FLOOR
119.24
-
35414.28
Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, piers, abutments, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
4416.79
-
2014056.24
Providing and removing centering, shuttering, strutting, propping etc., for columns, pillars, piers, abutments, post and struts, square / rectangular / polygon in plan including cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. FIRST FLOOR
407.93
-
188055.73
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs. complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
3421.73
-
1389222.38
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all materials, labour complete as per specificaitons for heights more than 3.50m from ground level. - 0 to 5 mtrs. complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. FIRST FLOOR
13.44
-
5456.64
providing and removing centering, shuttering, strutting, propping etc., and removal of form work for Stairs (excluding landing) except spiral staircase including cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1359.07
-
743411.29
Providing and laying in position reinforced cement concrete of design Mix M20 with OPC @ 24kgs, with 12mm and down size graded granite metal coarse aggregates @0.05175cum and fine aggregtes @ 0.0345cum, with superplastisiser @0.225lts, machine mixed, well compacted for plain chajja of 7.5 cms. average thickness, upto ground floor level, including cost of all materials, labour, HOM finishing, curing, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
61.04
-
26735.52
Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for chajja, corbels etc., including edges including cost of all materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
102.13
-
33498.64
Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. INSIDE WALLS Plastering
9525.33
-
2419433.82
Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. including lime rendering -Inside Plaster
623.74
-
178389.64
Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. INSIDE WALLS Plastering including lime rendering FIRST FLOOR
114.21
-
29694.6
Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
8134.92
-
2066269.68
Providing 18mm thick cement plaster in single coat with cement mortar 1:4 to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. FIRST FLOOR
2544.08
-
676725.28
Providing 18mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. First floor.
42.26
-
12339.92
Providing 12mm thick cement plaster in single coat with cement mortar 1 :3, to ceiling including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
3227.5
-
742325
Providing 12mm thick cement plaster in single coat with cement mortar 1 :3, to ceiling including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. FIRST FLOOR
35.67
-
8418.12
Providing 12mm thick cement plaster in single coat with cement mortar 1 :3, to ceiling including rounding off corners wherever required smooth rendering, Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. including lime rendering -Ground Floor
516.11
-
135220.82
Providing 12mm thick cement plaster in single coat with cement mortar 1:3, to ceiling including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curingcomplete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. First floor.
13.44
-
3601.92
Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry & concrete surface including rounding off corners wherever required smooth rendering, including providing and removing scaffolding, cost of materials, labour, curing etc., complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1399.86
-
366763.32
Providing ruled pointing 20 mm deep to coursed stone masonry with cement mortar 1:3 after raking joints to depth of 20mm nicely lining, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
175.49
-
24744.09
Providing rough cement plastering 15mm thick in single coat with cement mortar 1:4, to brick masonry for base of dadooing works with sand of approved quality, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
572.25
-
113877.75
Providing lath plaster with cement mortar 1:3, 5cms thick with 6mm dia mild steel bars at 20 cms. c to c both horizontally and vertically fixing chicken mesh for drop chajja, facia, backing to cup boards including cost of all materials, labour, providing and removing form work HOM of machineries, curing, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
185.07
-
195618.99
Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories, painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM of machinery complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
837.36
-
2182997.52
Providing and fixing top covers made out of 20 guage M.S. sheet overm pull and push rolling shutters bent to shape including cost of red lead primer coat of painting , materials, labour, HOM of machinery complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
348
-
167736
Providing and fixing M.S.grill work for windows and ventilators using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
3004.1
-
285389.5
Providing and fixing in position aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer 40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections including cutting to required length, joints mitred subdividing the frame tenonned and rivetted, in the assembled frame, stiffened with end clips for corners, angles etc., and fixed to the walls, lintels, floor beams/cills as the case may be, with necessary steel screws, raul plugs or teak wood gatties including cutting masonry or concrete and making good the original surface using cement mortar. using aluminium section powdered coated to a minimum of 60-70 microns with exterior durable pure polyester grade powder of approved quality. complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
27.72
-
123991.56
Providing and fixing in position anodized aluminium windows and ventilators as per approved drawings with sliding shutters using three track window frame of size 92x31.75mm bottom section 1.3mm thick, weight 1.07kg/m; sides and top sections 1.3 mm, thick, weight 0.933 kg/m.shutter frame section comprising top and bottom section of size 40mmx18mm, wall thickness 1.25mm. weight 0.417 kg./m. shutter side outer40mmx18mm. wall thickness 1.25mm. weight 0.417 kg/m, shutter interlock section 40mmx26.7mm wall thickness 1.1 mm. thick, weight 0.469 kg/m, the shutters mounted on nylon rollers with approved quality of fixtures such as aluminium handles tower bolts etc.; providing and fixing 5.5mm. thick plain glass for shutters fitted with rubber beading all aluminium sections anodised 12 to 15 microns thick including cutting to required length, joints mitred complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
66.39
-
288862.89
Providing, fabricating, assembling and fixing in position anodized aluminium doors using following aluminium mat finish or glossy finish, outer frame plain section 101.6x44.45mm thickness 3.18mm, section weight 2.404 kg/m, door shutters vertical section 44.62x44.45mm thickness 3.18mm, section weight 1.505kg/m, top section 47.62x44.45mm thickness 3.00mm, section weight 1.426kg/m bottom section 114.3x44.45 thickness 3.18mm, section weight 2.646kg/m, door central section 49.91x44.45mm thickness 3.00mm, section weight 1.495 kg/m glazing clips 19x17.3x11mm thickness 0.9mm section weight 0.124kg/m; aluminium sections anodized 12 to 15 microns cut to length joint metred corners grinded, the shutters pivoted opening arrangement with heavy duty aluminium alloy automatic door closures floor mounted, providing and fixing standard approved accessories, such as aluminium handle for full width or length, tower bolts, lock, pivots: P.V.C. or rubber gasket with 5.5m. thick plain glass for top and bottom panel; aluminium sections treated for removal of any rust and prevention of further rust formation, and coated with greasy materials for non-adherance of mortars or any other sticky materials; the assembled frame fitted with the corner angles, strips and fitted with screws, rawl plugs or teakwood gutties to R.C.C. columns or masonry on sides. beams and flooring in bottom. including cutting, chistling and making good with cement mortar to match the surface; all the frames throughly cleaned free from rust, scale, or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2.58
-
15817.98
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1.07
-
67870.1
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors, styles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
4.39
-
17309.77
Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves ( excluding cost of cement concrete and side clamps), but including cost of materials, labour, HOM of machineries complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
0.5
-
47503
Providing and fixing in position fully panelled Honne wood shutters for doors, styles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and styles 100mm wide as per drawing and panels of 25mm thick including cost of materials, labour, HOM of machineries complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
9.99
-
49979.97
Providing and fixing factory made splendoor of solid core single leaf rigid composite polymer laminated sal wood, door shutter of required thickness, manufactured out of solid core door conforming to IS 2202 (Part-1) 1991, laminated with 0.8 mm thick polymer, termite, water resistant and fire retardant with superior gluing based on vacuum lamination technology and with various pre moulded design on both faces conforming to IS 6307-1985, using adhesive conforming to IS 4835-1979 and door shuters tested in conformation to IS 4020-1994. The finish of shutters will be TEAK/OAK/CEDAR/ROSE WOOD/WALNUT, plain colurs WHITE/IVORY/BEIGE/LIGHT GREY. Excluding cost of fixtures and inclusive of supply of shutters to respective work spot. with door shutter 35mm thick.complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
3.78
-
14364
Fixing of door frame in an existing opening including embeeding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1 :3:6 of 20mm and down size granite metal painting two coats of coal tar to sides of frame, making good the damages to walls and floor as required and disposal of the debries with lead upto 50 m. including cost of materials, labour charges, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
5
-
6830
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for styles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form styles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Panelling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the styles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm. Aluminium hinges. with both side prelam complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
32.03
-
119984.38
Providing and fixing Vitrified glazed tiles of approved make, quality & colour of size 600 x 600 x 10mm thick fixed on bed of 12mm thick cement mortar for flooring, skirting and jointed with neat cement slurry mixed with pigment to mach shade of tiles, including providing spacers at required interval and removing stains, including cost of all mateirals, mortar, labour, etc., complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
177.9
-
159042.6
Providing and fixing Special make glazed Vitrified tiles (Granomite finish) of approved make, quality and colour of size 600x600x10mm thick fixed on bed 12mm thick cement motor for flooring, and skirting jointed with neat cement slurry mixed with pigment to mach shade of tiles including providing spacers at required interval and removing stains including cost of all metarials mortor labour etc, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. Ground Floor
309.74
-
340404.26
Flooring with 25mm to 40mm thick polished shahabad slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2137.73
-
2926552.37
Providing and fixing 1mm thick M.S. sheet sliding shutters with frame and diagonal braces of 40x40x6 mm angle Iron 3.15mm thick M.S. Gusset plates at junctions and corners, 25mm dia pulley, 40x40x6 mm angles and T iron guide rail top and bottom respectively with handles, stoppers and locking arrangements etc., including applying a priming coat of red lead paint cost of materials, labour, HOM of machinery complete as per specifications. 1 double leaf door of size 2.4x2.4m complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
5.67
-
18030.6
