Agricultural Produce Market Committee Tender

KSRB 4.2.2 : Providing and laying in position reinforced cement concrete of design mix M20 with OPC cement @320Kgs, with 20mm and down size graded granite metal coarse aggregate @0.69cum and fine aggregate @ 0.46cum with superplastisiser @3ltrs confirming to IS 9103-1999 Reaffirmed-2008, machine mixed, concrete laid in layers not exceeding 15 cms thick, vibrated for for all works in foundation for footings,pedastals, retaining wall,return walls,(any thickness) including attached pilesters,coloumn pillars,posts,struts,bed blocks,anchor blocksand plinth etc,., including cost of all materials, labour, HOM of machinery, curing, complete as per Specifications but Excluding cost of reinforcements as per Specification with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

KSRB 4-6.7 :Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for sides and soffits of beams, beam haunchings, cantilever girders, bressumers and lintels not exceeding 1m in depth including cost of all materials, labour complete as per specificaitons. . with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

KSRB 4.9.2 : Providing TMT Steel Bars Fe 500 reinforcement for R.C.C work including straightening, cutting, bending, hooking, placing in position, lapping and / or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall not be measured and paid) cost of materials, labour, HOM of machinery complete as per specifications. with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

KSRB 6-1.3 : Providing and constructing burnt brick masonry for basement and superstructures with approved quality of non-modular bricks of standard size of class designation 3.5Newton per sqmm with cement mortar 1:6 including cost of materials, labour charges, scaffolding, curing complete as per specifications with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

KSRB 7.5 : Providing and fixing pull and push type rolling shutters of approved make out of 18 guage, 75mm wide cold rolled steel laths of convex corrugation, with side guides and bottom rail, with interlocking arrangements for steel laths by means of alternate clips, suspension shaft with High tension coil type springs two numbers, mounted on specially designed pipe shaft, with bracket plates, guide channels, ball bearing arrangements, for inside & outside locking with push & pull operations complete including pulling hooks, 4Nos. handles with all fittings and accessories, painted with a coat of red lead paint (without top cover) cost of materials, labour, HOM of machinery complete as per specifications with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

KSRB 7.8 : Providing and fixing in position in cement concrete 1:3:6 steel glazed windows and ventilators side hung/top hung fully 2/3Openable1/3 fixed as per approved drawings using Z angles of 25x33x3mm, weighing 1.419 Kg/m both for outer and inner frames and central mullion section of size 25x46x3mm. weighing 2.28Kg/m duly providing T section 19x19x3mm weighing 0.839 kg/m for glazing of windows not more than 34 cms. c to c including providing and fixing 4mm. thick reeded glass with teakwood beading of required size, all steel sections should confirm to I.S 7452:1990, 4nos. of holdfasts of approved size, section should be cut to length welded and electrically grinded subdividing frames of unit shall be tenonned and revetted into the frames electrically. All the steel surface shall be throughly cleaned free of rust and painted with one coat of anti-corosive paint and finishing with two coats of ready mix paint of approved colour and make including cost of materials, fixtures, labour and HOM of machinery complete as per specifications complete as dircted by the Engineer-In-Charge of work

KSRB 7.9:Providing and fixing MS Grill work for windows and ventilators usingMS Flats or MS square rods or combination of M.S flats and squares rods as per approved design drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer,cost of materials fixtures,labours and HOM complete as per specifications complete as dircted by the Engineer-In-Charge of work

Fabricating, supplying and erecting M.S. TubularTruss of span upto 10m. The bottom and top member is provided with 50x50x6mm double equal angles, welded back to back and in between top and bottom line, in areas of mid section is provided with 50x50x6mm equal single angle for vertical and inclined members and at supporting ends 40x40x5mm single angle is provided. All the members are welded together with 6mm gusset plate as per Drawing. The entire truss is anchored in RCC column by using 4 Nos. of M.S. anchor bolts at each support, with 10mm thick base plate and shoe plate.The work includes cutting, straightening, placing in position of M.S angle and wleding wherever necessary, and applying one coat of red oxide primer coat to all themembers including cost of all materials, labour charges, and hire charges of machineries for cutting, welding, grinding and erection equipments, with all lead and lift, transportation, etc., complete as per specification with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

Providing and installing of pre painted Galvolume iron Trapezoidal profiled sheet of approved make 1060 mm width (1000 mm cover width), 28-30 mm crest height with crest distance of 200 mm c/c with 2 ribs at the centre for stiffening. The total coated thickness (TCT) of the sheet will be 0.47 mm +/- 0.02 mm tolerance Zinc-Alu Alloy coating AZ150 gsm as per ASTM 1397/A755-550 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 20-22 microns using self drilling/self tapping screws of 25 mm length, to be fixed over the existing purlins, rafters, channels and trusses with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

KSRB15-3 :Providing 12mm thick cement plaster in single coat with cement mortar 1:6, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

KSRB 15-16.1 : Providing and finishing external walls in two coats with waterproof cement paint with primer of approved brand and shade to give an even shade after throughly brooming the surface to remove all dirt and loose powdered material, free from mortar drops and other foreign matter cost of materials, labour, complete as per specifications. with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work

KSRB 15-18.2 : Providing and applying enamel metal paint two coats (excluding priming coat) over new steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter,including cost of materials, labour, complete as per specifications with all lead and lift etc., complete as dircted by the Engineer-In-Charge of work