Providing and fixing 1mm thick M.S. sheet garage door with frame and diagonal braces of size 40x40x6 mm angle Iron, 3.15mm thick M.S. Gusset plates at the junctions and corners, with handles, stoppers and locking arrangements etc., including applying a priming coat of red lead paint cost of materials, labour, HOM of machinery Double leaf doorcomplete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
16.8
-
45847.2
Providing and fixing 65mmx90mm GRP Doorframe fabricated using E-Glass Chopped Strand Mat (CSM) U.V- stabilized Isopthalic Gelcoat and Isopthalic resin. The thickness of the GRP skin shall not be less than 2.0mm. The doorframe consists of four segments, which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screws. The GRP frame shall be provided with wooden reinforcement on 6 locations for high screw holding capacity for fixing metalling hold fast and shall be consolidated by filling with medium density foam/Plaster of Paris with fibre reinforcement. Six Numbers of 260mmx25mmx5mm size 'S' shaped M.S. flat hold fast shall be provided with the frame complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
68.4
-
30780
SOLID PANEL PVC DOOR SHUTTER: Providing and fixing in position 30MM THICK factory made rigid foam panelled door shutters made from MS tube of 19 gauge thickness, size 19x19mm for styles and 15x15mm for top and bottom rails, covered with heat moulded PVC C channel of 5mm th. sheet and 30x50mm wide to form styles and 5mm thick and 75mm wide PVC sheets for top rail, lock rail and bottom rail on either side and 5mmm thick 20mm wide PVC sheet as gap insert for top rail and bottom rail, panelling of 5mm thick PVC sheet fitted in MS frame sealed in to styles and rails with 5x30mm PVC sheet beading on either side and joined together with solvent cement adhesives etc complete fixed to frame with 3 nos of 75mm alluminium hinges including cost of materials, labour, HOM of machineries complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
15.75
-
43737.75
Providing and fixing in position collapsible steel shutters with single or double leaf with vertical channel 20mmx10mmx2mm braced with flat iron diagonals 20mmx5mm size, with top and bottom rails of T iron sections of 40x40x6 mm with 38mm dia steel pulleys complete with bolt and nuts, locking arrangements, stoppers, handles on both sides with 7.5cms openings at 10 cms. c to c applying a priming coat of red lead paint. cost of materials, labour, HOM of machinery complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
5.76
-
30009.6
Providing Ceramic tiles of approved make,shade and size for flooring, treads of steps and landings laid on a bed of 12mm thick, cement mortar 1 :3 mix, flush pointing with white , cement using colour pigment, including cost of materials, labour, curing, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. 30x30x6mm thick
100.58
-
121198.9
Providing skirting, dado, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface (excluding cost of rough plastered surface which should be measured and paid separately ) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. color glazed tiles 30x45cms size with border of 30x10 cms
750.25
-
952817.5
Providing and fixing of wall cladding using 20mm thick gang saw water cut Shiva gold granite, grey granite in CM 1:3 proportion cut to required shape, pattern with paper joints, finished with cement mortal using white cement and colour pigments to match the colour of slab making through jointing with sealant, making holes 25mmx12mm grooves in joints including cost of all materials, mortar, labour, curing etc., complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
53.85
-
190359.75
Providing and laying Hassan Green granite flooring for staircase, treads and rises using pre polished 20 mm thick water cut green Granite slab laid over existing cement concrete bed in CM 1:3, average 20mm thick including full rounding for nosing , cutting 3 line grooves not more than 2 mm wide for antiskidding, curing etc.,complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. GROUND FLOOR
56.33
-
250330.52
Fabrication supplying and erecting M.S.tubular trusses of all spans with prefabricated steel applications using quality material and are durable,reliable and corrosion and abrasion resistant. Welding shall confirm to latest structural welding code. Quality shall be on various parameters like shape, size, design gauge and polish. The entire trusses is anchored in RCC column byusing 4 Nos of M.S.anchor bolts at each support with 10 mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S.Pipes and welding wherever necessary and applying one coat of redoxide primer coat to all the members including cost of all materials, labour charges and hire charges of machineries for cutting,welding,grinding and erection equipments, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
10097.29
-
1120799.19
Fabrication supplying and erecting M.S,angular Trusses of span upto 10m. The bottom and top member is provided with 50x50x6mm double equal angles. welded back to back and in between top and bottom line, in areas of mid section is provided with 50x50x6mm equal angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plaste as per Drawing No.CBS/SD/K.Mantap/p/MND/97. The entire trusses is anchored in RCC column bu using 4 Nos of M.S.anchor bolts at each support with 10 mm thick base plate and shoe plate. The work includes cutting, straightening, placing in position of M.S.Pipes and welding wherever necessary and applying one coat of redoxide primer coat to all the members including cost of all materials, labour charges and hire charges of machineries for cutting,welding,grinding and erection equipments, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
27100
-
3468800
Providing and installing of pre painted Galvalume Iron Trapezoidal Profiled sheet of approved make 1060 mm width (1000 mm cover width) 28-30 mm crest height with crest distance 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm + or - 0.02 mm tolerance Zinc-alu Alloy coating AZ 150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 micron epoxy primer on both side of the sheet and polyester top coat 20-22 mm microns using self drilling / self tapping screws of 25 mm length to be fixed over the existing purlins, rafters, channels and trusses complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1616.58
-
1112207.04
Providing and installing of approved make pre painted Galvalume Iron Accessories like plin ridges, plain gutter, plain flashing , corner Trim, etc, The total coated thickness (TCT) of the sheet shall be 0.47mm+/-0.02 tolerane mm Zinc-Alu Alloy coating AZ 150 gsm as per ASTM 1397/755-550 mpa steel grade, 5-7 micron epoxy primer on both side of the sheet and polyester top coat 20-22 mm microns using self drilling / self tapping screws of 25 mm length (width upto 500-600 mm only) to be fixed over the existing purlins, rafters, channels and trusses complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
400
-
264000
Providing and fixing M.S.Gate as per Chief Architect Drawing,using 50mmx50mm 14 gauge M.S hollow pipe frame work bent to ornamental shape as shown in the drawing and 35mmx6mm and 16 x16 mm squard rods for verticals alternatively spaced at 4 cms c/c in two halves and 40mmx6mm M.S.flats for horizontal members and at the top cast iron spikes are provided at alternate vertical members at shown in the drawing etc., complete. All the steel surface should be thoroughly cleaned free of rust and painted with anticorrosive paint(shop paint)etc., complete. The work includes cost of all materials,labour charges for all items of work,hire charges for welding,cutting and grinding equipment and electricity charges with lead and lift, loading and unloading charges etc.,complete as per specification complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
44.94
-
135359.28
KSRB 7.19 Providing and fixing of Aluminium composite panel of approved make and colour for wall cladding for curved Brick/Rcc/stone walls & coloumns/beams with necessary aluminium frame works at required level made out of 50x25x3mm 'C' section or equalent. The panel should consist of 2.5 mm thermoplastic core of antitoxic LDPE sandwiched between 0.25 skins thick aluminium sheet making a total panel thickness of 3mm. The surfaces will be finished with PVDF based coating on topsides and service coating on reverse sides would be in polyester paint. The system shall be fixed using GI brackets, aluminium L cleats and stainless steel bolts and nuts complete with spring washer and cap nuts and all other necessary accessories, sealing shall be done using weather sealant of Dow Corning 789 with necessary rods etc., complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
107.64
-
473616
Providing applying two coats of wall putty to inside plastered walls and ceiling using white cement putty. Scrapping and levelling the surface using steel blade and preparing the surface even and smooth by using different grade sand papers, including cost of all materials, cost of labour and scaffolding etc., complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
7119.74
-
555339.72
Providing and applying painting in two coats with plastic emulsion paint of approved brand on wall surface with one coat of primer to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
9182.14
-
826392.6
Providing and finishing external walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
5453.16
-
981568.8
Providing and finishing external walls in two coats over one coat of primer with antifungal paint of approved brand and shade to give an even shade after thoroughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1944.32
-
357754.88
Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter,including cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2560.12
-
243211.4
Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2888
-
257032
Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
4849.19
-
533410.9
Providing and applying two coats with oil bound washable distemper of approved brand and shade on wall surface including priming coat with distemper primer after throughly brooming the surface'free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
350.64
-
40323.6
Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. with primer.Ground Floor
1068.44
-
108980.88
Providing and finishing external walls in two coats with waterproof cement paint of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour,complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. with primer. FIRST FLOOR
599.76
-
63574.56
Applying priming coat over new wood surface and / or wood based surface with white lead paint priming including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting ready mix paint including cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
25.97
-
1194.62
Providing and applying painting two coats ( excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
17.55
-
1702.35
Providing and laying in position plain cement concrete of mix M20 with OPC cement @300Kgs, with 20mm and down size graded granite metal coarse aggregate @ 0.64Cum and fine aggregate @ 0.43Cum with superplastiser @3ltrs confirming to IS 9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation ,plinth and cills, including cost of all materials, labour, HOM of machinery, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
286.83
-
1563223.5
Providing and fixing 304-grade Stainless steel hand rails of 14-gauge pipe for Ramps or staircase are made out of stainless steel hollow pipes,using 50mm dia for verticals @ 1.60 mtr c/c are fixed to the ramps or steps by drilling with bolts and 100mm dia M.S.base plated 10mm gauge for fixing of vertical pipe 4-Nos anchor bolts & 40mm dia pipes are fixed horizontally for 2-rows top, one pipes ared fixed with vertical pipes another one are fixed with elbow and 25mm dia pipes ard fixed horizontally for 2-rows below top measure @ equal intervals including cutting,welding,bending wherever necessary with suitable caps@ tops, bottom & corners finishing with mat/shining etc. complete including cost and conveyance of all materials,labour for all items of work,HOM of equipment with all lead and lift, loading and unloading, transportation charges and all other incidental charges etc.,complete as per specificatin and direction of the Engineer-In-Charge of the work. Ramps or Staircase for physically challenged.
29.07
-
156338.46
Earthwork excavation ( in deposited soil ) and filling sides of foundation upto plinth in layers not exceeding 20 cms. in depth, compacting each deposited layer by ramming after watering including cost of all labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
13234.15
-
5333362.45
Providing and laying in position plain cement concrete of mix M20 with OPC cement @300Kgs using 20mm and down size graded granite metal coarse aggregate @ 0.69Cum and fine aggregate @ 0.43cum with super plastisiser @ 3Ltrs confirming to IS 9103-1999 reaffirmed-2008 machine mixed , concrete laid in layers not exceeding 15cm thick, well compacted , in foundation,plinth and cills , including cost of all materials, labour, HOM of machinery, curing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
501.43
-
2655071.85
Vaccum Dewatering levelling and compaction of the laid concrete by the machine surface vibrater dewatering with pre mix vaccum dewatering pump p-4001 and section mark RM-60 bleating and further compaction with skim floorer G-1003 with flooring disk and finally the surface finished with power trowelling for increased wear resistance with remix skim floarer G-1003 including firm wash etc., complete with all leads and lift and as directed by the engineer in charge of the work.
1259.68
-
85658.24
Providing groove cutting for width of 5 mm to 10 mm and depth 80mm-100mm including cost of cutting machine, generator and HOM of machinery, including cost of blade,coolant etc., including cleaning of groove and providing sand and hot bitumen fillars and filler metal etc., including cost of conveyance of materials, labour, lead and lift charges and all other incidental charges as per drawing and as per specification and as directed by the engineer in charge of the work.
190
-
25650
Providing and fixing on wall surface 4.0 kg / sq.cm H.D.P.E. rain down water pipes 110mm outer dia. approved make and brand with necessary specials like shoes, bends and offsets fixed with iron clamps, wall plugs, screws, including cost of materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
869
-
444928
Providing and fixing Chorinated Poly Venyl Chloride(CPVC) Pipes conforming to IS 15778, having thermal stability for hot and cold water supply including CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing. This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (external work ) 20mm dia
980
-
143080
Providing and fixing Chorinated Poly Venyl Chloride(CPVC) Pipes conforming to IS 15778, having thermal stability for hot and cold water supply including CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing. This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (external work ) 25mm dia
75
-
13425
Providing and fixing Chorinated Poly Venyl Chloride(CPVC) Pipes conforming to IS 15778, having thermal stability for hot and cold water supply including CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing. This includes jointing of pipes and fittings with one step solvent cement, trenching, refilling and testing of joints complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (external work ) 32mm dia
30
-
6780
Providing and fixing Chorinated Poly Venyl Chloride(CPVC) Pipes conforming to IS 15778, having thermal stability for hot and cold water supply including CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of jointscomplete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (concealed work including cutting chases and good the walls etc., ) 20mm Dia
80
-
18800
Providing and fixing Chorinated Poly Venyl Chloride(CPVC) Pipes conforming to IS 15778, having thermal stability for hot and cold water supply including CPVC plain and brass threaded fittings including fixing the pipe with clamp at 1.00mtr spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (concealed work including cutting chases and good the walls etc., ) 25mm dia
95
-
27835
Providing and fixing in position brass bib cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
25
-
4325
Providing and fixing in position brass stop cock of approved quality 20mm nominal bore including cost of all materials, labour and HOM of equipments complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
25
-
3525
Providing and fixing in position brass stop cock of approved quality 25 mm nominal bore including cost of all materials, labour and HOM of equipments complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2
-
278
Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end) 25mm nominal bore including cost of all materials, labour and HOM of equipments complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
8
-
3592
Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end) 32mm nominal bore including cost of all materials, labour and HOM of equipments complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1
-
830
Providing and fixing unplasticised PVC connection pipe with brass union 15mm nominal bore 450mm length of PVC connection including cost of all materials, labour and Hom of equipments complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
3
-
792
Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 25mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
20
-
2580
Providing and fixing to wall, ceiling and floor, medium density polyethylene pipes 6.00 kgf/sq.cm working pressure 32mm outside diameter with special flange, compression type fittings, wall clips, making good the wall, ceiling and floor, including cost of all materials, labour charges, HOM of equipments and testing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
20
-
3800
Providing and fixing white vitreous china clay, water closet European type ( Pedestal type) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre white glazed / vitreous china clay low level, flushing cistern (all are approved make) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with specials and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
11
-
52877
Providing and placing on terrace, polyethylene water storage tanks with manhole lid and suitable locking arrangements, 'making holes of suitable diameter for inlet, outlet and over flow pipes, including cost of all materials, labour, transport charges, HOM of equipments and testing complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (For 1000 litre capacity) Specification NO.KBS 13.22
2
-
13656
Providing and fixing white vitreous china clay, flat back wash basin size 550x400mm with a pair of 15mm C.P brass pillar taps with C.I / M.S brackets, 32 mm C.P. brass waste of standard pattern, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
11
-
42669
Providing and fixing white vitreous china clay, flat back, lipped front urinal basin of 430x260x350mm with 5 litres PVC automatic flushing cistern, C.I / M.S brackets, standard flush pipe and C.P. brass spreaders with brass unions and G./. clamps complete. painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
10
-
30720
Providing and fixing 450mm dia Circular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
9
-
7452
Providing and fixing C.P. brass towel rail 600 mm length, 20mm dia with C.P brackets, fixed to wooden cleats with C.P. brass screws including cost of materials, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
8
-
5392
Providing and fixing stoneware gully trap of approved quality and fixing in CC 1:2:4 including cost of materials, conveyance, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. 15cmx10cm
17
-
4760
Providing and fixing CI nahani trap of approved quality and make confirming to IS specifications and construction of cistern in CC 1:2:4 including cost of materials, conveyance, labour complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
21
-
5985
Constructing Brick Masonry Inspection Chambers 450x450mm x450mm Depth( Clear inside Dimensions) for Single Pipe Line using Table moulded non modulor bricks of CLass designation 50 in CM 1:5 CR Cover With frame (Light Duty) 450x450mm internal dimensions total wt of cover with frame not less than 38 KGs ( Wt of Cover 33 kgs and Wt of Frame 15Kg) RCC top slab with CC 1:2:4 Mix using 200mm and down size granite metal, Foundation Concrete 1:5:10 with 40mm and down size granite metal, inside plastering 12mm th, with CM 1:3 finished smooth with a floating coat of Cement on walls and bed concrete complete as per standard design , including cost of all materials, labour charges,complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
4
-
21200
Constructing Brick Masonry Inspection Chambers 600x600mm x450mm Depth( Clear inside Dimensions) for Single Pipe Line using Table moulded non modulor bricks of CLass designation 50 in CM 1:5 CR Cover With frame (Light Duty) 600x600mm internal dimensions total wt of cover with frame not less than 38 KGs ( Wt of Cover 33 kgs and Wt of Frame 15Kg) RCC top slab with CC 1:2:4 Mix using 200mm and down size granite metal, Foundation Concrete 1:5:10 with 40mm and down size granite metal, inside plastering 12mm th, with CM 1:3 finished smooth with a floating coat of Cement on walls and bed concrete complete as per standard design , including cost of all materials, labour charges, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2
-
14056
KSRB12-8.2:Constructing Brick Masonry Inspection Chambers 600x600mm x450mm Depth( Clear inside Dimensions) for Single Pipe Line using Table moulded non modulor bricks of CLass designation 50 in CM 1:5 CR Cover With frame (Light Duty) 600x600mm internal dimensions total wt of cover with frame not less than 38 KGs ( Wt of Cover 33 kgs and Wt of Frame 15Kg) RCC top slab with CC 1:2:4 Mix using 200mm and down size granite metal, Foundation Concrete 1:5:10 with 40mm and down size granite metal, inside plastering 12mm th, with CM 1:3 finished smooth with a floating coat of Cement on walls and bed concrete complete as per standard design , including cost of all materials, labour charges, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
12
-
101880
Providing & fixing C.I manhole cover with frame 610x455mm size (38 Kgs) including cost of all materials, labour charges, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
4
-
8474.56
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom1.67m deep and 0.56m dia at top, with table moulded non modular bricks of class designation 50 in cement mortar 1:4, inside cement plaster 12mm thick with cement mortar 1:3, finish with a floating coat of neat cement, foundation concrete M10 using 40mm and downsize granite metal and making necessary channel in cement concrete M15 with 20mm and downsize granite metal, finished with a floating coat of neat cement, with S.F.R.C. cover and frame ( heavy duty, HD-20 grade designation) 560mm internal diameter confirming IS : 12592, total weight of cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4 20mm and downsize broken granite metal, providing and removing entering, shuttering including cost of materials, labour charges, HOM of mechineries complete as per specifications. ( Excavation, footrests and 12mm thick cement plaster on the external surface shall be paid seperately) complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1
-
24102
Providing and laying heavy duty cobble stones interlock pavers, 75mm thick using cement and course sand for manufacture of blocks of approved size, shape and colour with a minimum compressive strength of 281 kg per sqm over 50mm thick sand bed (average thickness) and compacting with plate vibrator having 3 tons compaction force thereby forcing part of sand underneath to come up in between joints, final compaction of paver surface joints into its final level, including cost of materials, labour and HOM complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2867
-
3139365
Providing and laying in position to required levels and slopes for 200mm internal diameter salt glazed stoneware pipes grade A, and joining with stiff mixture of cement mortor in proportion of 1:1, testing of pipes and jointsincluding cost of materials, labour charges, HOM of machinery, curing ccomplete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
60
-
29100
Providing and fixing CUBICLE WORK STATIONS consisting of wings made out of 75mm thick MS CRCA powder coated,tile based system for main and return spine. Top tile finish 8mm thick MDF covered with fabric of approved colour and one writing board (600mm W) and one soft board (600mm W) per work station. Bottom tile finish 9mm thick Laminate tile of approved colour, Raceway- one middle raceway (600mm W) below table top per work station and continuous raceway at the skirting level, wire manager- ABS plastic grommet one number per table. Table top 25mm thick PLPB with straight table top end table 25mm thick PLPB with straight edge bound. Hardware - MS powder coated coner bracket, Cantelever bracket, separator hook on bracket, L bkt, and table joint plate, with all lead and lift transportation etc., complete as per specification drawings and as directed by the Engineer incharge - X TYPE 4 WING SIZE- 1500mm WX 1500mmDX1200mm Ht
15
-
930000
Earth work excavation for foundation and removing the excavated stuff to to a distance complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
237.66
-
106709.34
Providing and laying in position plain cement concrete of mix 1:3:6 with OPC cement @ 220kgs, with 40mm and down size graded granite metal coarse aggregates @0.892cum and fine aggregates @ 0.465cum machine mixed, machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation including cost of all materials, labour, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
18.12
-
93154.92
Providing and laying vibrated M25 design mix for RCC work (Excluding cost of reinforcement) with 20 mm and down size of approved gradation hard broken granite, trap. basalt or any other approved hard aggregate including cost and conveyance of all materials with all lead & lift including weigh batch plant mixing plywood/steel fom1 work, centering, scaffolding, curing, plastering and smooth finishing the exposed faces in C.M. I :3 12 mm thick as per designs eic. complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. for RCC Shaft (minimum Cement@ 360Kgs).
19.8
-
293891.4
PProviding and laying vibrated M30 design mix for RCC work (Excluding cost of reinforcement) with 20 mm and down size of approved gradation hard, broken gr.initc, trap, basal! or any other approved hard aggregate with plastering and smooth finishing the exposed faces in C.M. I :3 12mm thick including cost and conveyance of all materials with all lead & lifts. including weigh batch plant mixing, plywood/steel fonn work, centering, scaffolding, curing, as per designs etc., complete for columns, braces and ring beam above ground level (minimum Cement@ 400 Kgs staging columns & braces (all above ground level excluding the cost of reinforcement & fabrication charges). complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
17.53
-
334051.68
Providing and laying vibrated M30 design mix for RCC work (excluding cost of reinforcement) with 20 mm and down size, trap, basalt or any other approved hard aggregate including cost and conveyance of all materials with all lead & lift. plywood/steel fom1 work. centering, scaffolding, plastering and smooth finishing the exposed faces in CM. 1:3 12 mm thick and CM plastering 1:3 proportion 20 mm thick for ins ide with an admixture of water proof compound of requisite proportion or approved quality including weigh batch plant mixing, curing etc .. and reservoir given satisfactory water proof testing as per directions, c1c., complete, for conical shell portion, bottom dome/slab,side wall and ribs over the staging. (Contractor will make his own arrangements for procuring water for testing) (Cement @ 400 Kgs).e for ring beam, side walls, bottom dome or bottom slab, shell portion & bottom ribs (excluding the cost of reinforcement, fabrication charges & jointing materials) complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
54.32
-
1156961.68
Providing and laying vibrated M30 design mix for RCC work (excluding cost of reinforcement) with 20 mm and down size of approved gradation hard broken granite, rrap, basall or any other approved hard aggregate including cost and conveyance of a ll materials with all lead and lifts above staging including weigh batch plant mixing, centering, plywood/steel form work, scaffolding, tamping, curing, cement mortar plastering I :3 proportion 12 mm thick for both inside and outside surface etc., complete, for Top dome/ Slab. (Cement @ 400 Kgs). complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (excluding the cost of steel & fabrication charges).
7.33
-
179504.37
Providing & laying vibrated CC 1:1.5:3 proportion using clean graded granite or trap or basalt jelly of approved quality of 20 mm & down size, in layer of not more than 15 cm thick, well consolidated including centering, framework, machine mixing, vibrating, curing smooth finishing to the required plumb & face in CM 1:3 proportion wherever necessary, etc complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
1.34
-
8090.92
Providing and laying vibrated M25 design mix for RCC works (excluding cost of reinforcement) with 20mm and down size of approved gradation hard broken granite, trap, basalt or with any other approved hard aggregate including weigh batch plant mixing and conveyance of all materials with all lead and lift laid in 15cms thick,layers well consolidated vibrating curing smooth finishing the exposed faces wherever necessary plywood / steel form work, centering etc., complete for independent/combined footing, raft, beams below ground level (minimum Cement @ 360Kgs) exclusive of cost of steel & fabrication charges). complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
3.6
-
23994
Providing and laying vibrated cement concrete I: I� :3 proportion for RCC work for spiral stair case (excluding cost of reinforcements) as per designs using I 0mm and down size of approved gradation hard broken, granite. trap, basalt or any other approved hard aggregate including cost and conveyance of all materials with all lead and lifl, plywood/steel form work, centering, scaffolding and cement mortar plastering I :3 proportion 12 mm thick for all exposed surfaces of stair case including machine mixing, rounding all comers fini shed smooth rendering, curing etc .. complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
3.4
-
116045.4
Providing and laying vibrated cement concrete M-20 proportion for RCC work excluding cost of reinforcement with 10mm to 12mm ISI gauge of approved gradation and broken granite or trap or basalt or any other approved hard jelly including cost and conveyance of all materials including form work, centering, scaffolding, cement motor plastering 1:3 proportion, 20mm thick for inside with admixture of water proof compound of requisite proportion of approved quality including machine mixing, vibrating, curing making construction joint wherever necessary and giving satisfactory water proof testing etc, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (Exclusive of cost of steel & fabrication charges) - do - For flat or sloping floor slab
6.08
-
36366.18
Providing and laying vibrated cement concrete M-20 proportion for RCC work excluding cost of reinforcement with 10mm to 12mm ISI gauge of approved gradation and broken granite or trap or basalt or any other approved hard jelly including cost and conveyance of all materials including form work, centering, scaffolding, cement motor plastering 1:3 proportion, 20mm thick for inside with admixture of water proof compound of requisite proportion of approved quality including machine mixing, vibrating, curing making construction joint wherever necessary and giving satisfactory water proof testing etc, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (Exclusive of cost of steel & fabrication charges) -do- for Vertical side walls
11.04
-
80838.63
Providing and laying M-20 cement concrete using clean graded granite or trap or basalt jelly 20mm and down size for RCC roof slab and canopies for all spans with steel or plank centering and shultering including machine mixing,lifting, laying, vibrating, tamping, Plastering to ceiling 12mm thick in CM 1:3, curing etc., complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (exclusive of cost of steel and fabrication Charges) CC M-20.
4
-
26059.28
Providing TMT Steel Bars Fe 500 reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
15.56
-
1111310.76
Providing & fixing aluminum ladder using 65 mm x 32 mm x 30 mm ‘C’ section channels & 25 mm dia fluted pipes at 25 cm centre ladder fixed at angle 700 to horizontal including all necessary struts to prevent bucking of the ladder including fixing ladder in CC 1:2:4 proportion of size 0.4 x 0.25 x 0.1 M as directed, etc complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
12
-
32868
Providing & constructing RCC hexagonal ventilator final for RCC overhead tanks with CC 1:2:4 proportion using 20 mm & down size granite or trap or basalt jelly with reinforcement using 6 mm dia MS rods four nos for each of the pillars both ways for full width of dome at 12 mm centre to centre with openings of 0.60 x 0.60 M size provided with 25 mm x 25 mm x 5 mm MS frame welded with diamond mesh to its full & depth fully covered with aluminum mosquito mesh finished smooth with CM 1:3 proportion to required shape & size & ornamental finish including two coats of anti corrosive paint for frame & mesh & two coats of cement painting to match the overhead tank, etc complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2
-
8268
Providing & fixing 60 cm x 60 cm MS inspection door with necessary MS frame made out of MS angle of 50 mm x 50 mm x 6 mm & MS shutter of 3 mm thickness with hinges on top & locking arrangements, painting, etc complete, for RCC overhead tanks & GLSR. complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2
-
3636
Providing & fixing enameled gauge plate 3 mm thick, 2.5 M high & 0.23 M wide with plastic float & plastic indicator & flexible nylon wire, painting figures with approved enamel paint, etc complete to the required height. complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2
-
12100
Supplying and laying of CI Flanged pipe true to line/ hoisting of CI flanged pipe confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spot with all lead and lift etc., 150mm dia complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
24
-
94488
Supplying and laying of CI Flanged pipe true to line/ hoisting of CI flanged pipe confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spot complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. 100mm dia
26
-
62374
Supplying and laying of CI Flanged pipe true to line/ hoisting of CI flanged pipe confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spotcomplete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. 80mm dia
52
-
102336
Supplying and fixing CI Puddle flanges confirming to IS 7181-1986 with latest ammendments, in position for RCC walls including hoisting and conveying them to work spotcomplete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. 150mm dia
6
-
29382
Supplying and fixing CI Puddle flanges confirming to IS 7181-1986 with latest ammendments, in position for RCC walls including hoisting and conveying them to work spot complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. 80mm dia
6
-
15882
Supplying and laying of CI Specials Such as Bend Tee, true to line/ hoisting of CI Specials confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spot complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. Duck foot bends -150mm Dia
6
-
3312
Supplying and laying of CI Specials Such as Bend Tee, true to line/ hoisting of CI Specials confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spot complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. Duck foot bends -80mm Dia
4
-
1092
Supplying and laying of CI Specials Such as Bend Tee, true to line/ hoisting of CI Specials confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spot complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. Tees -150mm Dia
6
-
3312
Supplying and laying of CI Specials Such as Bend Tee, true to line/ hoisting of CI Specials confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spot complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. Tees -80mm Dia
2
-
546
Supplying and laying of CI Specials Such as Bend Tee, true to line/ hoisting of CI Specials confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spot complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. Bell Mouth-150mm Dia
2
-
1220
Supplying and laying of CI Specials Such as Bend Tee, true to line/ hoisting of CI Specials confirming to IS 7181-1986 with latest ammendements in position and and aligning to correct plumb including cost of jointing materials conveying to work spot complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. Tees -80mm Dia
2
-
500
Supply and fixing of Casi Steel Double flanged Dual plate check valve Class 150 Confonning to API 594 with latest amendments as deta iled below of following diameters and types and conveying to work site,loading, unloading, stacking etc., complete complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. The rates are inclusive of cost of Bolts and Nuts 150mm Dia
2
-
16448
Supply and fixing of Casi Steel Double flanged Dual plate check valve Class 150 Confonning to API 594 with latest amendments as deta iled below of following diameters and types and conveying to work site,loading, unloading, stacking etc., complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. The rates are inclusive of cost of Bolts and Nuts 80mm Dia
4
-
16612
Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksile, rolling and lowering into trenches, laying true to line and level and perfect linking at joints, testing and commjssiorung, including loading and unloading at both destinations and cuts of pipes wherever necessary including jointing of PVC pipes and specials (excluding cost of specials) with jointing of approved type, with all labour, with all lead & lift including encasing the pipe alround to a depth of not less than 15cms with soft gravel or selected earth available from the excavation etc. complete and giving necessary hydraulic test to the required pressure as per ISS (contractor wi ll make his own arrangements for procuring water for testing 6 Ksc - 75 mm dia complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
100
-
14000
Providing two coats of water proof cement painting of approved colour and shade over one coat of primer including scrnping the surface with wire brushes etc., before removal of scaffolding for new R.C.C. over head tanks and cleaning of paint stains wherever necessary complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
622.37
-
138166.14
Providing & fixing copper lightning arrestor with 5 spikes & 20 mm dia copper tubes of suitable length & aluminum strap of 25 mm x 3 mm including grounding as per KPTCL specifications. The aluminum strap is to be encased in GI conduit of 40 mm dia, 6 mm long pipe suitably jointed by collars with all specials fixed to one of the columns, etc complete. For 9 to 12.0 mtr Staging complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
2
-
32654
Supplying & fixing 40 mm dia G.I. medium duty pipt:s hand railing 3 rows fixed to Per Mtr of 3 rows I :2:4 vihrated R.C.C. post of Si.le I 00 x 150 mm at top and 150 x 150 mm at bottom placed a1 2 Mlr. intervals for a height of 750 mm including curing, painting G.I. pipes with two coats of anticorrosive steel paint over a primer coat complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. (Rate per Mtr. is for 3 rows ofG.I. pipes.)
96.77
-
88157.47
Refilling the basement & pipeline trenches with available earth from trench excavation including conveying, watering & consolidating in layers of 15 cm thick including disposing of the surplus earth complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
76.98
-
7928.94
Providing and laying red oxide Flooring with 40 mm thick with CC 1:2:4 using metal 12.5 mm and top layer of 10mm thick plaster with 1:3 CM mixed with red oxide (using 3.5 kg of red oxide per 50kg of cement)finished with floating coat of neat cement mixed with red oxide.including cost of materials, labour, curing, complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
6.28
-
4144.8
Providing two coats of water proof cement painting of approved colour and shade over one coat of primer including scrnping the surface with wire brushes etc., before removal of scaffolding for new R.C.C. over head tanks and cleaning of paint stains wherever necessary complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
146.48
-
32518.56
Providing and fixing hand rails poles of 65 mm dia made out of Cement Morter and with a minimum reinforcement of 8 mm dia as per (Market Rate) complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
136
-
8840
Geophysical investigation of site for sinking Borewell for supplying drinking water to the Habitation either through hand pump or MWS or PWS by vertical electrical sounding by adopting venner or Schlumbergers method, including reconniaissance survey of geological formation, geophysial investigation of existing ground water in the vicinity, indicating the location of site, recommended depth of 1.0 mtr in consolidated formation for proper seating of casing pipe depth of drilling required to cover full depth of aquifer proposed to be tapped, probable yield and other information required including transportation of instrument and accessories to work site engaging technical personnel and labour required etc complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work.
3
-
5814
Sinking of Borewell of 165 mm dia clear using super fast hudraulic rig of capacity 250 PSIG and above 900 CMF and aove in all strata including over burden up to 20M fixing of casing collar pipe and cap with necessary cuting and threading including transportation of rig and supporting vehicle, crew charges and cost of consumables etc. complete including Yeild testing at final depth with minimum working of compressor for one hour ( excluding cost of Casing pipes and collars ) complete as per specifications with all leads & lifts and as directed by the Engineer incharge of the work. 0 to 50m depth
100
-
32100
Sinking of Borewell of 165 mm dia clear using super fast hudraulic rig of capacity 250 PSIG and above 900 CMF and aove in all strata including over burden up to 20M fixing of casing collar pipe and cap with necessary cuting and threading including transportation of rig and supporting vehicle, crew charges and cost of consumables etc. complete including Yeild testing at final depth with minimum working of compressor for one hour ( excluding cost of Casing pipes and collars ) with all leads and lifts as per the direction of the Engineer in charge of the Work 50 to 100m depth
100
-
42000
Sinking of Borewell of 165 mm dia clear using super fast hudraulic rig of capacity 250 PSIG and above 900 CMF and aove in all strata including over burden up to 20M fixing of casing collar pipe and cap with necessary cuting and threading including transportation of rig and supporting vehicle, crew charges and cost of consumables etc. complete including Yeild testing at final depth with minimum working of compressor for one hour ( excluding cost of Casing pipes and collars ) with all leads and lifts as per the direction of the Engineer in charge of the Work 100 to 150m depth
100
-
46700
Sinking of Borewell of 165 mm dia clear using super fast hudraulic rig of capacity 250 PSIG and above 900 CMF and aove in all strata including over burden up to 20M fixing of casing collar pipe and cap with necessary cuting and threading including transportation of rig and supporting vehicle, crew charges and cost of consumables etc. complete including Yeild testing at final depth with minimum working of compressor for one hour ( excluding cost of Casing pipes and collars ) with all leads and lifts as per the direction of the Engineer in charge of the Work 150 to 200m depth
100
-
49400
Sinking of Borewell of 165 mm dia clear using super fast hudraulic rig of capacity 250 PSIG and above 900 CMF and aove in all strata including over burden up to 20M fixing of casing collar pipe and cap with necessary cuting and threading including transportation of rig and supporting vehicle, crew charges and cost of consumables etc. complete including Yeild testing at final depth with minimum working of compressor for one hour ( excluding cost of Casing pipes and collars ) with all leads and lifts as per the direction of the Engineer in charge of the Work 200 to 250m depth
100
-
57100
Sinking of Borewell of 165 mm dia clear using super fast hudraulic rig of capacity 250 PSIG and above 900 CMF and aove in all strata including over burden up to 20M fixing of casing collar pipe and cap with necessary cuting and threading including transportation of rig and supporting vehicle, crew charges and cost of consumables etc. complete including Yeild testing at final depth with minimum working of compressor for one hour ( excluding cost of Casing pipes and collars ) with all leads and lifts as per the direction of the Engineer in charge of the Work 250 to 300m depth
100
-
61200
Providing casing Pipes 175 mm dia of approved quality and make as per standard I.S. Specifications etc compllete with leads and lifts as per the direction of the Engineer in charge of the Work
100
-
91900
Providing Collars Pipes 175 mm dia of approved quality and make as per standard I.S. Specifications etc complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
8
-
1800
Providing M.S. cap of approved quality and make as per standard I.S. Specifications etc compllete with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
550
Supply and delivery of submercible Pump sets suitabel for bore well of 165mm dia and conforming to IS 8034/1989 specification 10HP/150 Discharge 150 LPM complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
125400
Supply and delivery of brand new best make PVC insulated copper conductor cable of fiat 3 core sheathed of nominal cross sectional area 2.5 sqm conforming to is 694-1977 with latest amendments with ISI mark 1x3x2.5 sqm complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
600
-
54000
Supply and delivery of brand new best make non return valve of size 50mm conforming to IS 778/84 with latest amendments 50mm dia with ISI mark ) complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
8
-
10640
Erection of pumpsets including aligning and balancing with necessary erection materials and labour including supply and erection of a pair of supporting clamps borewell cap, cable clips and water light glands cable protectors bolts and nuts valves and guages etc., it involved in the job. Note: The contractor has to arrange his own erection tools at site his own cost complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
9000
Supplying and delivery at site brand new ISI make control panel unit and the panel board shall be complete with all the required fittings like suitable capacity ammeter, Volatameter, Rotary switch, single phase preventer indicator fuse cutout, relay wiring, suitable for submercible pump of capacity 6HP tp 12.5HP with star delta starter.(P-16, I-6c) complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
12800
Supply and fixing of Electronic meter 10 to 40 Amp 3 Phase class I Accuracy as per approved KPTCL specifications(code no 3570201) complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
9490
Supply and fixing of miniature circuit breakers, isolators on to the existing M.C.B distribution on the existing M.C.B distribution board using necessary fixing materials and wiring complete as required 5 to 30 A tripple pole and neutral. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
3430
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm alround with alterate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
5999.4
Supplying of LT UG cable having aluminium conductor PVC insulated, sheathed, galvanised, steel wire/steel tap armoured cable with PVC outer sheathing 1.1 KV class etc complete. & as per specifications and directions of engineeer in charge of the work. 3.5Core 35 Sq.mm complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
180
-
40500
Digging of trench of 0.6m deep x 0.50 mtr wide refiling the trench to the required ground level and consolidating etc complete. & as per specifications and directions of engineeer in charge of the work. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
160
-
16320
Labour charges for laying of 1.1 KV class UG cable when supplied departmentally / agency in existing trench GI pipe / stoneware pipe / on wall / on pole as required. etc complete. & as per specifications and directions of engineeer in charge of the work. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
180
-
2790
Earth work excavation for foundation of structures upto 3 mtrs. by mechanical means in all types of soils as per drawing and technical specification, including setting out, providing shoring, strutting and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom, filling back the excavated earth to the extent required and utilising / transporting the remaining earth with all leads & lifts including cost of labour, materials and HOM etc., complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1873.26
-
97409.52
Providing and fixing in position brass gate valve with C.I wheel of approved quality ( screwed end ) 50mm nominal bore including cost of all materials, labour and HOM of equipments complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
35
-
60865
Supplying HDPE Conforming to IS 4984:1995 with latest amendments and conveying to work spot including loading and unloading at both dimensions and rolling lowering into trenches, laying true to line laying and jointing of pipes and specials by electrofusion welding as per standard procedure and guidelines selected earth including encasing pipes around to a depth not less than 15cms with soft gravel or selected earth available from the excavation etc. complete giving hydraulic test as per relevant ISS with all lead and lift including testing and commissioning. The rate is exclusive of required specials and fittings etc. Completed (Contractor will make his own arrangement for procuring water for testing up to 90mm dia, PN 10 coils shall be used. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1200
-
289200
Supplying HDPE Conforming to IS 4984:1995 with latest amendments and conveying to work spot including loading and unloading at both dimensions and rolling lowering into trenches, laying true to line laying and jointing of pipes and specials by electrofusion welding as per standard procedure and guidelines selected earth including encasing pipes around to a depth not less than 15cms with soft gravel or selected earth available from the excavation etc. complete giving hydraulic test as per relevant ISS with all lead and lift including testing and commissioning. The rate is exclusive of required specials and fittings etc. Completed (Contractor will make his own arrangement for procuring water for testing up to 75mm dia, PN 6 coils shall be used. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1500
-
279000
CI Sluice valve with cast Iron Body and Seat ring bronze PN 1.0 Confirming to IS 14846 :2000 complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
12
-
102624
KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness above 200 mm including cost of all materials, labour complete as per specificaitons for heights with leads and lifts as per the direction of the Engineer in charge of the Work
16.83
-
7523.01
Erection of Double pole transformers structure including fixing of structural materials, erection of poles etc., complete for mounting of transformers as per approved drawing 25/63/100 kVA. with 9 mtrs. RCC/PSCC (300kG WL) pole. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
7390
RCC Pole - 9 Mtr Long, 150 Kg WL Sq Section. BESCOM SR (I no 1.2/p 1 of 25) complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
111
-
694638
Erection of RCC/PSC poles 9 to 10 mtr long but in a pit of 1.8 mtr depth.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
111
-
83250
PSCC Pole - 8 Mtr Long, 200 Kg WL. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
6
-
18324
Erection of RCC/PCC/PSC poles of 7.5 to 8 mtr long in pit of 1.5 mtr depth. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
6
-
3588
Spiral Earth Electrode. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
9
-
1485
Providing spiral earth electrode type earthing along with pole (without charcoal, salt etc.,).complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
9
-
549
11KV Special 3 Pin Cross Arm - GI.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
11
-
8657
Fixing of V-Shape/Horizontal cross arm including single top support Braces and Insulators fixing.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
11
-
1166
ACSR Rabbit Conductor(6/3.15mm Al +6/3.15mm Steel. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1.35
-
49270.95
Stringing of conductor Rabbit Conductor binding of conductor on each insulator and dead ending on strain or disc/strain insulator by means of clamps.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1.35
-
3873.15
11kV, 5kN Composite/Polymeric Pin Insulator (24mm dia FRP Rod). complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
24
-
4320
Releasing and Replacing of 11KV Pin Insulators. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
24
-
744
11KV, 45kN Polymeric DISC Insulator. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
12
-
1968
Releasing and Replacing of 11KV Dead End Insulators Disc, Strain etc . complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
12
-
444
Guy clamp - GI, Turn Buckle (GI), Anchor rod using 12mm rounds/guy ROD - GI, Guy wire 8 SWG. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
10
-
11400
Fixing of GUY Sets with break insulators making use of 7/3.15 mm (7/10 SWG) galvanised steel wire with turn buckle and anchoring arrangement as per approved drawing.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
10
-
1750
Pole Concreting with CC 1:2:4 (without coping) 9mtrs support (650x500x1700mm).complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
8
-
21968
H - Frame Set for fixing 11kV, 200Amps SB GOS - (For DP Structure for providing NEW GOS for sectionalisation) -complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
10242
Errection of H Frame. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
420
11kV, 200Amps Single Break GOS. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
15598
Fixing of GOS including wiring (11kV SB 200A).complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
1400
9KV 5kA Lightning Arester metal Oxide ceramic type with ground disconnector. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
1572
Fixing of 3 Nos lightning arrestors including wiring complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
156
11kV Horizontal Cross Arms - complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
666
Fixing of V-Shape/Horizontal cross arm including single top support Braces and Insulators fixing. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
212
11kV Class, HG Fuse Unit with Solid Core Insulators. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
1764
Fixing pole Fuse Board. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
190
HT ST Support 50x6mm Flat- GI.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
156
Fixing of HT/LT single top support. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
140
LT 4 Pin Cross Arm - complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
112
-
28224
Fixing of 4 Pin cross arm with insulator and Braces fixing.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
112
-
11872
1.1 kv, LT Aerial Bunched Cable, confirming to IS-14255:1995 XLPE insulation. 3x95+1x70+1x35 Sqmm Street light (Insulated messenger cum Neutral). complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
3.45
-
1612178.1
Stringing of 1.1kV grade aerial bunched 3 core cable of XLPE insulation of size (3x95) (for Phase conductor) + (1x70) (insulated messenger neutral) + (1x16) street light control.. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
3.45
-
77518.05
Three phase distribution box for 6 connection.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 42.1/p no 13 of 25)
102
-
217056
Piercing connector for suitable for 16 sqmm- 95 sqmm AB Cable for service connections. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
408
-
95880
Piercing connector for suitable for 16 sqmm- 95 sqmm AB Cable for street lights connections.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
102
-
16830
Universal hook and Bolts & Nuts.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
112
-
35168
Dead end clamp /Anchor clamp assembly 25 sqmm to 95 sqmm. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
32
-
4320
Suspension clamp assembly 70 to 210 sqmm Bare messenger. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work5)
102
-
32028
Pre - Insulated lugs - CPTAU for 95 sqmm. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
408
-
141984
Pre - Insulated lugs - CPTAU for 16 sqmm.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
102
-
12852
Supply, erection, testing and commissioning of 100 KVA 5Star rated Aluminium/Copper wound Distribution Transformer 11KV/433V with Off Load Tap Switch, Buchholtz relay winding temperature indicator, oil temperature indicator, marshalling box with wiring, oil level indicator with + 5% to -10% Steps of 2.5%, HT and LT Cable Entry Box Type, stacked core with oil as per IS:1180(Part-1):2014 with all standard accessories as per latest IS standard No:2026/1977 and IS:335, technical specification & ESCOM approved. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
410006
LT Distribution Box for 63/100 KVA Transformer with 1 No 160 Amps 25KA 4 Pole MCCB, suitable capacity aluminum bus bar mounted in 15SWG powder coated M.S. Box suitable to mount at Transformer Center complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
32958.2
LT Wiring kit 63/100 KVA as per standard technical specification as per BESCOM. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
8496
Supplying and fixing of PVC Alkathine Tube of 25mm dia as per standard technical specification. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
6
-
2237.4
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed on the top of the earth electrode. The funnel should be enclosed in a CC chamber of 400x400x400mm with a cast iron cover. The earth electrode shall have staggered holes of 12mm dia and the electrode should be covered 150mm all-round with alternate layers of salt and charcoal from the bottom of the CC chamber. The connection from the electrode is to be established through GI strip using GI bolts and nuts. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
6
-
24900
Supplying & running of GI/Copper strips for grounding connection using necessary fixing materials as required. GI Strip 25 x 6 mm.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
20
-
2300
Providing and spreading stone aggregate 40mm nominal size. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
4
-
4844
Providing chain link fencing 50mm size of 8 guage property stretched between rectangular poles and fixed with suitable bolts and nuts, the free end shall be welded of the pole and block pipe at top and bottom as required including cost of all materials, labour, lead and lift as per the directions of the Engineer - in - charge of work including two coats of approved quality paint over one coat of shop paint, including cost of materials, labour, HOM complete as per specification.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
45
-
32175
Providing and fixing M.S Block pipe of 38mm dia of heavy guage of 14 including removing the bends, cutting the pipe, and fixing pipe in between the existing two verticle poles (M.S rectangular poles) and spot welding the chain link with M.S block pipe including cost of all materials wastage in cutting, and scaffolding wherever necessary with all lead and lifts as directed by the Engineer-in-charge of work etc., complete including two coats of approved quality paint over one coat of shop paint, including cost of materials, labour, HOM complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
60
-
24480
Supplying and fixing M.S Rectangular poles made out of 2 equal angles of 65x65x6mm welded together and fixed in CC (1:2:4) with 2 Nos. 16mm dia M.S hold fast rods each of length 25cms. Including cost of all materials cutting, bending scaffolding wherever necessary, nicely finishing the welded joints with all leads lifts and as per the directions of the Enginner-in-charge of the work and including providing 2 coats of approved quality paint over one coat of shop painting (excluding cost of earthwork and concrete) including cost of materials, labour, HOM complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
25.2
-
24796.8
Supply of 90 Watts LED streetlight with pressure die cast aluminum housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with high transmission indes delivering superior light output . Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70% CCT>5500K, IP 66 optical and electrical compartment & impact rsistance of complete luminare>IK08. power Factor>0.9 with mains current should not be greater than 0.1A to 0.7A & Surge Protection-Min 4KV along with over voltage /Overload, short circuit/miswiring protection. Compatible for pole mounting with outer dia of 40 mm to 50 mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60 Hz application. Over load & short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL aproved MCPCB Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools . LED Light fixture with...65..W System power consumption. LED Efficiency>130lm/w at 1W & Fixture Efficiency>80lm with nominal CRI>75. Luminaire manufacturer should have in house facility accredited by NABL/CPRI & any Government ISO 9001:2008. Housing with supplier word mark/name shall be Engraved/Embossing on the die cast housing/Body part. Warrantly of 2 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED source manufacture & Cree/Nichia/Lumileds/Osram make LED Source . complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
155
-
1109800
Supplying and Fixing....40....mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts ,nuts and wiring using suitable capacity wires etc complete. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
155
-
187860
"supplying and installation/Fixing/Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent polycarbonate Lid, shock proof, IP65 (Weather Proof) rust proof, dust proof, water proof, corrosion proof, having internally Embedded gasket on both lid and flap suitable to fix Single phase/Three phase Energy Meter in suitable base plate and having a provision for Fuse/MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility.300mmx450mmx214mm. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
4
-
20508
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63Amps three phase 4 wire whole Class-1 Accuracy Energy Meter. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
9490
Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall stone structure or rawl plugs in case of brick walls and cement plastering damaged portion using heavy gauge saddles at an interval of 700mm using NF screws.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
50
-
3250
Supplying and drawing Flexible Multicore cable manufactured with electrolytic grade flexible copper conductor confirming to table 3 class 5 of IS;8130-1984 and PVC insulation and sheated suitable for working voltage up to 1100 volts as per IS-694;1990 & confirming to GTP of GROUP-B 3c x 2.5Sqmm complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
90
-
8100
Supplying of LED Floodlight with …. W System power consumption pressure die cast aluminum housing with powder coating with IP 65 protection.1.200-275V voltage with electronic Driver, PF>0.9 should meet ANSI 2G Vibration test, Compliance to UL/CE with class I. system rating shall be 50 K hrs. @ Lumen maintenance of 70% system efficacy >80lm/w Over load & short circuit protection ensures reliable operation in spite of problem in output side. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHs. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minized minimal tools. lED Light fixture with....W system power consumption . LED Efficiency>130lm/w at 1W & Fixture Efficiency>80lm/w with nominal CRI>75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008, Housing with supplier word mark /name shall be Engraved/Embossing on the die cast housing/Body part. Warrantly of 5 years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer. LED Floodlight 150W complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
4
-
41000
Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 19/20mm dia 2mm thick.
718
-
35900
Open Conduit System Supplying heavy gauge PVC conduit pipe …….dia .......mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc., and fixing using inverted wood plugs in case of RCC ceiling and RCC wall / stone structure or rawl plugs in case of brick walls and cement plastering the damaged portion using heavy gauge saddles at an interval of 700mm using NF screws. 25mm dia 2mm thick. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
830
-
53950
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary 19/20mm dia 2mm thick. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1104
-
44160
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 25mm dia 2mm thick.
2910
-
154230
Concealed Conduit System Supplying heavy gauge PVC conduit pipe ……mm dia ....... mm thick confirming to IS 2509 with suitable size bends, metal/PVC junction boxes, adhesive paste etc., and running before concreting the slab. The conduit should be tied to the reinforcement rods by using binding wires and unused ways of junction boxes and pipe ends should be covered using PVC end enclosures, run with 18SWG GI fish wire wherever necessary complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 32mm dia 2.5mm thick.
620
-
51460
Groove cutting in walls Supplying heavy gauge PVC Conduit Pipe ….dia ....mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 25mm dia 2mm thick
1819
-
98226
Groove cutting in walls Supplying heavy gauge PVC Conduit Pipe ….dia ....mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks and cement plastering up to the wall surface and run with 18 SWG GI fish wire run throughout the conduit wherever necessary. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 32mm dia 2.5mm thick
377
-
30537
Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
482
-
22654
Extra for Groove cutting in brick wall/CC floor to the suitable depth for concealing of Conduit/GI pipe and plastering, finishing upto wall surface complete. upto 50mm conduit in brick wall complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1393
-
29253
Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, screws at an interval of 300mm …. etc. as required.25mm complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1086
-
26064
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of thepi pe terminated completely 25mm complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
241
-
6748
Supplying PVC/GI flexible conduit pipe…mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF screws and on either end of thepi pe terminated completely 32mm complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
216
-
7560
Supplying And Fixing Metal Fan Box with Round Hook. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
221
-
18785
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work Short point upto 3Mtr from tapping point to out let via switch
417
-
66720
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work Medium point above 3M. upto 6M from tapping point to out let via switch
275
-
68750
Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to IS-694: and latest amendments) without control switch shall be fixed on the existing plastic sheet/ gang box, the other end of the wires shall be terminated with sufficient loose length in a wood/PVC round block. complete for each outlet.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work Long point above 6Mtr. upto 10M from tapping point to out let via switch
340
-
127500
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 1.5 sqmm
4990
-
102295
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 2.5 sqmm
3230
-
103360
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 4 sqmm
1172
-
52740
Supplying and flush mounting teak wooden box 12"x9"x3" (300x228x76mm) without front plank, made of not less than 12mm thick wood, after due groove cutting, necessary masonry patch work complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
172
Supplying and flush mounting teak wooden box 10"x7"x3" (254x178x76mm) without front plank, made of not less than 12mm thick wood, after due groove cutting, necessary masonry patch work complete. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
5
-
385
Supplying 6A flush/projected type socket and a 6 amps flush/ projected type SP switch either surface/flush mounting in a existing gang box or in a 4mm thick plastic sheet and fixing over a flush mounted wooden box and wiring using necessary capacity wires as required. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work��� 6Amps 3/5 Way
1
-
132
Supply and fixing of backlite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/ Hitches. Using Group 'A' Material. (ABB, seimens, L& T) 16Amps Combined switch and socket with indication complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
5
-
970
Supply and fixing of backlite D.P/Socket/ switch with/without neon indicator over existing wood board or flush mounting in plastic plates/Hitches. Using Group 'B' Material. (CG, HPL, C&S, HEVELS , INDO-ASIAN Eletronic stepped fan regulator complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1
-
286
Wiring for lighting/power circuit using 4 sqmm. PVC insulated 1100v grade, muftis and Copper conductor single core cable in open or concealed system of wiring Using Group A Materials. (FINOLEX, SBEE, RR KABLE, POLYCAB, HAVELLS, ANCHOR,V-GUARD) complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
90
-
4050
Supplying and fixing a drop light using one PBBC/bakelite pendent holder, PVC insulated twin twisted copper wire of 23/0.0076"upto 1 Mtr, one of 60/100 watts lamp of 230 volts grade and one of 5 amps bakelite ceiling rose fixed on the existing wooden block of the outlet.���� Group'B' WESTERM.POINTER, SKIN complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1
-
121
Supplying and fixing PBBC bakelite straight or slant batten holder and wiring, within 60w/230 Volts lamps Group 'A' LISHA, ANCHOR, CONA, ELLE, GM. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
176
Supply box type fluorescent tube light fitting of 1x4'-36/40Watts fluorescent tube fitting, made out of M.S sheet and stove enameled with low loss open construction copper wound ferromagnetic ballast, starter, locking type brass contact holders mounted on double fold type sheet base fully wired for use on 230 Volts A C Supply including fluorescent tube. ���Using Group 'A' Materials (PHILIPS, WIPRO, GE, HAVELLS ) complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
1340
Fixing all types and all capacities fluorescent/false ceiling/spot light/ CFL fittings indoor on the wall / ceiling/ rafters / girders using 23/ 0.0076" twin twisted PVC insulated wires, required nos of round blocks and clamps (if required)�� On wall/ ceiling/ Rafter Girders complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
196
Supplying Of Group C 72 Watts Light Emitting Diode (LED) Street Light Fittings fabricated with die cast alluminium base with suitable heat sink for heat dissipation. the fitting should comprise efficient electronic driver & LED 's (with 100-120 Lumens/LED ) completely wired to operate on 230V 50Hz AC Supply.( Certificate for driver performance & LED lumens output LM8O certificate should be furnished) cree/nichia make optically designed high efficiency LED Lights Should be used Polycarbonate transparent cover with IP-66 protection. (INCLUDING 50000 Burning Hours ) [ Alloy ML-24 ] complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1
-
18720
Supplying & fixing 40mm mm dia class A GI pipe bracket up to 2.7 meters long for fixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts and nuts and wiring using suitable capacity wires etc complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1
-
1140
Supplying and fixing regular MCB distribution boards on wall / woodboard /flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting etc., complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work�� 4Way SP &N Group 'B'
1
-
866
Supplying, fixing and wiring electronic 5 to 20Amps single phase Energy Meter.Group A complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1
-
1188
Supply and Installation / Fixing 300x300x2l4mm thermoplastic modular panel enclosure with transparent polycarbonate lid, shock proof, IP65 (Weather Proof) rust proof, dust proof, water proof, corrosion proof having internally embedded gasket on both lid and flap suitable to fix. Single phase/three phase energy meter in suitable base plate and having a provision for Fuse/ MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1
-
4266
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS-694:confirming to latest amendments. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 10 sqmm
120
-
13800
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 1-3Way
215
-
20425
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 4-5Way
4
-
420
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6 Way
300
-
37500
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 8 Way
3
-
435
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 10-12 Way
2
-
330
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 1 to 3 Module
197
-
21670
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 4 Module
4
-
500
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6 Module
308
-
53900
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 8 Module
2
-
400
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing metal/PVC box. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 10-12 Module
4
-
920
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6Amps one way
270
-
20250
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6Amps two way
216
-
20520
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6Amps 3way socket
201
-
21105
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6/16Amps universal socket
10
-
1620
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work Stepped Fan Regulator
224
-
64960
Supplying 50mm wooden plug, tapered from 50x50mm to 25x25mm and fixing by using binding wire before concreting a roof slab.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
5512
-
38584
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6-32 Amps SP.
190
-
82460
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898.complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 5-32 Amps DP.
199
-
180891
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capacity of 10K and complete wiring as required confirming to IEC 60898. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6-32 Amps TPN .
4
-
6860
Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase / 3 phase / single door with powder coated painting. Made out of 14 SWG MS enclosure.II - Double Door 6 way SP&N complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
129
-
167700
Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 12"x12"x2"
348
-
52200
Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 16Amps complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
188
-
28200
Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 20Amps single phase Class-1 Accuracy with Temper Proof Energy Meter
129
-
148350
Supply and Installation / Fixing / Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shock proof, IP65 (Weather Proof), rust proof, dust proof, water proof, corrosion proof having internally Embedded gasket on both lid and flap suitable to fix Single Phase / Three Phase Energy Meter in suitable base plate and having a provision for Fuse / MCB cutout with suitable transparent hinged flap opening for operating MCB along with complete tamper proof SEALING facility. 300mmx300mmx214mm complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
180
-
675720
Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit … The pit should be filled with equal proportion of salt and charcoal 150mm all-round the pipe to complete depth. The connection from the pipe to the conduit etc., is to be established through GI wire of size as per ISI specification 7.3.3. of IS 732 using 12mm dia bolts, nuts, washers and check nuts etc., the pipe shall have 16 through holes of 12 mm dia complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
72
-
215978.4
Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2840
-
289680
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 2 core 10 sqmm
2785
-
264575
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5% and resistivity 14 Ohms/Kms (Max) as per IS-3975 complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 4 core 10 sqmm
130
-
16900
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6 sqmm to 16 sqmm
2805
-
33323.4
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required.In existing trench/duct. On wall structure. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work 6 sqmm to 16 sqmm
2865
-
85950
Providing and filling sand in excavated trench to cover already laid UG cable to a depth of 150mm all-round the cable. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2845
-
284500
Supplying of Ceiling Fan with Capacitor rating As per guideline of BEE 5 star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220 V/ 50 Hz, Rated power input 48 W +/- 10 %, Rated current As per IS:374/79, Rated power factor 0.9 lagging(min), Rated speed 350 +/- 10% RPM, Rated air delivery 210 +/- 10% Cubic Meter Minimum, Rated service value ≥ 4.2 CMM / Watt, Three Blades of blade leaf 1.05mm thick Aluminium Alloy sheet, Class B motor insulation,Bearing Two ball bearings, Top 6202, Bottom 6201 , as per IS specification, Motor wdg. Temp rise Shall not exceed 75 degC over and ambient of 40 0C by resistance method at 245Volts, Insulation resistance Shall not be less than Two Mega Ohms (2 M Ohms), Leakage current Should not exceed 210Micro Amp, Power input, watt& current , Air Delivery & Fan Speed as per IS:374/1979 with latest amendment, 2 year manufacturer Warranty 48" Sweep 5 Star (1200mm) complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
225
-
652500
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete.15" Sweep complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
4
-
16000
Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x 2' - 9/10w complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
275
-
68750
Supplying of ......feet - PVC Batten with integrated LED tube .....W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition. LED light fighting 1 x 4' - 20/22w complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
278
-
104250
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycarbonate material, delivering superior light output. Rated life Burning Hrs 50000 hr @ Lumen Maintenance of 70%, maximum light intensity should be between 60 degrees to 70 degrees. CCT > 5500K, IP 66 optical and electrical compartment & impact resistance of complete luminaire > IK08. Power Factor >0.9 with mains, Surge Protection- Min 5KV along with Over voltage/ Overload, short circuit/ miss-wiring protection. Compatible for pole mouting with outer dia of 40mm to 50mm. Universal Voltage driver to operate wide voltage range from 100V to 270V 50/60Hz application. Compliance to IS 10322/IEC 60598, LM 79 & LM 80 Adherence with RoHS. UL approved MCPCB. Top access street light with single screw to ensure ease of maintenance at the sight site location with minimized minimal tools. LED Light fixture with ........W System Power consumption. LED Efficiency>130lm/w, nominal CRI >75. Luminaire manufacturer should have in-house facility accredited by NABL/CPRI & any Government certified agency & Design & Development facility certified by ISO 9001:2008 . Housing with supplier word mark /name shall be Engraved / Embossing on the die cast housing/ Body part. Warranty of 2 Years against any manufacturing defect working under standard electrical conditions as mentioned above should be given by LED manufacturer & Cree/Nichia/ Lumileds/Osram make LED Source. LED Streetlight 120 Watts complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
18400
Supplying and Fixing........mm dia class A GI pipe bracket up to 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed forfixing MV/SV/MH/FTL street light fitting of all capacities on rail/RCC/wall/tubular pole, using suitable clamps, bolts, nuts and wiring using suitable capacity wires. Using 25mm dia G.I.Pipe complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
1944
Fixing halogen/metal halide / SVL / IL / LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
350
Supplying and fixing of class A (medium duty) GI pipe of wall thickness not less than 3.25mm on pole/wall/drain crossing with necessary clamping arrangements for UG cable of 1.1 KV. Using 50mm dia G.I.Pipe complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
124
-
47120
Fixing all types and all capacities of fluorescent / false ceiling/ spot light / CFL / LED fittings indoor on the wall / ceiling /rafters / girders using 23/0.0076” twin twisted PVC insulatedwires, required Nos of round blocks and clamps. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
555
-
61050
Fixing one exhaust fan in the nitch already left in the wall with bolts and nuts and 5 amps. ceiling rose with sufficient length of 23 / 0.0076 inch PVC insulated twin core wire.. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
13
-
2080
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 amps. ceiling rose of approved quality with necessary length of 23 / 0.0076 inch PVC insulated twin twisted wire of approved quality, mounted on a suitable size wooden board and wired. complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
225
-
58500
Supplying and errrection of 60 MT Weigh Bridge Platform with all accessories complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
1
-
1075000
Double Pole TC Set for erection of Transformer on RCC/ PSCC 9 Mtr long. For 25/63/100kVA, 4/5 Star Rated Transformer using 9 Mtr RCC Pole 145Kg WL - complete as per specification with leads and lifts as per the direction of the Engineer in charge of the Work
2
-
27214
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements